Novel designs of paper-based bandstop frequency-selective surfaces (FSSs) are presented in this article. The characteristics of the paper-based honeycomb structure are investigated first. One folded dipole resonator with first-order bandstop response is analyzed and further printed on the sidewalls of the honeycomb structure accordingly. A second-order response with two cascade FSSs is proposed with controllable bandwidth by the coupling coefficient of the resonators with the aid of the equivalent circuit model. Two paper-based FSS samples were fabricated and measured to demonstrate the validity of the proposed design strategies. Benefiting from the merits of lightweight and strong mechanical properties, the proposed paper-based FSS is a potential candidate for application in radar systems and aircraft.
14 April 2021 in IEEE Transactions on Electromagnetic Compatibility
Phase switched screen (PSS) has been proposed for more than two decades for its applications on radar cloaking. However, the PSSs in most publications need a thickness of one-quarter wavelength to realize perfect cloaking at the operating frequency of the incident radar-detecting wave, which seems too thick for engineering. In this article, a new design of the dual-band artificial magnetic conductor (AMC) is proposed in which the electromagnetic band gaps are shifted among two bands by adjusting the biasing current on the four p-i-n diodes. By controlling the states of the diodes between on and off , the in-phase reflection frequency of the AMC can switch from 2.5 to 5.3 GHz. Based on the AMC structure above, a potential dual-band PSS is realized through different switching schemes and, therefore, achieves good stealth effects during the two bands above.
19 April 2022 in Microwave and Optical Technology Letters
In this paper, a novel and simple dual‐polarized frequency‐selective rasorber (FSR) which has a wide absorption band including a wide transmission band was presented. Detailed equivalent circuit was derived to accurately predict the frequency responses of the structure. Based on reasonable equivalent analysis of a traditional metal grid structure, a modified structure with improved performance was proposed. The structure consists of a lossy frequency‐selective surface (FSS) constructed with metal rings connected by center loaded strips as the top layer, and a broadband transmission FSS at the bottom, while the two layers are separated by air. To validate our proposal, a prototype was fabricated and measured. The measured results are in good agreements with simulations under normal incidence, which indicates a broad absorption bandwidth of 80% that from 3.40 to 8.16 GHz; in the meantime, a wide transmission band with an insertion loss of less than −1.25 dB is ranging from 9.03 to 12.01 GHz. It should be pointed out that, the reflection from the whole structure in the operation band can be kept below −10 dB from 4.15 to 11.87 GHz.
24 January 2024 in Microwave and Optical Technology Letters