Quantum dot enhancement film (QDEF) working in tandem with a blue light-emitting-diode (LED) back-light-unit (BLU) has been recently used in liquid crystal display (LCD) to minimize the cross talks between the polarized emitting B-, G-, and R-light. However, they still exhibit a fundamental and considerable emitting-light-power loss from QDEF because of the light absorption loss in resin and transparent films of QDEF. In this work, we propose and demonstrate the superiority of the LCD using blue-(B-), green-(G-), and red-(R-) perovskite-quantum-dot (PrQD) functional CFs coupled with a blue LED BLU. This LCD using PrQD functional CFs and a blue LED BLU features cross-talk free spectra of polarized emitting B-, G-, and R-light, maximizing the LCD color gamut and exhibiting a world record performance of over 102.7% (137%) of Rec.2020 standard (NTSC standard). Theoretically, such an improvement in color gamut would facilitate unlimited scaling-down of the pixel leading to super ultra-high resolution LCD.
A tunneling magneto-resistance (TMR) ratio of ∼163% at an annealing temperature of 400 °C was achieved in a single MgO-based perpendicular-magnetic-tunneling-junction (p-MTJ) spin valve with a tungsten (W)/tantalum (Ta) seed and W capping layer instead of with a Ta seed and capping layer. This was done by improving the interface perpendicular magnetic anisotropy (i-PMA) characteristic of the Co2Fe6B2 free layer and face-centered-cubic (f.c.c.) crystallinity of the MgO tunneling barrier. In particular, a TMR ratio of ∼141% at an annealing temperature of 400 °C and a thermal stability at room temperature of ∼61 were achieved in a double MgO-based p-MTJ spin valve with W/Ta seed, W spacer, and W capping layers by doubling the i-PMA magnetic moment and increasing slightly magnetic anisotropy field (Hk).
1 January 2012 in Journal of the Electrochemical Society
Ruthenium (Ru) chemical mechanical planarization (CMP) with a slurry using sodium periodate (NaIO4) as an oxidizer was carried out as a function of pH. The Ru polishing rate was highest at pH 7 and decreased as the pH decreased or increased. In addition, a similar trend in the corrosion current density as a function of pH was found. Two equivalent circuit models were proposed to explain the electrochemical impedance spectroscopy (EIS) results of Ru in NaIO4 solution as a function of pH. From results of EIS, we found that the Ru film had a lowest charge transfer resistance in a neutral region than that in an acidic or alkaline region. This different charge transfer resistance of the Ru film as a function of pH resulted from the different surface composition of Ru oxide species, which was analyzed with X-ray photoelectron spectroscopy. Finally, we briefly derived a series of reaction equations between Ru and NaIO4 on the basis of the above results and discussion.
Silicon solar cells mainly absorb visible light, although the sun emits ultraviolet (UV), visible, and infrared light. Because the surface reflectance of a textured surface with SiNX film on a silicon solar cell in the UV wavelength region (250–450 nm) is higher than ∼27%, silicon solar-cells cannot effectively convert UV light into photo-voltaic power. We implemented the concept of energy-down-shift using CdSe/ZnS core/shell quantum-dots (QDs) on p-type silicon solar-cells to absorb more UV light. CdSe/ZnS core/shell QDs demonstrated clear evidence of energy-down-shift, which absorbed UV light and emitted green-light photoluminescence signals at a wavelength of 542 nm. The implementation of 0.2 wt% (8.8 nm QDs layer) green-light emitting CdSe/ZnS core/shell QDs reduced the surface reflectance of the textured surface with SiNX film on a silicon solar-cell from 27% to 15% and enhanced the external quantum efficiency (EQE) of silicon solar-cells to around 30% in the UV wavelength region, thereby enhancing the power conversion efficiency (PCE) for p-type silicon solar-cells by 5.5%.