Adella Myori Hardieka

Ms. Adella Myori Hardieka


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 August 2025 in Molecules
Verified
Journal Article
Open access
AHAdella Myori Hardieka
Adella Myori Hardieka
TBTürkan Börklü Budak
Türkan Börklü Budak
Many industries release untreated synthetic dye effluents into water bodies, harming ecosystems and human health. Therefore, an economical and sustainable solution for treating dye-contaminated water must be developed. In this study, mulberry leaves (Morus nigra L.), as a cost-effective and sustainable adsorbent, were prepared to remove Basic Yellow 28 (BY28) and Basic Blue 3 (BB3) cationic dyes from industrial dye wastewater using adsorption. Batch experiments with key variables such as initial dye concentration, adsorbent dosage, contact time, temperature, stirring speed, and pH were conducted to find optimal conditions. The effectiveness of mulberry leaves as an adsorbent after multiple regeneration cycles was examined. The adsorbent was characterized through various instrumental methods, including FTIR, SEM, XRD, and BET analysis. Adsorption performance was analyzed using the Langmuir and Freundlich isotherm models. The results showed that the mulberry leaf adsorbent best fits the Langmuir model, with R2 values of 0.999 for BY28 and 0.973 for BB3. The maximum adsorption capacities were 0.15 mg/g for BY28 and 7.19 mg/g for BB3, indicating their upper limits for dye uptake. The optimal conditions achieving removal efficiencies of over 99% were 1.5 g, 50 mL, 15 min, 180 rpm, and 10 mg/L at 30 °C for BY28 in neutral pH (7) and 1.5 g, 50 mL, 45 min, 100 rpm, and 30 mg/L at 40 °C for BB3 in basic pH (10). The regeneration of mulberry leaves as an adsorbent through acid treatment with 0.1 M HCl and 0.1 M CH3COOH solutions maintained a high performance, achieving up to 98% dye removal efficiency after two regeneration cycles. It has been observed that successful results can be achieved in terms of reusability. Additionally, the removals of BB3 and BY28 performed in an ultrasonic-bath-assisted environment successfully achieved removal efficiencies of 84.87% and 75.41%, respectively. According to the results, mulberry leaves can effectively be used in wastewater treatment to remove dyes, can be reused multiple times, and thus serve as an environmentally friendly and sustainable adsorbent.

31 January 2026 in Asian Journal of Chemistry
Verified
Journal Article
Open access
AHAdella Myori Hardieka
Adella Myori Hardieka
TBTürkan Börklü Budak
Türkan Börklü Budak
Driven by the need for sustainable and economical water treatment solutions, this study explores the use of agricultural byproduct adsorbents, specifically hemp seed oil cake (HSOC), for the removal of reactive black 5 (RB5) dye. Batch experiments identified the ideal conditions for the adsorption process, resulting in a maximum removal efficiency of 99.94%. The process, identified as spontaneous and exothermic through thermodynamic analysis, was most effective under the following conditions: an initial RB5 dye concentration of 10 mg/L, 1.5 g of HSOC adsorbent, a pH of 4 (acidic condition), 45 min of contact time, 100 rpm agitation and a temperature of 50 ºC. These results collectively affirm HSOC’s promise as a highly efficient, bio-based material for the remediation of dye-contaminated water.