Hydrogen energy is considered a crucial clean energy carrier for replacing fossil fuels in the future. Liquid hydrogen (LH2), with its economic advantages and high purity, is central to the development of future hydrogen refueling stations (HRSs). However, leakage poses significant fire and explosion risks, challenging its safe industrial use. In this study, a numerical model of LH2 leakage at an HRS in Chongqing was established using Computational Fluid Dynamics (CFD) software. The diffusion law of a flammable gas cloud (FGC) was examined under the synergistic effect of the leakage direction, rate, and wind speed of an LH2 storage tank in an HRS. The phase transition of LH2 presents dual risks of combustion and frostbite owing to the spatial overlap between low-temperature areas and FGCs. The findings revealed that the equivalent stoichiometric gas cloud volume (Q9) reached 685 m3 in the case of crosswind leakage, with the superimposed effect of reflected waves from the LH2 transport vehicle resulting in a peak explosion overpressure of 0.61 bar. The low-temperature hazard area and the FGC (with a concentration of 30–75%) show significant spatial overlap. These research outcomes offer crucial theoretical underpinning for enhancing equipment layout optimization and safety protection strategies at HRSs.
14 May 2026 in International Journal of Hydrogen Energy
The widespread application of hydrogen in transportation and energy storage has attracted more concern regarding safety risks associated with leakage in high-pressure hydrogen storage systems. Conventional leakage models based on isentropic process assumptions neglected loss mechanisms generally, resulting in significant prediction errors. To overcome this limitation, a leakage model for high-pressure hydrogen tank was developed considering comprehensively real gas effects along with local losses, frictional losses, and heat transfer (LFH model). The model aims to investigate the dynamic leakage characteristics of high-pressure hydrogen storage systems. Based on real gas equation of state, the model employs the critical pressure in leakage outlet as the threshold for distinguishing between supercritical and subcritical flow regimes. Transient behaviors of leakage process parameters are obtained by solving differential equations derived from the mass and energy conservation principle. The results demonstrate that LFH model considering gas leakage process losses can provide more reliable prediction for key leakage process parameters, including mass flow rate, pressure, velocity and temperature, by accounting for process losses. This study also can offer more accurate performance for the unsteady jet characteristics of high-pressure hydrogen leakage, thereby contributing to research on hydrogen diffusion behaviors and early-warning design of storage systems.