Defects introduced during the growth process greatly affect the device performance of two-dimensional (2D) materials. Here we demonstrate the applicability of employing machine-learning-based analysis to distinguish the monolayer continuous film and defect areas of molybdenum disulfide (MoS2) using position-dependent information extracted from its Raman spectra. The random forest method can analyze multiple Raman features to identify samples, making up for the problem of not being able to effectively identify by using just one certain variable with high recognition accuracy. Even some dispersed nucleation site defects can be predicted, which would commonly be ignored under an optical microscope because of the lower optical contrast. The successful application for classification and analysis highlights the potential for implementing machine learning to tap the depth of classical methods in 2D materials research.
Achieving optically controlled nanomachine engineering can satisfy the touch-free and non-invasive demands of optoelectronics, nanotechnology, and biology. Traditional optical manipulations are mainly based on optical and photophoresis forces, and they usually drive particles in gas or liquid environments. However, the development of an optical drive in a non-fluidic environment, such as on a strong van der Waals interface, remains difficult. Herein, we describe an efficient 2D nanosheet actuator directed by an orthogonal femtosecond laser, where 2D VSe2 and TiSe2 nanosheets deposited on sapphire substrates can overcome the interface van der Waals forces (tens and hundreds of megapascals of surface density) and move on the horizontal surfaces. We attribute the observed optical actuation to the momentum generated by the laser-induced asymmetric thermal stress and surface acoustic waves inside the nanosheets. 2D semimetals with high absorption coefficient can enrich the family of materials suitable to implement optically controlled nanomachines on flat surfaces.
We investigated a metasurface broadband absorber composed entirely of iron and featuring a simple bilayer structure: a metallic iron substrate topped with an iron nanodisk-patterned layer. This absorber structure achieved over 90% absorption across the visible spectrum, with an average absorption of 97%. The designed metasurface structure had an aspect ratio of less than 1, which facilitated high-quality sample fabrication. In contrast to precious or rare metals typically utilized in visible broadband metasurface absorbers, this absorber offers a significant cost advantage. Furthermore, it exhibits polarization insensitivity and maintains a stable performance under oblique incidence over a wide angular range, making it suitable for practical applications. Additionally, the high melting point and favorable thermal conductivity of iron satisfy the requirements for solar harvesting and photothermal conversion devices. Therefore, this paper presents a highly efficient, low-cost, easy-to-fabricate, and operationally stable solution that is amenable to large-scale deployment in solar energy-harvesting devices.
This study proposes an ultrabroadband absorber composed of nanocolumns across the ultraviolet-near-infrared spectrum. Calculations indicate that the absorber maintains a consistent absorptivity exceeding 90% throughout the 350–1950nm band, with an average absorptivity of 96%. Leveraging the distinctive response of unit cells of varying sizes to different wavelengths, multiple unit cells are combined into a supercell and adjacent absorption peaks are consolidated to achieve broadband absorption. Particle swarm optimization is employed for a reverse design, which facilitates the determination of the optimal parameters for the unit cells. The results suggest the feasibility of designing absorbers featuring high efficiency, polarization insensitiveness, and wide angles. This study presents a promising method featuring high flexibility and low computational consumption for absorber design.
We investigate the terahertz (THz) nonlinear absorption characteristics in a thin Al2O3 crystal using nonlinear THz spectroscopy. A THz saturable absorption performance with a high modulation depth (27.5%) and a relatively low saturable intensity (6.99 µJ/cm2) of Al2O3 is revealed, covering the THz spectrum from 0.1 to 8 THz. The inevitable presence of oxygen vacancies and impurities in Al2O3 single crystal results in the existence of free electrons within the conduction band. The transmission enhancement can be described by the change of the mobility of electrons due to intervalley scattering induced by THz pulses, based on first-principles calculations. Therefore, Al2O3 crystals have promising application potential in mode-locked devices for directly delivering broadband ultrashort THz pulses.