Presently, the use of fossil fuels is not ecologically sustainable, which results in the need for new alternative energies such as biodiesel. This work presents a review of the classification of the lipidic feedstocks and the catalysts for biodiesel production. It also presents the pros and cons of the different processes and feedstocks through which biodiesel is obtained. In this context, cooking oil (WCO) has emerged as an alternative with a high potential for making the process sustainable. A detected limitation to achieving this is the high content of free fatty acids (FFA) and existing problems related to homogeneous and heterogeneous catalysts. To overcome this, the use of bifunctional catalysts is being evaluated by the scientific community. Thus, this work also explores the advances in the study of bifunctional catalysts, which are capable of simultaneously carrying out the esterification of free fatty acids (FFA) and the triglycerides present in the WCO. For the sake of an improved understanding of biodiesel production, flow diagrams and the mechanisms implied by each type of process (enzymatic, homogenous, and heterogeneous) are provided. This article also highlights some of the challenges in catalyst development for sustainable biodiesel production from low-grade raw materials.

The presence of various drugs in wastewater has generated growing concern about the contamination of water bodies. This requires urgent attention and the development of effective methods for their degradation in aquatic ecosystems. The present study evaluates the efficiency of metformin (MET) degradation via various photochemical processes—photolysis, H₂O₂ photodecomposition, photocatalysis, and photo-Fenton—using iron-pillared bentonite clays (Fe-PILC) as a catalyst. The influence of radiation wavelength (254 nm and visible light) was investigated, while MET degradation, H₂O₂ consumption, and total organic carbon (TOC) removal were monitored as key response variables. Structural characterization confirmed successful pillaring, increasing the surface area of bentonite from 35 to 246 m²/g, with iron content at 11 wt. % quantified by atomic absorption spectroscopy. Fe₃O₄ and FeO were identified using XPS, and a 2.08 eV band-gap energy was revealed via diffuse reflectance spectroscopy. Experiments were conducted at environmentally relevant MET concentrations (13,000 ng L⁻¹) in a 0.1 L batch photoreactor at 25 °C. The results demonstrate that (i) photo-Fenton was the most efficient process to remove and mineralize MET (100% degradation after 10 min and 83% mineralization after 90 min); (ii) Fe-PILC is effectively activated at λ < 700 nm, enabling 75% mineralization under visible light; (iii) hydroxyl radicals and valence band holes were the primary oxidative species driving MET oxidation; and (iv) cyanoguanidine and carboxylic acids were identified as main oxidation by-products via UHPLC. Pseudo-first-order kinetic constants were determined for all processes, offering insight into their relative efficiencies. Notably, the rate constant for photo-Fenton under visible light (0.406 min⁻¹) was comparable to that under UV -light (0.545 min⁻¹), highlighting the potential of visible light-driven treatments. Therefore, this study demonstrated the metformin degradation capability of iron-pillared clays under both visible and UV light.

Metformin (MET) is a widely prescribed pharmaceutical compound used for the management of glucose levels and body weight. However, it is only partially metabolized in the human body, and a significant fraction is excreted unchanged, leading to its frequent detection in aquatic environments. Consequently, the removal of MET from wastewater has become a matter of increasing concern due to its potential impact on aquatic ecosystems. Furthermore, as a nitrogen-containing compound, MET has been extensively employed as a model pollutant to evaluate the performance of physical and chemical treatment technologies for pharmaceutical contaminants. This review aims to critically assess and summarize the efficiency and key limitations of various processes applied for MET removal. The reviewed approaches include physical–chemical treatments such as adsorption; biological treatments (activated sludge, biofiltration and phytoremediation), which rely on microbial metabolic activities or plant uptake to degrade or sequester metformin; and advanced oxidation processes (AOPs), such as ozonation, photolysis, photocatalysis, Fenton, and photo-Fenton systems. The efficiency of MET removal and mineralization is strongly dependent on the treatment method employed. Among the evaluated processes, the photo-Fenton reaction emerges as one of the most promising technologies, achieving high removal efficiencies under both ultraviolet (UV) and visible (Vis) irradiation.

Este trabajo es el resultado de la evaluación de los reportes de las estancias profesionales de los estudiantes del Programa Educativo de Ingeniero Químico, de las generaciones 2001-06 a 2006-2011, para identificar las principales funciones que desempeñan en sus estancias profesionales, las áreas donde se insertan y el sector que los contrata. La información recabada de las estancias profesionales es un indicador del grado de pertinencia del currículo del programa. Se determinó que 82 % de los alumnos se colocaron en industrias y áreas que tienen que ver con su perfil profesional de egreso; destacan las áreas de calidad, ingeniería aplicada y servicios, y la de seguridad, higiene y protección ambiental. Se identificó que los alumnos desempeñan principalmente actividades propias de su formación y se reconocieron áreas de oportunidad como la de mejorar las habilidades de comunicación oral y escrita y el manejo de equipos de laboratorio especializados.