For the first time, the present work investigates natural convection heat transfer in a two-dimensional inclined quarter-oval cavity filled with a non-Newtonian power-law fluid with heat generation/absorption in the presence of a magnetic field using the Lattice Boltzmann Method (LBM). Part of the vertical wall of the cavity is maintained at a constant hot temperature while the curved wall is kept at a constant cold temperature. All other walls are maintained adiabatic. The effect of physical parameters such as the Hartmann number, non-Newtonian power-law fluid index, heat generation/absorption coefficient and the inclination angle of the cavity on the nature of flow and heat transfer is studied and analyzed. The present work is validated with previous studies and the results are in very good agreement. The obtained results show that increasing the power-law fluid index on the average reduces the maximum value of the streamlines by 88% and the average Nusselt number by 45%. Also, increasing the Hartmann number reduces the heat transfer from the wall to the fluid. In the case of heat absorption and heat generation, the average Nusselt number is about 30% higher and 55% lower than in the case where there is no heat absorption/production, respectively. In addition, heat generation on the average increases the fluid flow power by 15%, which is negligible for the shear thickening fluid case. By increasing the heat generation/absorption coefficient and decreasing the non-Newtonian power-law fluid index, the effect of the magnetic field increases. The lowest amount of heat transfer is observed at a 90 degrees inclination angle of the cavity for which the average Nusselt number is up to about 10% less in this case. In the absence of a magnetic field and at a 180 degrees inclination angle, the maximum amount of heat transfer from the wall to the fluid is observed for a non-Newtonian shear thinning fluid and for heat absorption. This study could pave the way for the optimal design of industrial thermal equipment.
8 September 2013 in Mechanics of Composite Materials
Installation of electronic components in a confined space makes the issue of heat transfer and cooling inside shaped chambers of great importance. Investigation of the entropy generated in the equipment is considered as an important approach in the optimal design of devices in which heat transfer occurs. The innovation of the present work is the modeling of non-uniform magnetic field with heat absorption/production in the determination of the amount of entropy produced arising from conjugate heat transfer of power-law liquid inside the K-shaped cavity that has not been studied. The main variables of this study are Rayleigh number (103 and 105), Hartmann number (0, 15, 30 and 45), heat absorption/production (−7, 0 and +7), thermal conductivity ratio (1, 10 and 50), cavity aspect ratio (0.2, 0.4 and 0.6), type of magnetic field and kind of fluid (Pseudoplastic, Newtonian and Dilatant fluids). The obtained outcomes revealed that: The power of the current and the amount of heat transfer can be controlled by applying magnetic field. Less reduction of the mean Nusselt number and current strength is achieved by applying magnetic field non-uniformly. Enhancement of the heat absorption/production coefficient leads to a decrement of the mean Nusselt number, which this impact increases with augmenting Hartmann number. Enhancement of the cavity aspect ratio reduces the influence of magnetic field, flow strength, mean Nusselt number and entropy produced, which this effect is negligible for dilatant fluid. Heat transfer is a function of the ratio of thermal conductivity and Rayleigh number so that as these two values increase, the influence of enhancement of the Hartmann number is more pronounced. The influence of increment of the Hartmann number on the entropy production: increasing up to 30% in heat production mode and decreasing up to 10% in heat absorption mode. Entropy production increases with increasing Rayleigh number and heat absorption/production coefficient. The influence of magnetic field on entropy production for pseudoplastic fluid is most significant. Generally, the influence of variations thermal conductivity ratio and Hartmann number on the dilatant fluid is insignificant.
8 November 2022 in International Journal of Energy and Environmental Engineering