Aviation industry has the challenge of halving CO2 emissions by 2050, as compared to 2005. An alternative are drop-in biofuels, which are sustainable and fully compatible with aircraft engines and also can be mixed with fossil jet fuel. Among the feedstock for biojet fuel production, licuri (Syagrus coronata) can be highlighted as most of its fatty acids are in the jet fuel range. Thereby, this work investigated the composition and physicochemical characterization of licuri oil and licuri biodiesel, both with satisfactory results according to international standards, with the purpose of obtaining hydrocarbons in the range of jet fuel from these feedstock, by catalytic deoxygenation. The semi-batch reaction, using a 5% Pd/C catalyst at 300 °C and 207 psi, produced n-alkanes with a conversion of up to 39.2%. The n-alkane selectivity was 80.7%, in addition to CO2 selectivity of 83.4% for biodiesel, indicating the preference for the decarboxylation pathway and also confirming licuri as a potential raw material for biojet fuel.
27 February 2011 in Journal of Thermal Analysis and Calorimetry
Biodiesel is an increasingly attractive alternative to diesel fuel. The main component of Babassu biodiesel is lauric acid (C12:0), which is a saturated fatty acid with a high melting point. Controlling flow properties, such as viscosity and the cold filter plugging point, is critical because viscosity affects atomization, and crystal formation resulting from decreases in temperature can negatively affect engine starting and performance. To evaluate its flow characteristics more fully, the rheological properties of babassu biodiesel were analyzed, taking into account variations in temperature. The crystallization temperature was determined by modulated temperature differential scanning calorimetry (MT-DSC). The curve of biodiesel viscosity as a function of the biodiesel refrigeration temperature contained an inflection point (corresponding to a steep increase in viscosity) that was coincident with both the transition from a Newtonian-type flow to a pseudoplastic-type flow and the crystallization temperature obtained by MT-DSC, indicating that the appearance of crystals in the biodiesel increased its viscosity. The rheological properties of fatty acid methyl and ethyl mixtures (FAME and FAEE) with metropolitan diesel were also evaluated; a higher FAME percentage reduced viscosity in blends up to B100.
The present work aims to evaluate the potential of Al-MCM-41 and Ni/Al-MCM-41 catalysts for the production of renewable hydrocarbons through the fast pyrolysis of palm oil. Al-MCM-41 mesoporous material was synthesized by the hydrothermal route. The Ni/Al-MCM-41 catalyst was obtained by the wet impregnation method of the Al-MCM-41 material (support) previously synthesized with 2.3% metal in relation to the support mass. The thermal pyrolysis of palm oil yielded many oxygenated compounds with a very high molecular mass. The pyrolysis of the oil under the action of Al-MCM-41 presented greater selectivity when compared to thermal pyrolysis, obtaining 63% of hydrocarbons in the C11–C15 region. The catalytic pyrolysis of the oil with Ni/Al-MCM-41 showed a high deoxygenation rate, obtaining a hydrocarbon percentage equal to 78%, in addition to obtaining a percentage of hydrocarbons equal to 46% in the region of interest, viz., C11–C15, demonstrating the potential of the Ni/Al-MCM-41 catalyst for renewable hydrocarbons production (bio-jet fuel) from palm oil.
Rich in cellulose, the agro-industrial residue of “Cocos nucifera L.” stands out due to its high global production. In view of this, this research into the development of cellulose nanofibrils from green coconut fiber residue evaluated the fiber produced from an alkaline pre-treatment associated with a grinding process using a colloidal mill, which produced pure and renewable cellulose with characteristics similar to those of commercial celluloses. FTIR and XRD spectroscopy analyses showed that the methodologies established for coconut fiber are efficient in removing amorphous groups. The XRD corroborated the spectrogram and revealed a peak at 2θ = 22°, corresponding to the crystalline region of cellulose I. Both analyses were preceded by thermal analysis showing a reduction in lignin and an increase in the cellulose fraction. The AFM and SEM morphological micrographic analyses confirm the efficiency of the mechanochemical treatment in producing nanometric fibers, which, when submitted to rheology analyses, presented the desired gel profile.
16 April 2013 in Journal of Thermal Analysis and Calorimetry
Lignin is the most structurally complex component of lignocellulosic biomass. Each year, thousands of tons of lignin-rich residues from enzymatic hydrolysis are generated in sugarcane-based cellulosic ethanol biorefineries. The current study specifically utilizes lignin extracted from sugarcane bagasse as the primary feedstock for biochar production, rather than employing the raw bagasse itself. This study investigates, through pyrolytic thermal treatment of two lignin sources, the production of biochars and the evaluation of their potential applications. Kraft commercial lignin and sugarcane bagasse lignin samples, along with their corresponding biochars, were characterized by elemental and proximate analyses, higher heating value determination, spectroscopic techniques, thermogravimetric analysis, X-Ray diffraction, scanning electron microscopy coupled with energy-dispersive spectroscopy, and true density measurements. The results revealed a lower contamination level associated with the extraction process and confirmed the amorphous nature of sugarcane bagasse lignin and its derived biochar. An O/C ratio of approximately 0.3 was obtained for the sugarcane bagasse lignin biochar based on both elemental and Raman spectroscopy analyses. Both elemental composition assessment and Raman spectroscopic analysis indicated that all biochar specimens exhibited hydrogen-to-carbon (H/C) ratios exceeding 0.5. The analyses, therefore, indicated that the biochar derived from sugarcane lignin exhibited higher energy density, moderate stability and a high carbon content. The proposed approach thus provides promising alternatives for the valorizing lignin residues derived from second-generation ethanol production processes.