Andre Souza

Dr. Andre Souza

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 June 2022 in Journal of Optical Communications and Networking
Verified
Journal Article
Closed access
PDF file
ASAndre Souza
Andre Souza
NCNelson Costa
Nelson Costa
JPJoao Pedro
Joao Pedro
JPJoão Pires
João Pires
Multiband (MB) optical fiber transmission systems can unlock additional capacity in existing optical fiber infrastructures, enabling them to keep up with the increase in traffic demand while postponing costly optical fiber deployments. However, due to the worse transmission characteristics of MB systems than C-band-only transmission, the network’s overall spectral efficiency decreases when increasing the transmission bandwidth. The extent of this performance degradation is paramount to determining the commercial viability of deploying MB systems. By estimating the generalized signal-to-noise ratio using the GNPy library, this work analyzes the impact of using counterpropagating Raman amplification to improve the performance of an S + C + L -band transmission system comprising a total bandwidth of 15.5 THz. Raman amplification is proposed to mitigate the worse system performance resulting from the stimulated Raman scattering effect and the worse noise figure of the S-band optical amplifier. We show that the optimized deployment of a counterpropagating Raman pump makes it possible not only to improve but also to equalize the network-wide optical performance of the S + C + L -band transmission system, which potentially reduces the complexity of routing and wavelength assignment algorithms. The capacity, spectral efficiency, and number of feasible lightpaths of the S + C + L -band system are compared with C- and C + L -band systems with and without Raman amplification on two reference networks. Results show that the spectral efficiency of the S + C + L -band system with Raman amplification is similar to the C-band-only system without Raman amplification. These results provide evidence that this strategy can be effectively used to compensate for the worse transmission characteristics of MB systems, the higher noise figure of the S-band optical amplifier, the SRS effect, and the additional losses from the band demultiplexer and coupler required at every amplification stage to separate the transmission bands. Overall, the simulation results highlight that a single optical fiber can approximately carry the same data when using a 15.5 THz transmission band (and Raman amplification) as three parallel fibers using C-band-only transmission (without Raman amplification).

19 April 2022 in Journal of Lightwave Technology
Verified
Journal Article
Open access
RSRasoul Sadeghi
Rasoul Sadeghi
Bruno CorreiaBruno Correia
Bruno Correia
ASAndre Souza
Andre Souza
NCNelson Costa
Nelson Costa
JPJoao Pedro
Joao Pedro
VCVittorio Curri
Vittorio Curri
Multi-band optical fiber transmission is generally proposed for capacity upgrades in optical transport networks. To comprehensively assess the potential of multi-band transmission, key metrics such as the potential capacity increase, energy consumption, and the number of required interfaces must be evaluated for different transmission scenarios. We consider progressive spectral exploitation, starting from the C-band only and up to C+L+S+U-band transmission, for both transparent and translucent solutions that exploit optical signal regeneration. By considering accurate state-of-the-art physical layer models, we derive a networking performance metric that enables the comparison of different solutions in terms of capacity allocation and energy consumption. For a translucent network design, different regenerator placement algorithms are compared, with the aim of minimizing energy consumption. The proposed network-wide numerical analysis shows that, for spectral occupations exceeding the C+L-band, translucent solutions can significantly increase network capacity, while leading to a similar energy consumption per transmitted bit as in the transparent design case, but they require the deployment of additional line interfaces. Significantly, these results provide evidence that the transparent exploitation of an additional transmission band produces a capacity increment that is at least comparable to that of a translucent solution based on already-in-use bands. Since this is attained at the expense of fewer line interfaces, it is a key finding suggesting that extending the number of bands supported is a cost-effective approach to scaling the capacity of existing fiber infrastructures.

6 September 2023 in Journal of Optical Communications and Networking
Verified
Journal Article
Closed access
ASAndre Souza
Andre Souza
NCNelson Costa
Nelson Costa
JPJoao Pedro
Joao Pedro
JPJoão Pires
João Pires
Due to the high potential of multi-band transmission (MBT) systems as a short- to medium-term solution to the ever-increasing demand for fiber capacity, one of the recent areas of research concerns the development of fast but still accurate models to estimate the quality of transmission (QoT) in these systems, since this capability will be paramount for efficient and cost-effective network planning and operation. However, accurately evaluating the QoT of MBT systems with moderate computational complexity is challenging, mainly because stimulated Raman scattering (SRS) becomes a major transmission impairment. Although several models have been proposed in the literature, to the best of the authors’ knowledge, there is a lack of a comprehensive comparison of the advantages and main limitations of the available methodologies. Therefore, this work analyzes the computational time and accuracy of several QoT estimation methods suitable for MBT systems [closed-form interchannel SRS Gaussian noise (ISRS-GN) and four-wave mixing (FWM) models], focusing on transmission systems comprising a total transmission bandwidth of up to 20 THz, which includes not only the C- and L-bands but also a part of the complete S-band. We also propose a modification to the FWM model to take into account the SRS effect in the calculation of the nonlinear interference, referred to as the enhanced FWM (eFWM) model. We show that the closed-form ISRS-GN model has the best trade-off between computational complexity (speed) and accuracy for launch powers per channel up to 4 dBm in a system with 10 spans and with span lengths varying from 50 km to 100 km. However, this method shows generalized signal-to-noise ratio estimation errors as high as 1.5 dB for higher launch powers. Similar conclusions were drawn when using the models to optimize the launch powers in the reference Italian backbone network, i.e., using the closed-form ISRS-GN model leads to more accurate optimized launch powers. However, in this case, the impact on the network-wide average channel capacity of using the launch power optimized using the different approaches is negligible.

17 January 2024 in Journal of Optical Communications and Networking
Verified
Journal Article
Closed access
ASAndre Souza
Andre Souza
Bruno CorreiaBruno Correia
Bruno Correia
ANAntonio Napoli
Antonio Napoli
VCVittorio Curri
Vittorio Curri
NCNelson Costa
Nelson Costa
JPJoão Pires
João Pires
We examine the cost associated with increasing traffic on a reference transport network for both single- and multiband systems, with a total transmission bandwidth ranging from 4.8 to 20 THz (S2 + S1 + C + L-band, where S2 and S1 are the two halves of the S-band). The number and cost of amplifiers, transceivers, and fibers are considered. To ensure stable transmission power and simplified network management, we take noise loading into account. The optimal combination of transmission bands—for each system—is evaluated based on the maximization of the capacity calculated from the minimum per-band generalized signal-to-noise ratio of each band. The results reveal that, despite the lower spectral efficiency due to the higher fiber attenuation and band MUX/DEMUX insertion losses, multiband systems can effectively reduce the number of fibers needed, thus postponing the deployment of new fibers. The most cost-effective solution depends on the fiber and S-band amplifier costs and the forecast of the required network capacity. When additional fibers are freely available or fiber costs are minimal, employing a C-band-only system proves to be the most economical choice. As fiber costs increase, additional bands gradually become more appealing, progressing from the C-band-only to the C + L-band, and then to the addition of half of the S-band (S1 + C + L-band) or the whole S-band (S2 + S1 + C + L). Furthermore, multiband transmission systems are more attractive when considering higher traffic loads. We also propose an optimal order of deployment of transmission bands in a pay-as-you-grow approach. The corresponding cost evolution demonstrates that this approach is a viable solution to mitigate excessive costs during the initial stages of a network operation, even though it leads to an increased number of fibers and transceivers used before all transmission bands are enabled. Additionally, we show that the S1- and S2-bands have worse optical performance, making them more suitable for shorter lightpaths. Consequently, operating the S-band in single-hop links and simplifying the add-drop multiplexer architecture could be beneficial.

24 October 2024 in Journal of Optical Communications and Networking
Verified
Journal Article
Closed access
ASAndre Souza
Andre Souza
NCNelson Costa
Nelson Costa
JPJoao Pedro
Joao Pedro
JPJoão Pires
João Pires
We propose an innovative optimization framework using a multi-objective genetic algorithm to simultaneously optimize the launch power profile and design Raman amplifiers. Its flexibility allows us to find better solutions and reduce the number of Raman pumps. Moreover, we utilize the framework to compare the potential of four multi-band transmission systems leveraging hybrid fiber amplification. Simulation results highlight that complementing a C + L-band system with the S-band leads to higher total system capacity than using the E-band or interleaving data channels and Raman pumps.

1 December 2021 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
Verified
Journal Article
Open access
SRSandro Marcelo Rossi
Sandro Marcelo Rossi
TSTiago Sutili
Tiago Sutili
ASAndre Souza
Andre Souza
RFRafael Carvalho Figueiredo
Rafael Carvalho Figueiredo