Hydrothermal pretreatment (HP) is an eco-friendly process for deconstructing lignocellulosic biomass (LCB) that plays a key role in ensuring the profitability of producing biofuels or bioproducts in a biorefinery. At the laboratory scale, HP is usually carried out under non-isothermal regimes with poor temperature control. In contrast, HP is usually carried out under isothermal conditions at the commercial scale. Consequently, significant discrepancies in the values of polysaccharide releases are found in the literature. Therefore, laboratory-scale HP data are not trustworthy if scale-up or retrofitting of HP at larger scales is required. This contribution presents the results of laboratory-scale batch HP for wheat straw in terms of xylan and glucan release that were obtained with rigorous temperature control under isothermal conditions during the reaction stage. The heating and cooling stages were carried out with fast rates (43 and −40 °C/min, respectively), minimizing non-isothermal reaction periods. Therefore, the polysaccharide release results can be associated exclusively with the isothermic reaction stage and can be considered as a reliable source of information for HP at commercial scales. The highest amount of xylan release was 4.8 g/L or 43% obtained at 180 °C and 20 min, while the glucan release exhibited a maximum of 1.2 g/L or 5.5%. at 160 °C/180 °C and 30 min.

In nature, sensory stimuli are organized in heterogeneous combinations. Salient items from these combinations 'stand-out' from their surroundings and determine what and how we learn. Yet, the relationship between varying stimulus salience and discrimination learning remains unclear.

Plant growth-promoting bacteria (PGPB) have been largely considered as beneficial in harsh and limiting environments given their effects on alleviating plant stress. For practical applications, most of the PGPB are prepared in immobilization matrices to improve the stability and benefits of bacteria. Despite the long list of immobilizing agents/carriers tested to date, a long list of desired requirements is yet to be achieved. Here, lignin stands as a scarcely tested immobilizer for bioinoculants with great potential for this purpose. The aim of this work was to demonstrate the feasibility of lignin as a carrier of the nitrogen-fixing Azospirillum brasilense. These bacteria were cultured in liquid media with recovered organosolv lignin added for bacterial immobilization. Then, lignin was recovered and the immobilized biomass was quantified gravimetrically by DNA extraction and serial dilution plating. Fluorescent microscopy as well as Congo red agar plating showed the immobilization of the bacterial cells in the lignin matrix and crystal violet dyeing showed the biofilms formation in lignin particles. A high number of cells were counted per gram of dried lignin. Lignin can be readily used as low-cost, health-safe bioinoculant carrier to be used in soil and agricultural applications.