Nutthakritta Phromviyo Nutthakritta Phromviyo

Dr. Nutthakritta Phromviyo Nutthakritta Phromviyo


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
WTWattana Tuichai
Wattana Tuichai
PKPornsawan Kum-Onsa
Pornsawan Kum-Onsa
SDSupamas Danwittayakul
Supamas Danwittayakul
JMJedsada Manyam
Jedsada Manyam
Viyada HarnchanaViyada Harnchana
Viyada Harnchana
PCPrinya Chindaprasirt
Prinya Chindaprasirt
The enhanced dielectric permittivity (ε′) while retaining a low loss tangent (tanδ) in silver nanoparticle−(In1/2Nb1/2)0.1Ti0.9O2/poly(vinylidene fluoride) (Ag-INTO/PVDF) composites with different volume fractions of a filler (fAg-INTO) was investigated. The hybrid particles were fabricated by coating Ag nanoparticles onto the surface of INTO particles, as confirmed by X-ray diffraction. The ε′ of the Ag−INTO/PVDF composites could be significantly enhanced to ~86 at 1 kHz with a low tanδ of ~0.044. The enhanced ε′ value was approximately >8-fold higher than that of the pure PVDF polymer for the composite with fAg-INTO = 0.5. Furthermore, ε′ was nearly independent of frequency in the range of 102–106 Hz. Therefore, filling Ag−INTO hybrid particles into a PVDF matrix is an effective way to increase ε′ while retaining a low tanδ of polymer composites. The effective medium percolation theory model can be used to fit the experimental ε′ values with various fAg-INTO values. The greatly increased ε′ primarily originated from interfacial polarization at the conducting Ag nanoparticle–PVDF and Ag–INTO interfaces, and it was partially contributed by the high ε′ of INTO particles. A low tanδ was obtained because the formation of the conducting network in the polymer was inhibited by preventing the direct contact of Ag nanoparticles.

27 November 2021 in Polymers
Verified
Journal Article
Open access
PDF file
KSKaniknun Sreejivungsa
Kaniknun Sreejivungsa
NPNutthakritta Phromviyo Nutthakritta Phromviyo
Nutthakritta Phromviyo Nutthakritta Phromviyo
ESEkaphan Swatsitang
Ekaphan Swatsitang
PTPrasit Thongbai
Prasit Thongbai
Poly(vinylidene fluoride) (PVDF) nanocomposites were fabricated by incorporating BaTiO3 nanoparticles (particle size of ~100 nm, nBT), which were deposited by Au nanoparticles (nAu) with an average particle size of 17.8 ± 4.0 nm using a modified Turkevich method. Systematic characterizations on the synthesized nAu-nBT hybrid nanoparticles and nAu-nBT/PVDF nanocomposites with different contents of a filler were performed. The formation of nAu-nBT hybrid nanoparticles was confirmed with the calculated nAu:nBT ratio of 0.5:99.5 wt.%. The homogeneous dispersion of nAu and nBT in the PVDF polymer was obtained due to the interaction between the negative surface charge of the nAu-nBT filler (compared to that of the nBT) and polar β-PVDF phase, which was confirmed by the zeta potential measurement and Fourier-transform infrared spectroscopy, respectively. A significantly increased dielectric permittivity (ε′ ~ 120 at 103 Hz) with a slight temperature-dependent of <±15% ranging from −20 to 140 °C was obtained. Notably, a low loss tangent (tanδ < 0.08) was obtained even at a high temperature of 140 °C. Therefore, incorporating a PVDF polymer with nAu-nBT hybrid nanoparticles is an attractive method to improve the dielectric properties of a PVDF polymer for dielectrics applications.

20 August 2022 in Molecules
Verified
Journal Article
Open access
PDF file
PSPariwat Saengvong
Pariwat Saengvong
JBJakkree Boonlakhorn
Jakkree Boonlakhorn
NCNarong Chanlek
Narong Chanlek
NPNutthakritta Phromviyo Nutthakritta Phromviyo
Nutthakritta Phromviyo Nutthakritta Phromviyo
Viyada HarnchanaViyada Harnchana
Viyada Harnchana
PTPrasit Thongbai
Prasit Thongbai
The effects of the sintering conditions on the phase compositions, microstructure, electrical properties, and dielectric responses of TiO2-excessive Na1/2Y1/2Cu3Ti4.1O12 ceramics prepared by a solid-state reaction method were investigated. A pure phase of the Na1/2Y1/2Cu3Ti4.1O12 ceramic was achieved in all sintered ceramics. The mean grain size slightly increased with increasing sintering time (from 1 to 15 h after sintering at 1070 °C) and sintering temperature from 1070 to 1090 °C for 5 h. The primary elements were dispersed in the microstructure. Low dielectric loss tangents (tan δ~0.018–0.022) were obtained. Moreover, the dielectric constant increased from ε′~5396 to 25,565 upon changing the sintering conditions. The lowest tan δ of 0.009 at 1 kHz was obtained. The electrical responses of the semiconducting grain and insulating grain boundary were studied using impedance and admittance spectroscopies. The breakdown voltage and nonlinear coefficient decreased significantly as the sintering temperature and time increased. The presence of Cu+, Cu3+, and Ti3+ was examined using X-ray photoelectron spectroscopy, confirming the formation of semiconducting grains. The dielectric and electrical properties were described using Maxwell–Wagner relaxation, based on the internal barrier layer capacitor model.

23 June 2021 in Polymers
Verified
Journal Article
Open access
PDF file
PKPornsawan Kum-Onsa
Pornsawan Kum-Onsa
NCNarong Chanlek
Narong Chanlek
JMJedsada Manyam
Jedsada Manyam
PTPrasit Thongbai
Prasit Thongbai
Viyada HarnchanaViyada Harnchana
Viyada Harnchana
PCPrinya Chindaprasirt
Prinya Chindaprasirt
Flexible dielectric polymer composites have been of great interest as embedded capacitor materials in the electronic industry. However, a polymer composite has a low relative dielectric permittivity (ε′ < 100), while its dielectric loss tangent is generally large (tanδ > 0.1). In this study, we fabricate a novel, high-permittivity polymer nanocomposite system with a low tanδ. The nanocomposite system comprises poly(vinylidene fluoride) (PVDF) co-filled with Au nanoparticles and semiconducting TiO2 nanorods (TNRs) that contain Ti3+ ions. To homogeneously disperse the conductive Au phase, the TNR surface was decorated with Au-NPs ~10–20 nm in size (Au-TNRs) using a modified Turkevich method. The polar β-PVDF phase was enhanced by the incorporation of the Au nanoparticles, partially contributing to the enhanced ε′ value. The introduction of the Au-TNRs in the PVDF matrix provided three-phase Au-TNR/PVDF nanocomposites with excellent dielectric properties (i.e., high ε′ ≈ 157 and low tanδ ≈ 0.05 at 1.8 vol% of Au and 47.4 vol% of TNRs). The ε′ of the three-phase Au-TNR/PVDF composite is ~2.4-times higher than that of the two-phase TNR/PVDF composite, clearly highlighting the primary contribution of the Au nanoparticles at similar filler loadings. The volume fraction dependence of ε′ is in close agreement with the effective medium percolation theory model. The significant enhancement in ε′ was primarily caused by interfacial polarization at the PVDF–conducting Au nanoparticle and PVDF–semiconducting TNR interfaces, as well as by the induced β-PVDF phase. A low tanδ was achieved due to the inhibited conducting pathway formed by direct Au nanoparticle contact.

13 January 2022 in Polymers
Verified
Journal Article
Open access
PDF file
NPNutthakritta Phromviyo Nutthakritta Phromviyo
Nutthakritta Phromviyo Nutthakritta Phromviyo
JBJakkree Boonlakhorn
Jakkree Boonlakhorn
PPPatcharapol Posi
Patcharapol Posi
PTPrasit Thongbai
Prasit Thongbai
PCPrinya Chindaprasirt
Prinya Chindaprasirt
Cetyl trimethyl ammonium bromide (CTAB)-modified natural rubber latex/Portland cement paste (CTAB + NL/PC) composites were fabricated by varying the NL/cement and CTAB/cement ratios to improve the elastic property of PC. The stability and workability of the CTAB-modified NL particles in the PC matrix were significantly improved. The microstructure and dielectric property analyses of PC, CTAB/PC, NL/PC, and (CTAB + NL)/PC composites were performed to describe the interaction mechanism between the CTAB-modified NL and PC. The portlandite phase in PC was reduced by incorporating CTAB + NL. Although the tensile strength of NL/PC was significantly increased, its compressive strength also greatly decreased by ~40.3%. The tensile and compressive strengths of CTAB/PC were not significantly improved. Notably, the tensile strength of (CTAB + NL)/PC was significantly increased compared to those of PC, CTAB/PC, and NL/PC, while the depreciated compressive strength was only 18.7%. The optimized compressive–tensile performance of (CTAB + NL)/PC was equal to that of PC. The dielectric constants of NL/PC, CTAB/PC, and (CTAB + NL)/PC were reduced due to the low dielectric constant of NL and the ability of CTAB to capture negative charges in the PC matrix, leading to a reduction in the negative surface charges and hence the interfacial polarization. This result was confirmed by the decreased loss tangent in a low-frequency range, which is usually reduced by decreasing the free charges. This work provides a comprehensive guideline for significantly improving the elastic property of PC while retaining a high compressive strength.

27 October 2025 in Sci
Verified
Journal Article
Open access
PDF file
UWUnchista Wongpratat
Unchista Wongpratat
NPNutthakritta Phromviyo Nutthakritta Phromviyo
Nutthakritta Phromviyo Nutthakritta Phromviyo
JWJurimart Wongsricha
Jurimart Wongsricha
SSSirion Srilarueang
Sirion Srilarueang
NCNarong Chanlek
Narong Chanlek
PTPrasit Thongbai
Prasit Thongbai
Giant dielectric oxides are attractive for next-generation capacitors and related applications, but their practical use is limited by high loss tangent (tanδ), strong temperature dependence of dielectric permittivity (ε′), and the need for energy-intensive high-temperature sintering. To address these challenges, this study focuses on the development of (In0.5Ta0.5)xTi1−xO2 (ITTO, x = 0.02–0.06) ceramics via a green egg-white solution route, targeting high dielectric performance at reduced processing temperatures. The as-calcined powders exhibited the anatase TiO2 phase with particle sizes of ~20–50 nm. These powders promoted densification at a sintering temperature of 1300 °C, significantly lower than those of conventional co-doped TiO2 systems. The resulting ceramics exhibited refined grains, high relative density, and homogeneous dopant incorporation, as confirmed by XRD, SEM/TEM, EDS mapping, and XPS. Complementary density functional theory calculations were performed to examine the stability of In3+/Ta5+ defect clusters and their role in electron-pinned defect dipoles (EPDDs). The optimized ceramic (x = 0.06, 1300 °C) achieved a high ε′ of 6.78 × 103, a low tanδ of 0.038, and excellent thermal stability with Δε′ < 3.9% from 30 to 200 °C. These results demonstrate that the giant dielectric response originates primarily from EPDDs associated with Ti3+ species and oxygen vacancies, in agreement with both experimental and theoretical evidence. These findings emphasize the potential of eco-friendly synthesis routes combined with rational defect engineering to deliver high-performance dielectric ceramics with reliable thermal stability at reduced sintering temperatures.