Rapid urbanisation and the associated infrastructure development are creating a deficit of conventional construction materials and straining the natural resources. On the other hand, municipal solid waste (MSW) disposal poses a serious environmental problem. Landfilling of MSW is both costly and polluting. Incineration of MSW to generate energy is a commonly adopted approach. However, there are concerns associated with micro pollutants emitted from the combustion process. The carbon footprint of the process and the environmental cost–benefit balancing are disputable. There is clearly a need to adopt cost-effective alternatives to treat MSW. This paper proposes the potential application of “treated” MSW as an ingredient for construction materials. The treatment process involves placing MSW in an autoclave at 150 °C with 5 bars (0.5 MPa), followed by the separation of metals, plastics and glass for recycling purposes. The end-product, which is a semi-organic mixture (referred to as ‘biomass’), is passed through a vortex-oscillation system, which makes it more uniform as a material. Compressive testing of Portland cement-based pastes containing 10% and 15% biomass shows consistency in the results, demonstrating the potential use of biomass in construction materials.
To address sustainability issues by facilitating the use of high-volume fly ash (HVFA) concrete in industry, this paper investigates the early age hydration properties of HVFA binders in concrete and the correlation between hydration properties and compressive strengths of the cement pastes. A new method of calculating the chemically bound water of HVFA binders was used and validated. Fly ash (FA) types used in this study were sourced from Indonesia and Australia for comparison. The water to binder (w/b) ratio was 0.4 and FA replacement levels were 40%, 50% and 60% by weight. Isothermal calorimetry tests were conducted to study the heat of hydration which was further converted to the adiabatic temperature rise. Thermo-gravimetric analysis (TGA) was employed to explore the chemically bound water (WB) of the binders. The results showed that Australian FA pastes had higher heat of hydration, adiabatic temperature rise, WB and compressive strength compared to Indonesian FA pastes. The new method of calculating chemically bound water can be successfully applied to HVFA binders. Linear correlation could be found between the WB and compressive strength.
The utilization of high-volume fly ash (HVFA, ≥50% cement replacement) in concrete is pivotal for sustainable construction but hindered by low early-age strength. This study investigates the individual and combined effects of hydrated lime (HL) and calcium formate (CF) on the strength development, hydration kinetics, and microstructure of HVFA pastes (60% and 70% FA). Individual additions of 11% HL (HVFA60) or 14% HL (HVFA70) raised 28-day compressive strength by 18% and 22%, respectively, and shortened final setting from 10.0 h to 3.8 h. Similarly, 3% CF increased 28-day strength by 15% (HVFA60) and 12% (HVFA70) while cutting final setting to 2.1 h and 3.3 h. In contrast, combining HL and CF suppressed strength by 15–22% despite accelerating final setting to less than 1 h. Isothermal calorimetry showed a 40% reduction in cumulative heat release at 44 h for the combined system. XRD, TGA and SEM confirmed 20–30% lower C-S-H content, 25% less CH, and a rise in porosity when HL and CF were used together. These findings demonstrate that HL and CF act as competing accelerators, where rapid heat release compromises microstructural integrity. For practical applications using HVFA materials, individual use of HL or CF is recommended to enhance early-age performance, while combined application should be avoided to prevent strength reduction.