Guar gum (GG), a biodegradable and biocompatible polysaccharide, exhibits limited stability in its hydrogel form. To overcome this, semi-interpenetrating polymeric networks (semi-IPN) were engineered by synthesizing a Diels-Alder (DA) polymer (Polymer 1) from a difurfuryl monomer (Di-Fur, derived from L-tartaric acid) and a dimaleimide (Di-Mal, from 1,8-diamine-3,6-dioxaoctane) within a GG solution (Polymer 2). Controlled crosslinking was achieved by introducing a novel trifunctional crosslinker (Tri-Fur), containing three furan rings and synthesized from D-ribonolactone. By optimizing the Tri-Fur concentration, maximum crosslinking degrees (Xr) of 4 % and 10 % were attained, yielding GG-Xr4 and GG-Xr10, respectively. Polymer 1 demonstrated thermal degradation at 60 °C, releasing maleimide units that undergo rapid Michael addition, indicating reversible and self-healing properties. Rheological studies confirmed that the materials were gelatinous and stable for 14 days at 25 °C, maintaining integrity from 24 to 60 °C, with complex viscosity notably increasing between 24 °C and 37 °C (e.g., GG-Xr4: 139 to 619 Pa·s), supporting potential for injectable formulations. SEM revealed nanoporous structures (GG-Xr4: 530 nm mean pore size). The materials retained mucoadhesive properties and enabled drug loading and release, enhancing GG's biomedical and pharmaceutical potential.
This study introduces a single-step method to synthesize guar gum-based interpenetrating polymer network (IPN) hydrogels, achieving simultaneous Diels–Alder crosslinking and amoxicillin (AMOX) encapsulation under mild conditions. To evaluate the influence of porogen addition on IPN structure, drug loading and release, twenty-one formulations were developed, including AMOX loading (25% or 40% w/w relative to the polymer) and biocompatible porogens incorporation [polyethylene glycol (PEG) or sucrose at 5%, 10%, or 50% w/w]. All crosslinked IPN hydrogels formed robust gels, unlike non-crosslinked controls. Porogen choice strongly influenced hydrogel performance: PEG quadrupled the swelling index while enhancing storage modulus (up to 10,054 Pa) and complex viscosity (up to 1302 Pa·s), whereas high sucrose concentrations produced soft, ductile networks with critical strains above 20% and swelling indices up to 1895%. All hydrogels released AMOX at levels above MIC50 for H. pylori. PEG-based IPN provided superior drug delivery profiles, with extended AMOX release (t50 up to 15.5 h at pH 5.0), while sucrose-rich matrices exhibited faster burst release and disintegration. Single-step (pre-loading) AMOX during synthesis improved release control compared to post-loading. These findings highlight the potential of one-pot IPN synthesis with porogen modulation offering a promising gastroretentive platforms for sustained AMOX delivery against H. pylori.
Tissue engineering is a multidisciplinary field that aims to address tissue and organ failure by integrating scientific, engineering, and medial expertise. Gelatin is valued in this field for its biocompatibility; however, it faces thermal and mechanical weaknesses that limit its biomedical utility. This work proposes a strategy for improving gelatin properties by fabricating semi-interpenetrating polymer networks via in situ Diels–Alder crosslinking within gelatin colloidal solutions. Ten systems with variable polymer concentrations (2–4%) and crosslinking degrees (2–5%) were prepared and characterized. Rheological analysis revealed that elastic modulus, zero-shear viscosity, and complex viscosity were substantially enhanced, being especially dependent on the crosslinking degree, while critical strain values mostly depended on gelatin concentration. The incorporation of a synthetic Diels–Alder-crosslinked network also improved the thermal stability of gelatin hydrogels, particularly at physiological temperatures. Additionally, these systems exhibit favorable buoyancy, swelling and biodegradation profiles. Collectively, the resultant hydrogels are cytocompatible, solid-like, and mechanically robust, allowing for further tunability of their properties for specific biomedical uses, such as injectable matrices, load-bearing scaffolds for tissue repair, and 3D bioinks.
IdUS es el repositorio institucional de la Universidad de Sevilla que da acceso a los textos completos de las publicaciones científicas, datos de investigación, códigos y metodologías.