Objective: Thisin vivostudy, aimed to biomechanically, histomorphometrically and histologically evaluate an implant surface coated with nanostructured hydroxyapatite using the wet chemical process (biomimetic deposition of calcium phosphate coating) when compared to a dual acid-etching surface.Material and methods: Ten sheep (2–4 years old) received 20 implants, 10 with nanostructured hydroxyapatite coating (HAnano), and 10 with dual acid-etching surface (DAA). The surfaces were characterized with scanning electron microscopy and energy dispersive spectroscopy; insertion torque values and resonance frequency analysis were measured to evaluate the primary stability of the implants. Bone-implant contact (BIC) and bone area fraction occupancy (BAFo) were evaluated 14 and 28 days after implant installation.Results: The HAnano and DAA groups showed no significant difference in insertion torque and resonance frequency analysis. The BIC and BAFo values increased significantly (p<0.05) over the experimental periods in both groups. This event was also observed in BIC value of HAnano group. The HAnano surface showed superior results compared to DAA after 28 days (BAFo, p = 0.007; BIC, p = 0.01).Conclusion: The results suggest that the HAnano surface favors bone formation when compared to the DAA surface after 28 days in low-density bone in sheep.

Objective: The aim of this systematic review (SR) was to evaluate the effects of xenogenic collagen matrix (XCM) on the outcomes of clinical treatments of patients with Miller class-I or -II gingival recessions. Materials and methods: Articles that were published before March 2018 were electronically searched in four databases without any date or language restrictions and manually searched in regular journals and gray literature. The eligibility criteria comprised randomized controlled trials (RCTs) and prospective controlled trials with follow-up periods of 6 months or more that compared the performance of XCM in the treatment of Miller class-I or -II gingival recessions. This SR was registered in PROSPERO under number CRD42018106118. Results: Nine RCTs published between 2010 and 2018 were included in this SR. The percentage of root coverage (RC) was significantly higher (p = .0003) when gingival recessions were treated with XCM when compared to coronally advanced flap (CAF) alone. In addition, the parameters of keratinized mucosa width (KMW) (p = .006) and gingival thickness (GT) (p = .0003) were also improved when the XCM was used in comparison to the CAF alone. There was not a statistically significant difference (p = .22) between the clinical attachment level (CAL) achieved with the use of XCM and that achieved with CAF alone. RC with the use of XCM, when compared to connective tissue grafts (CTGs) (p = .09) and enamel matrix derivative (EMD) (p = .62), there was no significant difference; however, XCM yielded lower RC than CTG in the treatment of Miller class-I or -II gingival recessions. Conclusions: Based on both the individual studies’ outcomes and the pooled estimates, it can be concluded that the use of XCM improves the RC, KMW and GT in the treatment of gingival recessions when compared to CAF alone and may be a viable alternative to use of CTG.

This systematic review (SR) aimed to evaluate implant survival rate, marginal bone loss (MBL), and biological/prosthetic complications of extra-short 4 mm dental implants. An electronic search without language or date restrictions was performed in five databases and in gray literature for articles published until August 2020. Prospective cohort studies and randomized clinical trials (RCTs) that evaluated the clinical performance of extra-short 4 mm dental implants were included. Studies were independently assessed for risk of bias using the Cochrane Collaboration’s tool. The protocol of this SR was registered in the PROSPERO database under number CRD42019139709. Four studies were included in the present SR. There was no significant difference in implant survival rate (p = 0.75) between extra-short 4 mm and long implants. After 12 months of function, the extra-short implants had a significantly (p = 0.003) lower marginal bone loss (MBL) rate when compared to long implants. Extra-short implants had a lower number of biological and prosthetic complications when compared to long implants. After 12 months of follow-up, extra-short 4 mm dental implants placed in the mandible exhibit satisfactory clinical outcomes concerning implant survival rate and MBL when compared to longer implants, with a low number of biological and prosthetic complications. A higher number of RCTs with longer follow-up is necessary for the future.

As tecnologias digitais e automatizadas atuais permitem um fluxo de trabalho completamente digital, possibilitando a realização do planejamento e da finalização da restauração em uma única sessão clínica, otimizando tempo e custos do tratamento. Este artigo descreve a aplicação de um fluxo de trabalho totalmente digital com fabricação automatizada em ambiente clínico odontológico, para a resolução de um caso clínico no qual o primeiro pré-molar superior esquerdo foi restaurado com coroa implantossuportada. Os métodos atuais de planejamento digital e fabricação automatizada oferecem alta previsibilidade para as restaurações protéticas. Embora o custo ainda seja um fator limitante, os equipamentos e softwares necessários estão se tornando mais acessíveis a cada dia. A possibilidade de reduzir o tempo de planejamento e confecção das reabilitações, aliada à fabricação das restaurações na própria clínica, em sessão única, é altamente atrativa tanto para os profissionais quanto para os pacientes. Palavras-chave: Técnica de Moldagem Odontológica; Planejamento de Prótese Dentária; Prótese Dentária Fixada por Implante; Porcelana Dentária.