Collisions in underwater acoustic networks can not be tolerated due to the fundamental differences between underwater acoustic propagation and terrestrial radio propagation. Thus conceiving medium access protocols that avoid collision to the most possible extent is of paramount importance. In this paper, a multi-channel MAC protocol, MC-UWMAC, especially designed for underwater acoustic sensor networks, is proposed and evaluated. MC-UWMAC is an energy efficient MAC protocol that aims at achieving a collision free communication. MC-UWMAC operates on a single slotted control channel to avoid the missing receiver problem and multiple data channels to improve the network throughput. To guarantee to the most possible extent a collision free communication, MC-UWMAC uses two key newly designed procedures: i) a grid based slot assignment procedure on the common slotted control channel that approaches the 2-hop conflict free slot assignment and ii) a quorum based data channel allocation procedure. More precisely, according to MC-UWMAC, a sender uses its own dedicated slot on the common control channel for handshaking with an intended neighbor receiver. However, data transmission takes place in a unique data channel especially reserved for this pair of neighbor nodes. In fact, MC-UWMAC reserves for each pair of neighbor nodes a unique data channel that aims at being 2-hop conflict free. As such, the probability of collision is highly reduced and even completely mitigated in some scenarios. In addition, by using multiple channels, MC-UWMAC allows multiple data communications along with handshaking on the common control channel to take place at the same time and hence the network throughput as well as energy efficiency are improved. Simulation results show that MC-UWMAC can greatly improve the network performance especially in terms of energy consumption, throughput and end-to-end delay.

The Internet of Things (IoT) is a new future technology that is aimed at connecting billions of physical-world objects to the IT infrastructure via a wireless medium. Many radio access technologies exist, but few address the requirements of IoT applications such as low cost, low energy consumption, and long range. Low-Power wide-area network (LPWAN) technologies, especially SigFox, have a low data rate that makes them suitable for IoT applications, especially since the lower the data rate, the longer the usable distance for the radio link. SigFox technology achieves as a main objective network reliability by striving for the successful delivery of data messages through redundancy. Doing so results in one of the SigFox weaknesses, namely the high collision rate, which questions SigFox scalability. In this work, we aimed at avoiding collisions by changing SigFox’s Aloha-based medium access protocol to TDMA and by using only orthogonal channels while removing redundancy. Consequently, every node sends a single copy of the data message on a given orthogonal channel in a specific time slot. To achieve this, we implemented a slot- and channel-allocation protocol (SCAP) on top of SigFox. In other words, our goal was to improve SigFox’s scalability by implementing two mechanisms: time slot allocation and channel allocation. Performance analysis was conducted on large networks with sizes ranging from 1000 to 10,000 nodes to evaluate both technologies: the original SigFox and SCAP SigFox. The simulation results showed that SCAP SigFox highly reduced the probability of collision and energy consumption when compared to the original SigFox. Additionally, SCAP SigFox had a greater throughput and packet delivery ratio (PDR).

Underwater mobile acoustic sensor networks (UW-ASNs) require the design of new networking protocols due to fundamental differences with terrestrial wireless sensor networks. The performance of these protocols is highly impacted by the mobility of sensors, especially when they are freely floating. In such mobile UW-ASNs, nodes move with the water currents but are constrained by the gravitational weight of the sensor along with the water resistance and the buoyant force. A realistic mobility model that can reflect the physical movement of randomly scattered and freely floating sensor nodes under ocean currents provides clearer understanding of the communication challenges and hence helps conceiving efficient communication protocols. In this paper, we first propose an exhaustive physically inspired mobility model which meticulously captures the dynamics of underwater environments. We, then, study the resulting time evolution of network coverage and connectivity. Our objective is to provide the underwater network research community with a realistic mobility model that could be exploited in conceiving networking communication protocols such as routing, localization, and medium access. Namely, we show that the network mobility effect on coverage and connectivity is more significant in intermediately dense UW-ASNs. Less effect is recorded on the coverage and connectivity for low- and high-density UW-ASNs.

LoRa networks represent a promising technology for Internet of Things applications due to their long range, low cost, and energy efficiency. However, their ALOHA-based access method and duty cycle restrictions can limit their scalability and reliability in high-density networks. To address such a challenge, this article proposes the autonomous time-slotted LoRa (ATS-LoRa), protocol that allows LoRaWAN nodes to autonomously determine their optimal transmission parameters without extensive downlink transmissions from the gateway. ATS-LoRa utilizes the geographical coordinates of the nodes and their gateway in a novel way to allow them to determine their appropriate transmission parameters, such as the spreading factor, the channel frequency, and the slot ID. ATS-LoRa performance is evaluated through extensive simulations under different operating conditions showing an average throughput of around 47 times better than the adaptive data rate algorithm of LoRaWAN protocol.