A Twist on the Capacity Crunch: The rate at which data can be transmitted down optic fibers is approaching a limit because of nonlinear optical effects. Multiplexing allows data to be encoded in different modes of light such as polarization, wavelength, amplitude, and phase and to be sent down the fibers in parallel. Optical angular momentum (OAM) can provide another degree of freedom whereby the photons are given a well-defined twist or helicity. Bozinovic et al. (p. 1545 ) were able to transmit high-bandwidth data using OAM modes in long lengths of optical fibers, thus providing a possible route to get yet more capacity through optic fiber networks.

Orbital angular momentum (OAM), which describes the “phase twist” (helical phase pattern) of light beams, has recently gained interest due to its potential applications in many diverse areas. Particularly promising is the use of OAM for optical communications since: (i) coaxially propagating OAM beams with different azimuthal OAM states are mutually orthogonal, (ii) inter-beam crosstalk can be minimized, and (iii) the beams can be efficiently multiplexed and demultiplexed. As a result, multiple OAM states could be used as different carriers for multiplexing and transmitting multiple data streams, thereby potentially increasing the system capacity. In this paper, we review recent progress in OAM beam generation/detection, multiplexing/demultiplexing, and its potential applications in different scenarios including free-space optical communications, fiber-optic communications, and RF communications. Technical challenges and perspectives of OAM beams are also discussed.

One property of electromagnetic waves that has been recently explored is the ability to multiplex multiple beams, such that each beam has a unique helical phase front. The amount of phase front ‘twisting’ indicates the orbital angular momentum state number, and beams with different orbital angular momentum are orthogonal. Such orbital angular momentum based multiplexing can potentially increase the system capacity and spectral efficiency of millimetre-wave wireless communication links with a single aperture pair by transmitting multiple coaxial data streams. Here we demonstrate a 32-Gbit s⁻¹ millimetre-wave link over 2.5 metres with a spectral efficiency of ~16 bit s⁻¹ Hz⁻¹ using four independent orbital–angular momentum beams on each of two polarizations. All eight orbital angular momentum channels are recovered with bit-error rates below 3.8 × 10⁻³. In addition, we demonstrate a millimetre-wave orbital angular momentum mode demultiplexer to demultiplex four orbital angular momentum channels with crosstalk less than −12.5 dB and show an 8-Gbit s⁻¹ link containing two orbital angular momentum beams on each of two polarizations.

Structured light, especially beams carrying orbital angular momentum (OAM), has gained much interest due to its unique amplitude and phase structures. In terms of communication systems, multiple orthogonal OAM beams can be potentially utilized for increasing link capacity in different scenarios. This review describes challenges, advances, and perspectives on different aspects of the OAM-based optical communications, including (a) OAM generation/detection and (de)multiplexing, (b) classical free-space optical communication links, (c) fiber-based communication links, (d) quantum communication links, (e) OAM-based communications in different frequency ranges, (f) OAM-based communications using integrated devices, and (g) novel structured beams for communications.

As a recently explored property of light, orbital angular momentum (OAM) has potential in enabling multiplexing of multiple data-carrying beams, to increase the transmission capacity and spectral efficiency of a communication system. For the use of OAM multiplexing in free-space optical (FSO) communications, atmospheric turbulence presents a critical challenge. In this paper, we experimentally demonstrate simultaneous pre- and post-turbulence compensation of multiple OAM beams, in a bidirectional free-space optical communications link, using a single adaptive optics (AO) system. Each beam carries a 100 Gbit/s signal, and propagates through an emulated atmospheric turbulence. A specifically designed AO system, which utilizes a Gaussian beam for wavefront sensing and correction, is built at one end of the bidirectional link. We show that this AO system can be used to not only post-compensate the received OAM beams, but also pre-compensate the outgoing OAM beams emitted from the same link end. Experimental results show that this compensation technique helps reduce the crosstalk onto adjacent modes by more than 12 dB, achieving bit error rates below the forward error correction limit of $1\times {10}^{-3}$, for both directions of the link. The results of work might be helpful to future implementation of OAM multiplexing, in a high-capacity FSO bidirectional link affected by atmospheric turbulence.

Mode division multiplexing (MDM)– using a multimode optical fiber’s N spatial modes as data channels to transmit N independent data streams – has received interest as it can potentially increase optical fiber data transmission capacity N-times with respect to single mode optical fibers. Two challenges of MDM are (1) designing mode (de)multiplexers with high mode selectivity (2) designing mode (de)multiplexers without cascaded beam splitting’s 1/N insertion loss. One spatial mode basis that has received interest is that of orbital angular momentum (OAM) modes. In this paper, using a device referred to as an OAM mode sorter, we show that OAM modes can be (de)multiplexed over a multimode optical fiber with higher than −15 dB mode selectivity and without cascaded beam splitting’s 1/N insertion loss. As a proof of concept, the OAM modes of the LP₁₁ mode group (OAM_−1,0"Equation missing"<!-- image only, no MathML or LaTex --> and OAM_+1,0), each carrying 20-Gbit/s polarization division multiplexed and quadrature phase shift keyed data streams, are transmitted 5km over a graded-index, few-mode optical fibre. Channel crosstalk is mitigated using 4 × 4 multiple-input-multiple-output digital-signal-processing with <1.5 dB power penalties at a bit-error-rate of 2 × 10⁻³.