This study explores the development of new room-temperature NO2 sensors utilizing carbon nanofibers (CNFs), single-walled carbon nanotubes (SWCNTs), and their hybrids with reduced graphite oxide (rGO), fabricated via a facile drop casting method with varying concentrations of carbon/ethanol mixtures. The concentration-dependent relation of sensor response to NO2 has been found. Comprehensive characterization techniques, including electron microscopy, Raman spectroscopy, optical microscopy, and X-ray diffraction were employed to analyze the sensing materials. Our results reveal that CNFs exhibit superior sensitivity, reaching −1.32%/ppm at an optimal suspension concentration of 1.5 mg/mL, outperforming SWCNTs. The creation of hybrid composites, specifically CNFs/rGO and SWCNTs/rGO, further enhances sensing performance due to synergistic effects. Molecular dynamics simulations revealed increased adsorption behavior of the CNFs/rGO hybrid sensing material. The fabricated devices, based on all-carbon composites, are effective and energy-efficient platforms for NO2 detection, offering promising solutions for environmental monitoring, the chemical industry, and industrial safety applications.
Cerium stannate Ce2Sn2O7 was obtained by the hydrothermal method from a mixture of cerium (III) nitrate and sodium stannate solutions with the addition of sodium hydroxide solution to pH 8–9. The phase composition of the hydrothermal synthesis product was studied using thermal anlysis, X-ray diffraction, scanning electron microscopy and FTIR spectroscopy. It was found that at a synthesis temperature of 180 °C, a single-phase cerium stannate with a pyrochlore structure, the particles of which have a cubic shape of 2–5 μm in size, is formed. It was shown that the response of the Ce2Sn2O7/CNFs composite to NO2 at room temperature is 41% at 10 ppm. The composite material demonstrated the possibility of its application in supercapacitors, showing a specific capacitance of 165–200 F/g at 2 mV/s. It was found that the specific capacitance of the Ce2Sn2O7/CNFs composite significantly exceeds that of single-phase cerium stannate.
This study is devoted to the determination of the role of aerosol spraying in the formation of NO2 sensor properties of carbon nanofiber (CNF)-based films. This is the first paper to systematically apply the aerosol spraying technique to CNF-based films and link the spraying parameters directly to sensor performance metrics (response, signal-to-noise ratio, response times, etc.). Chemiresistive gas sensors were created based on CNFs and tested at room temperature (25 ± 1 °C). It has been shown that the increase in the concentration of the CNF/ethanol mixture used for spraying from 3 to 30 mg/mL led to a growth in sensor response from 1.2% to 12.0% at 2 ppm NO2. The increase in the thickness of the CNF film of the sensor induced a growth in ΔR/R0 to NO2 that is attributed to the formation of a porous film. With increased film thickness, the response improves (from 7.0% to 10.6% at 2 ppm NO2) as does the signal-to-noise ratio (from 735:1 to 1892:1). The creation of hybrid all-carbon composites based on CNFs and multi-walled carbon nanotubes (MWCNTs) resulted in a decrease in both sensor response and signal-to-noise ratio; however, the response time and recovery degree improved. Two types of hybrid materials based on CNFs and MWCNTs were created using aerosol spraying to enhance the sensor behavior of CNFs. The obtained data confirm the dominant role of the thickness of CNF-based films and their density (in terms of distance between nearest carbon inclusions within the film) in sensor characteristics. The machine learning data used to describe the sensing behavior of two gases with opposite resistance changes when in contact with CNFs, namely NO2 and NH3, showed final accuracies of 92.13% on training data and 91.98% on validation data.
This work reports the synthesis of 80%Fe–10%Mo/10% Al 2 O 3 catalysts via solution combustion synthesis using oxalic acid as fuel. The catalysts were tested in methane decomposition at 850 °C and 1 atm for 6 h. The synthesized samples were characterized by X-ray diffraction, transmission electron microscopy, photosedimentation analysis, etc. The specific carbon yield ranged from 5.8 to 8.4 g/gcat and the hydrogen yield from 1.0 to 1.4 mol/gcat, respectively. Catalytic decomposition of methane over Fe–Mo/Al 2 O 3 led to the formation of mixture of bamboo-like carbon nanotubes and multi-walled carbon nanotubes. It was found that the highest yield of MWCNTs was reached at fuel-to-oxidizer ratio of 0.022.