This study presents an innovative strategy for the electrochemical degradation of methylene blue (MB) using 3D-printed helical anode electrodes fabricated from commercially available conductive Polylactic acid/carbon black (PLA/CB) filaments. The choice of PLA/CB is particularly significant, since the amorphous PLA matrix combined with a percolating carbon black network provides a biodegradable, low-cost, and chemically versatile polymer composite that can be transformed from a simple prototyping filament into a functional electrochemical platform. Through a combination of chemical/electrochemical activation and electrodeposition of copper nanoparticles (Cu NPs), the polymer electrodes were successfully converted into highly efficient catalytic platforms. Beyond material functionalization, the influence of electrode geometry was systematically investigated, comparing single-, double-, and triple-spiral helical configurations. The double-spiral geometry proved the most effective, offering the best balance between active surface area and electrolyte flow dynamics. Under mild conditions (2 V, pH 6, 0.1 M NaCl), the system achieved up to 97% MB removal, while also demonstrating remarkable stability and reusability over at least ten consecutive cycles. These results highlight the synergistic role of polymer chemistry, arrangement, and metal decoration, demonstrating how 3D printing can be a useful platform for the easy production of electrodes with different geometries, even starting from simple conductive filaments reused in sustainable and scalable functional materials for advanced wastewater treatment.
MnO is an attractive material due to its high specific capacitance and thermal and chemical activity. It can be recycled from alkaline batteries with a good yield and can be used for supercapacitor applications after enhancing its poor conductivity. In this study, Ru-MnO-Carbon nanofibers(Ru-MnO-CNFs) were prepared by the impregnation of Ru (1 wt%) into MnO recovered from used alkaline batteries, followed by their incorporation into polyacrylnitrile (PAN) nanofibers by electrospinning and carbonization. The prepared materials, Ru-MnO and Ru-MnO-CNFs, were characterized by scanning electron microscopy and Fourier infrared spectroscopy. The electrochemical characterization was performed, comparing the characteristics of Ru-MnO and Ru-MnO-CNFs samples. It was found that the capacitance of MnO recovered from used alkaline batteries could be enhanced by combining it with Ru and CNFs. The hybrid Ru-MnO/CNFs composite could be used as stable electrode material for high performance supercapacitors.