High uric acid levels cause different clinic conditions. One of them is hyperuricemia, which leads to kidney damage. A solution for eliminating uric acid in the blood is by hemodialysis, which is performed using nanocomposite membranes. In this work, Nylon 6 nanocomposites were synthesized with modified carbon black (MCB), which were considered candidate materials for hemodialysis membranes. The modification of carbon black was made with citric acid using the variable-frequency ultrasound method. The new MCB was characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), transmission electron microscopy (TEM), and dispersion tests. Nylon 6/MCB nanocomposites were processed using the ultrasound-assisted melt-extrusion method to improve the dispersion procedure of the nanoparticles. The Nylon 6/MCB nanocomposites were characterized by FTIR, TGA, and differential scanning calorimetry (DSC). These were assessed for the absorption of toxins and hemocompatibility. MBC and nanocomposites showed excellent uric acid removal (78–82%) and hemocompatibility (1.6–1.8%). These results suggest that Nylon 6/MCB nanocomposites with low loading percentages can be used on a large scale without compatibility problems with blood.

Approximately 200,000 tons of water contaminated with dyes are discharged into effluents annually, which in addition to infectious diseases constitute problems that afflict the population worldwide. This study evaluated the mechanical properties, surface structure, antimicrobial performance, and methylene blue dye-contaminant adsorption using the non-woven fabrics manufactured by melt-blowing. The non-woven fabrics are composed of nylon 6 (Ny 6) and zinc oxide nanoparticles (ZnO NPs). The polymer nanocomposites were previously fabricated using variable frequency ultrasound assisted-melt-extrusion to be used in melt-blowing. Energy dispersion spectroscopy (SEM-EDS) images showed a homogeneous dispersion of the ZnO nanoparticles in nylon 6. The mechanical properties of the composites increased by adding ZnO compared to the nylon 6 matrix, and sample Ny/ZnO 0.5 showed the best mechanical performance. All fabric samples exhibited antimicrobial activity against S. aureus and fungus C. albicans, and the incorporation of ZnO nanoparticles significantly improved this property compared to pure nylon 6. The absorption efficiency of methylene blue (MB), during 60 min, for the samples Ny/ZnO 0.05 and Ny/ZnO 0.25 wt%, were 93% and 65%, respectively. The adsorption equilibrium data obeyed the Langmuir isotherm.

The development of materials for uremic toxin removal is under continuous research. In this work, a natural zeolite (clinoptilolite) was modified using tartaric acid through two different methods: conventional reflux heating and ultrasound energy. The resulting materials were used as an adsorbent material for the removal of uremic toxins such as urea, creatinine, and uric acid. In the uremic toxin removal study, it was observed that the material modified using ultrasound for 100 min had the highest removal values (74.49%, 40.31%, and 51.50% for urea, creatinine, and uric acid, respectively), while unmodified zeolite removed 30.57%, 18.07%, and 22.84% of the same toxins. The best results for conventional heating modification were 67.08%, 31.97%, and 32.39%, respectively. Therefore, acid group incorporation considerably improved the adsorption properties of the clinoptilolite. Regarding adsorption kinetics, it was found that the pseudo-second-order model better described the behavior of all the modified materials. Equilibrium adsorption data were adjusted to the Langmuir and Freundlich models. The Freundlich model (multilayer adsorption) described urea adsorption, while the Langmuir model (monolayer adsorption) described creatinine and uric acid.

The flammability properties of polymers and polymeric composites play an important role in ensuring the safety of humans and the environment; moreover, flame-retardant materials ensure a greater number of applications. In the present study, we report the obtaining of polypropylene (PP) composites contain a mixture of two green flame retardants, lignin and clinoptilolite, by melt extrusion. These additives are abundantly found in nature. Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), mechanical properties, scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM-EDS), cone calorimetry, UL-94, and carbonized residues analysis were carried out. TGA analysis shows that PPGFR-10 and PPGFR-20 compounds presented better thermal stability with respect to PP without flame retardants. The conical calorimetric evaluation of the composites showed that PPGFR-10 and PPGFR-20 presented decreases in peak heat release rates (HRRs) of 9.75% and 11.88%, respectively. The flammability of the composites was evaluated with the UL-94 standard, and only the PPGFR-20 composite presented the V-0 and 5VB classification, which indicates good flame-retardant properties. Additives in the polymer matrix showed good dispersion with few agglomerates. The PPGFR-20 composite showed an FRI value of 1.15, higher percentage of carbonized residues, and UL-94 V-0 and 5VB rating, suggesting some kind of synergy between lignin and clinoptilolite, but only at high flame-retardant concentrations.

In this study, polysulfone-based nanocomposites with carbon black (CB) nanoparticles were fabricated to evaluate their urea-removal properties. The nanocomposites were obtained using two different methods: solution mixing and melt extrusion. These materials were evaluated using Fourier transform infrared spectroscopy (FTIR), which allowed for the identification of the corresponding functional groups within the polysulfone polymer matrix. X-ray diffraction (XRD) analysis was performed, confirming the amorphous structure of the polysulfone. The addition of modified carbon black shifted the most intense peak of the polysulfone. Thermogravimetric analysis (TGA) showed an increase in thermal stability with the addition of different concentrations of modified carbon black for solution-mixing method. Scanning electron microscopy (SEM) revealed that the melt-extrusion method presented a better dispersion of the nanoparticles, since large agglomerates were not observed. Additionally, a urea adsorption study was conducted, obtaining removal percentages of 76% and 72% for the extrusion and solution-mixing methods, respectively. It was demonstrated that the nanocomposite can be used for up to five cycles without losing urea-removal efficiency, whereas the efficiency of pure polysulfone decreases as the number of cycles increases. Finally, the hemolysis test was performed, and the nanocomposites showed less than 1% hemolysis, indicating that the material is non-hemolytic.

Wastewater can be reused in industrial processes, for domestic activities, and for agriculture. This is a strategy to address the global water shortage. Consequently, there is an ongoing search for new materials that can effectively remove contaminants from wastewater, as dyes are considered persistent pollutants. This study synthesized films based on polysulfone with chemically modified ZnO nanoparticles by the sonochemical method for application as an adsorbent material for indigo and crystal violet. The films were characterized by Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD), Thermogranimetric analysis (TGA), and Scanning Electron Microscopy (SEM); changes were observed with the incorporation of the nanoparticles. The results reveal that the films achieved a dye removal of 80 mg/g. The crystallite size was measured using the Scherrer equation for the polysulfone (PSF) sample, which was 0.024 nm, and using the same method the result obtained was 0.048 nm for the PSFZNO2 sample. The modification with L-serine is novel, as it is an amino acid and a non-toxic substance for the human body. There are few studies on this type of reagent regarding the modification of nanoparticles to provide them with different functionalities. This work was carried out in accordance with the principles of green chemistry, specifically using ultrasound technology, which promotes principles 6 and 9 by reducing energy consumption through the use of lower temperatures and short reaction times. Principles 2 and 3 are also addressed by modifying the surface of the nanoparticles directly. This process eliminates the need for intermediate steps or the use of highly toxic reagents.