Non-orthogonal multiple access (NOMA) is considered a potential technique in fifth-generation (5G). Nevertheless, it is relatively complex when applying NOMA to a massive access scenario. Thus, in this paper, a hybrid NOMA/OMA scheme is considered for uplink wireless transmission systems where multiple cognitive users (CUs) can simultaneously transmit their data to a cognitive base station (CBS). We adopt a user-pairing algorithm in which the CUs are grouped into multiple pairs, and each group is assigned to an orthogonal sub-channel such that each user in a pair applies NOMA to transmit data to the CBS without causing interference with other groups. Subsequently, the signal transmitted by the CUs of each NOMA group can be independently retrieved by using successive interference cancellation (SIC). The CUs are assumed to harvest solar energy to maintain operations. Moreover, joint power and bandwidth allocation is taken into account at the CBS to optimize energy and spectrum efficiency in order to obtain the maximum long-term data rate for the system. To this end, we propose a deep actor-critic reinforcement learning (DACRL) algorithm to respectively model the policy function and value function for the actor and critic of the agent (i.e., the CBS), in which the actor can learn about system dynamics by interacting with the environment. Meanwhile, the critic can evaluate the action taken such that the CBS can optimally assign power and bandwidth to the CUs when the training phase finishes. Numerical results validate the superior performance of the proposed scheme, compared with other conventional schemes.

The full-duplex transmission protocol has been widely investigated in the literature in order to improve radio spectrum usage efficiency. Unfortunately, due to the effect of imperfect self-interference suppression, the change in transmission power and path loss of non-line-of-sight fading channels will strongly affect performance of full-duplex transmission mode. This entails that the full-duplex transmission protocol is not always a better selection compared to the traditional half-duplex transmission protocol. Considering solar energy-harvesting-powered cognitive radio networks (CRNs), we investigate a joint full-duplex/half-duplex transmission switching scheduling and transmission power allocation in which we utilize the advantages of both half-duplex and full-duplex transmission modes for maximizing the long-term throughput of cognitive radio networks. First, we formulate the transmission rate of half-duplex and full-duplex links for fading channels between cognitive user and base station in which the channel gain is assumed to follow an exponential distribution. Afterward, by considering the availability probability of the primary channel, the limitation of the energy-harvesting capacity of the cognitive user, and the transmission capacity of half-duplex and full-duplex links, we describe the problem in terms of long-term expected throughput. The problem is then solved by adopting the partially observable Markov decision process framework to find the optimal transmission policy for the transmission pair between cognitive user and base station in order to maximize the long-term expected throughput. The optimal policy consists of either the half-duplex or the full-duplex transmission protocols as well as the corresponding amount of transmission energy in each time slot. In addition, to reduce the complexity in formulation and calculation, we also apply the actor–critic-based learning method to solve the considered problem. Finally, the performance of the proposed scheme was evaluated by comparing it with a conventional scheme in which the context of energy harvesting and long-term throughput is not considered.

This paper considers cognitive radio networks (CRNs) utilizing multiple time-slotted primary channels in which cognitive users (CUs) are powered by energy harvesters. The CUs are under the consideration that hardware constraints on radio devices only allow them to sense and transmit on one channel at a time. For a scenario where the arrival of harvested energy packets and the battery capacity are finite, we propose a scheme to optimize (i) the channel-sensing schedule (consisting of finding the optimal action (silent or active) and sensing order of channels) and (ii) the optimal transmission energy set corresponding to the channels in the sensing order for the operation of the CU in order to maximize the expected throughput of the CRN over multiple time slots. Frequency-switching delay, energy-switching cost, correlation in spectrum occupancy across time and frequency and errors in spectrum sensing are also considered in this work. The performance of the proposed scheme is evaluated via simulation. The simulation results show that the throughput of the proposed scheme is greatly improved, in comparison to related schemes in the literature. The collision ratio on the primary channels is also investigated.

The performance of data aggregation in industrial wireless communications can be degraded by environmental interference on Industrial Scientific Medical (ISM) channels. In this paper, cognitive radio (CR) was applied to enable devices to share primary channels with the aim of enhancing the transmission performance of the WirelessHART network. We considered a linear convergecast system, where the packets generated at each device were routed to the gateway (GW) through the aid of neighboring devices. The solar-powered cognitive access points (CAPs) were deployed to improve the network performance by opportunistically allocating the primary channels to the devices for data transmissions. Firstly, we formulate the scheduling problem of long-term throughput maximization as a framework of a Markov decision process with the constraints of the minimum delay, the number of required ISM channels, and the harvested energy at the CAPs. Then, we propose a deep reinforcement learning-based scheduling scheme to optimally assign multiple ISM and primary channels to the field devices in each superframe. The simulation results confirmed the superiority of the proposed scheme compared to existing methods.

In this paper, we present the design of a low-cost remote monitoring and control network for household cultivation, in which peripherals connected to each sensor-node can be re-configured remotely from the internet via a master node without any changing on the system firmware. The feasibility of the proposed scheme is evaluated via experiments. Particularly, the experiments set-up consists of one master node communicating wirelessly with some sensor nodes (slaves) to collect sensing data or send commands to them to manage the operating of the system. The sensing data from slaves will be collected and updated periodically to Google Sheets by master node via the internet connection. Additionally, slaves are equipped with versatile ports for connecting with sensors. The port is designed to be compatible with most popular communication standards such as analog, digital, I2C, UART, SPI. The key design of these communication ports is that when plugging/unplugging a sensor into/from a port, the corresponding slave can be re-configured directly on Google Sheets or keypad connected to master node. The research results can be further extended and improved to be applicable to household cultivation as well as application models of smart agriculture.