Highly alkaline and highly toxic red mud and other bulk industrial solid wastes become severely accumulated, posing huge risks such as soil degradation and environmental pollution. It is urgent to develop a long-term and stable resource disposal method. In the present research, artificial lightweight aggregates were fabricated utilizing industrial solid residues including red mud, phosphate tailing powder, and fly ash as raw materials. The physical characteristics, microstructure, heavy metal leaching attributes, and freeze–thaw resistance under different mixed water and curing conditions were studied. The results showed that, under the optimal curing condition (steam curing temperature of 80 °C and curing time of 10 h), lightweight aggregates exhibited the best comprehensive performance, with favorable trends in bulk density, apparent density, softening coefficient, and 1 h water absorption. In addition, the impact of extending the curing time on the further enhancement of the cylinder crush strength is limited. The microscopic morphology study showed that the hydration products in lightweight aggregates are primarily N-A-S-H and C-(A)-S-H, forming a strong colloidal structure and evenly dispersed on the particle surface, thereby improving its strength. Moreover, the heavy metal leachates (Cr, Pb, As, Cu, and Ni) from the lightweight aggregates met the environmental discharge criteria for non-hazardous substances.
24 November 2025 in International Journal of Environmental Science and Technology
In this study, aiming to determine the potential pollution risks to the soil foundation caused by permeable pavement after its operation, a fully permeable asphalt pavement system is constructed. Through an accelerated simulation of a three-year cumulative rainfall test, the cumulative characteristics of pollutants in the soil foundation of the permeable asphalt pavement were studied, and a risk assessment of heavy metal pollution was carried out. The results show that N and P pollution is relatively serious. TN and NH4+-N decrease with the increase of the soil foundation depth (0–50 cm), and there is an obvious surface accumulation phenomenon. The average contents at a depth of 0–10 cm are 1219 mg/kg and 443 mg/kg, respectively. The content of TP first shows a decreasing trend and then an increasing one, and it faces the risks of surface accumulation and leaching loss in the middle and lower parts. Although the average contents of Cu, Pb and Zn at different depths all meet the requirements of the Soil Environmental Quality Standard (for agricultural land), they are all higher than the background values of soil elements in Jiangsu Province. Among them, Cu and Zn pose a considerable ecological risk to the environment, especially with serious enrichment in the surface layer. The above cumulative characteristics of pollutants in the fully permeable asphalt pavement provide reference value for extending the service life of the permeable pavement system.