We proposed a dual-period phase grating using a polymer-stabilized blue phase liquid crystal (PS-BPLC). High efficiencies of 38% for the short-period phase grating and 30% for the long-period phase grating have been achieved because of the electric-field-induced rectangular-like phase profile of a PS-BPLC, which agrees quite well with the simulation results. The diffraction angle and the diffraction efficiency can be alternatively tuned by a bias voltage and intensity of applied voltage. The diffracted light of each diffraction order is elliptically polarized, and its ellipticity is larger than that induced by using the conventional nematic LCs. Such a device also shows sub-millisecond response time and holds great potential for photonics applications.
Image sticking in thin film transistor-liquid crystal displays (TFT-LCD) is related to the dielectric property of liquid crystal (LC) material. Low threshold value TFT LC materials have a weak stability and the free ions in them will be increased because of their own decomposition. In this study, the property of TFT LC material MAT-09-1284 doped with γ-Fe2O3 nanoparticles was investigated. The capacitances of parallel-aligned nematic LC cells and vertically aligned nematic LC cells with different doping concentrations were measured at different temperatures and frequencies. The dielectric constants perpendicular and parallel to long axis of the LC molecules ε⊥ and ε//, as well as the dielectric anisotropy Δε, were obtained. The dynamic responses and the direct current threshold voltages in parallel-aligned nematic LC cells for different doping concentrations were also measured. Although the dielectric anisotropy Δε decreased gradually with increasing temperature and frequency at the certain frequency and temperature in LC state for each concentration, the doping concentration of γ-Fe2O3 nanoparticles less than or equal to 0.145 wt % should be selected for maintaining dynamic response and decreasing free ions. This study has some guiding significance for improving the image sticking in TFT-LCD.
Improving image sticking in liquid crystal display (LCD) has attracted tremendous interest because of its potential to enhance the quality of the display image. Here, we proposed a method to evaluate the residual direct current (DC) voltage by varying liquid crystal (LC) cell capacitance under the combined action of alternating current (AC) and DC signals. This method was then used to study the improvement of image sticking by doping γ-Fe2O3 nanoparticles into LC materials and adjusting the friction torque difference of the upper and lower substrates. Detailed analysis and comparison of residual characteristics for LC materials with different doping concentrations revealed that the LC material, added with 0.02 wt% γ-Fe2O3 nanoparticles, can absorb the majority of free ions stably, thereby reducing the residual DC voltage and extending the time to reach the saturated state. The physical properties of the LC materials were enhanced by the addition of a small amount of nanoparticles and the response time of doping 0.02 wt% γ-Fe2O3 nanoparticles was about 10% faster than that of pure LC. Furthermore, the lower absolute value of the friction torque difference between the upper and lower substrates contributed to the reduction of the residual DC voltage induced by ion adsorption in the LC cell under the same conditions. To promote the image quality of different display frames in the switching process, we added small amounts of the nanoparticles to the LC materials and controlled friction technology accurately to ensure the same torque. Both approaches were proven to be highly feasible.
Polymer-stabilised blue-phase liquid crystal (PS-BPLC) is a soft artificial three-dimensional photonic crystal (PC) functional material for optics and optoelectronics because of its superior optical properties. In this work, we demonstrated that PS-BPLC film could sense and selectively detect the xylene, heptane, cyclohexane, dichloromethane and ethyl alcohol vapours rapidly and accurately. When the PS-BPLC film was alternately exposed to volatile vapours and air, the Bragg reflection wavelength of the PS-BPLC could reversibly and significantly shift because of the adsorption and desorption of the volatile vapours. Different organic vapours could be well discriminated by the linearity and the critical concentration at which the Bragg reflection disappeared. This organic vapour sensor also had a good sensitivity, high repeatability, humidity independence and long-term stability, which promote a widespread use in environmental monitoring, point-of-care biomedical analysis and optical security coatings. Graphical abstract
We demonstrated a fast switchable dual-model grating based on a polymer-stabilized sphere phase liquid crystal. To form binary periodicity layers, the polymer-stabilized sphere phase liquid crystal precursor was sequence ultraviolet cured at an isotropic and sphere phase. This grating jointly modulated both the phase and the amplitude, had six times the diffraction efficiency of that fabricated with polymer-stabilized blue phase liquid crystal. Moreover, the dual-model tunable grating shown polarization-independent and submillisecond response time, which may hold a great potential application in diffractive optics.