Polymeric wastes have caused increasing environmental problems, mainly in oceans that accumulate large amounts of non-degradable plastic waste. Particularly, waste of polymeric multilayer films for packaging presents low interest for mechanical recycling due to the poor properties and low commercial value of the recycled material generated as polymeric blends. Multilayer films of low-density polyethylene (LDPE) and polyamide 6 (PA6) is a typical material used for packaging applications. The aim of this study was to evaluate the action of the concentration of maleic anhydride grafted polyethylene (PE-g-MA) on the compatibilization of LDPE/PA6 blends generated from mechanical recycling of multilayer films containing both polymers. The action of the PE-g-MA on the properties of the LDPE/PA6 blends was evaluated by tensile tests, optical microscopy, melt flow rate, and scanning electron microscopy. The use of PE-g-MA at 2.5 wt% as a compatibilizer during reactive extrusion of the multilayer films waste has showed the best result for production of the respective recycled LDPE/PA6 blends.

Polymeric materials constitute a considerable fraction of waste computer equipment and polymers acrylonitrile-butadiene-styrene and high-impact polystyrene are the main thermoplastic polymeric components found in waste computer equipment. Identification, separation and characterisation of additives present in acrylonitrile-butadiene-styrene and high-impact polystyrene are fundamental procedures to mechanical recycling of these polymers. The aim of this study was to evaluate the methods for identification of acrylonitrile-butadiene-styrene and high-impact polystyrene from waste computer equipment in Brazil, as well as their potential for mechanical recycling. The imprecise utilisation of symbols for identification of the polymers and the presence of additives containing toxic elements in determinate computer devices are some of the difficulties found for recycling of acrylonitrile-butadiene-styrene and high-impact polystyrene from waste computer equipment. However, the considerable performance of mechanical properties of the recycled acrylonitrile-butadiene-styrene and high-impact polystyrene when compared with the virgin materials confirms the potential for mechanical recycling of these polymers.