The Ordovician carbonate formations in the Ordos Basin provide a crucial stratigraphic unit for prospective oil and gas exploration. Significant progress has been made in the exploration of natural gas within the Ordovician subsalt formations. Nonetheless, understanding its accumulating properties requires additional investigation. Clarifying the formation periods of the carbonate rock reservoirs in the Majiagou Formation of the basin can furnish a theoretical foundation for advanced exploration of carbonate rock oil and gas. This study uses fluid inclusion petrography, laser Raman spectroscopy, and microscopic temperature measurement methods, along with information about the basin’s history of burial and thermal evolution, to look at the oil and gas charging periods of Majiagou Formation reservoir in the central-eastern basin. The results show that there are two stages of hydrocarbon inclusions. The first stage has blue fluorescence and temperature peaks between 85 and 95 °C in the central basin and between 105 and 115 °C in the eastern basin. For the second stage, no fluorescence can be observed. Meanwhile, the temperature peaks are between 175 and 185 °C in the central basin, and between 165 and 175 °C in the eastern basin. In the central part of the basin, oil charging began in the Late Triassic (231–203 Ma) and reached the gas generation stage in the Late Early Cretaceous (121–112 Ma), peaking in natural gas charging. In contrast, the reservoirs in the eastern part of the basin experienced a primary oil charging stage in the Early Jurassic (196–164 Ma) and entered the gas generation stage in the Late Early Cretaceous (110–101 Ma). The hydrocarbon charging process in the study area is mainly controlled by the thermal evolution history of the basin. The study determines that the central basin enters the threshold of hydrocarbon generation earlier than the eastern basin, leading to earlier oil and gas charging.

This study investigates the uplift and exhumation history of the southern segment of the western margin of the Ordos Basin using low-temperature thermochronology, including zircon (U-Th)/He (ZHe), apatite fission-track (AFT), and apatite (U-Th)/He (AHe) data, combined with thermal history modeling. The study area exhibits a complex structural framework shaped by multiple deformation events, leading to the formation of extensively developed fault systems. Such faulting can adversely affect hydrocarbon preservation. To better constrain the timing of fault reactivation in this area, we carried out an integrated study involving low-temperature thermochronology and burial history modeling. The results reveal a complex, multi-phase thermal-tectonic evolution since the Late Paleozoic. The ZHe ages (291–410 Ma) indicate deep burial and heating related to Late Devonian–Early Permian tectonism and basin sedimentation, reflecting early orogenic activity along the western North China Craton. During the Late Jurassic to Early Cretaceous (165–120 Ma), the study area experienced widespread and differential uplift and cooling, controlled by the Yanshanian Orogeny. Samples on the western side of the fault show earlier and more rapid cooling than those on the eastern side, suggesting a fault-controlled, basinward-propagating exhumation pattern. The cooling period indicated by AHe data and thermal models reflects the Cenozoic uplift, likely induced by far-field compression from the rising northeastern Tibetan Plateau. These findings emphasize the critical role of inherited faults not only as thermal-tectonic boundaries during the Mesozoic but also as a pathway for hydrocarbon migration. Meanwhile, thermal history models based on borehole data further reveal that the study area underwent prolonged burial and heating during the Mesozoic, reaching peak temperatures for hydrocarbon generation in the Late Jurassic. The timing of major cooling events corresponds to the main stages of hydrocarbon expulsion and migration. In particular, the differential uplift since the Mesozoic created structural traps and migration pathways that likely facilitated hydrocarbon accumulation along the western fault zones. The spatial and temporal differences among the samples underscore the structural segmentation and dynamic response of the continental interior to both regional and far-field tectonic forces, while also providing crucial constraints on the petroleum system evolution in this tectonically complex region.

This study analyzes the lacustrine hydrocarbon source rocks of the Lower Cretaceous in the Erdengsumu sag of the Erlian Basin, evaluating their characteristics and identifying areas with oil resource potential, while also investigating the ancient lake environment, material source input, and controlling factors, ultimately developing a sedimentary model for lacustrine hydrocarbon source rocks. The findings suggest the following: (1) The lower Tengger Member (K₁bt₁) and the Aershan Formation (K₁ba) are the primary oil-producing strata, with an effective hydrocarbon source rock exhibiting a lower limit of total organic carbon (TOC) at 0.95%. The Ro value typically remains below 0.8%, indicating that high-maturity oil production has not yet been attained. (2) The oil generation threshold depths for the Dalestai and Sayinhutuge sub-sags are 1500 m and 1214 m, respectively. The thickness of the effective hydrocarbon source rock surpasses 200 m, covering areas of 42.48 km² and 88.71 km², respectively. The cumulative hydrocarbon generation intensity of wells Y1 and Y2 is 486 × 10⁴ t/km² and 26 × 10⁴ t/km², respectively, suggesting that the Dalestai sub-sag possesses considerable petroleum potential. The Aershan Formation in the Chagantala sub-sag has a maximum burial depth of merely 1800 m, insufficient to attain the oil generation threshold depth. (3) The research area’s productive hydrocarbon source rocks consist of organic matter types I and II₁. The Pr/Ph range is extensive (0.33–2.07), signifying a reducing to slightly oxidizing sedimentary environment. This aligns with the attributes of small fault lake basins, characterized by shallow water and robust hydrodynamics. (4) The low ratio of ∑nC₂₁₋/∑nC₂₂₊ (0.36–0.81), high CPI values (>1.49), and high C₂₉ sterane concentration suggest a substantial terrestrial contribution, with negligible input from aquatic algae–bacterial organic matter. Moreover, as sedimentation duration extends, the contribution from higher plants progressively increases. (5) The ratio of the width of the deep depression zone to the width of the depression in the Erdengsumu sag is less than 0.25. The boundary fault scale is small, its activity is low, and there is not much input from the ground. Most of the source rocks are in the reducing sedimentary environment of the near-lying gently sloping zone.

The characterization of geothermal reservoirs and their genetic mechanisms is critical for understanding geothermal system evolution and evaluating geothermal resource potential. The eastern Gushi Sag of the Weihe Basin hosts three Neogene sandstone geothermal reservoirs, including the Gaoling Group, Lantian–Bahe Formation, and Zhangjiapo Formation; however, their reservoir characteristics and genetic mechanisms remain poorly constrained. This study integrates geological structures, geothermal well logging, core petrophysical properties, and hydrochemical data to characterize reservoir conditions and establish a genetic model. The results show that the Neogene reservoirs are mainly composed of feldspathic sandstone, with the Lantian–Bahe Formation identified as the primary geothermal reservoir due to its moderate porosity, low permeability, large sandstone thickness, and favorable continuity. The geothermal field exhibits an average geothermal gradient of 3.35 °C/100 m with a south-to-north decreasing trend. Hydrochemical evidence suggests that geothermal fluids originate mainly from meteoric water recharged from the northern Qinling Orogenic Belt and paleo-sedimentary water, with deep faults and pore networks controlling fluid migration and accumulation. The Quaternary strata and Zhangjiapo Formation provide effective sealing conditions. This study reveals the coupled controls of thermal conditions, reservoir architecture, fluid circulation, and preservation on sandstone geothermal systems, providing insights into geothermal resource assessment, exploration strategy optimization, and the formation mechanisms of similar sedimentary basin geothermal systems.

Exploration of the Gaolihan (GLH) Sag in the Erlian Basin remains low due to the discontinuity of early-stage 2D seismic surveys that have failed to provide regional coverage, leaving the deep geological framework unclear and hindering hydrocarbon breakthroughs. To address this problem and to evaluate the resource potential of the pre-Cretaceous formation, this study applied an integrated geophysical workflow combining 1:50,000 high-precision gravity–magnetic surveys, gravity–magnetic well–seismic joining in the forward and inversion directions, layer stripping, and time–frequency electromagnetic method (TFEM) profiling. Using logging resistivity curves from wells GC1 and LT1 for electrical calibration, we delineated the fault system, stratigraphic framework, and deep lithology of the GLH Sag. The key results include the following: (1) identification of 12 faults defining a “three sags and three uplifts” structural pattern; (2) burial depths of the Cretaceous, Jurassic, and Carboniferous–Permian basements ranging from 3000 to 3300 m, 4400 to 4600 m, and 6500 to 6700 m, respectively; and (3) recognition of three electrical layers within the Jurassic, with high-resistivity intervals indicating basalt and low-resistivity intervals interpreted as coal-bearing formation of the Lower Jurassic Hongqi formation. Quantitative validation against wells GC1 and LT1 demonstrates that the TFEM-inverted resistivity values show an average absolute deviation of ~2.5 Ω·m from measured logs (relative error 5 Ω·m), with an overall stratigraphic boundary consistency exceeding 85%. Lithologic prediction accuracies reach 88% for sandstone/siltstone and 82% for mudstone/carbonaceous mudstone. This integrated workflow proves effective for deep structural imaging and lithology prediction in volcanic-covered, seismically poor areas, and provides a practical reference for similar low-exploration basins.

The Fujin Basin (FJ Basin) is a Cenozoic sedimentary basin located in the northern Junggar Basin. In response to key scientific issues, including unclear stratigraphic distribution and an inadequately constrained structural framework, this study utilizes measured resistivity data acquired through the controlled-source sounding method. By integrating profile interpretation and numerical simulation, the geological structure and stratigraphic distribution of the basin are investigated, and the exploration potential for deep oil and gas resources as well as shallow sandstone-hosted uranium deposits is evaluated. Using known logging resistivity curves, electromagnetic frequency responses at different burial depths were simulated to verify the effectiveness of the acquisition parameters and survey design for detecting strata ranging from shallow Tertiary formations to deep Carboniferous sequences. Based on the processed data, combined with the known physical properties of the strata and comprehensive geological interpretation, the geological structure, stratigraphic distribution, and tectonic framework of the FJ Basin were clarified. Integrated with borehole geochemical data, the CSEM resistivity sections suggest that the Upper Carboniferous Haerjiawu Formation constitutes a potential hydrocarbon source rock within the JTL sag, warranting further drilling verification. In addition, resistivity attributes and dual-frequency phase attributes were employed to predict the metallogenic conditions and favorable targets for shallow Tertiary sandstone-hosted uranium mineralization. The prediction results show strong consistency with known uranium deposits, providing important guidance for uranium exploration. The methodology proposed in this study can serve as a technical reference for integrated multi-mineral exploration in similar regions.