The concept of intelligent tires has drawn the attention of researchers in the areas of autonomous driving, advanced vehicle control, and artificial intelligence. The focus of this paper is on intelligent tires and the application of machine learning techniques to tire force estimation. We present an intelligent tire system with a tri-axial acceleration sensor, which is installed onto the inner liner of the tire. Neural Network techniques are used for real-time processing of the sensor data. The accelerometer is capable of measuring the acceleration in x,y, and z directions. When the accelerometer enters the tire contact patch, it starts generating signals until it fully leaves it. Simultaneously, by using MTS Flat-Trac test platform, tire actual forces are measured. Signals generated by the accelerometer and MTS Flat-Trac testing system are used for training three different machine learning techniques with the purpose of online prediction of tire forces. It is shown that the developed intelligent tire in conjunction with machine learning is effective in accurate prediction of tire forces under different driving conditions. The results presented in this work will open a new avenue of research in the area of intelligent tires, vehicle systems, and tire force estimation.

In order to make full use of the direct yaw control (DYC) in electric vehicles with four in-wheel motors (IWMs), this paper presents an adaptive SMC control scheme to improve the handling and stability based on a novel stability index proposed to quantitatively represent stability level. Firstly, a vehicle stability evaluation method is designed based on the front and rear tire slip angles phase plane and the quantitative stability index is derived according to the area where the states stay and the changing trend of the states. Secondly, a sliding mode controller (SMC) is designed to track the reference obtained by a two degrees of freedom (DoF) vehicle model as the desired vehicle motion. To enhance both vehicle handling and stability, the weight of the sliding surface is adaptively scheduled according to this stability index. The torque of each wheel is then distributed by solving the optimal adhesion rate consumption problem. Finally, the effectiveness of the proposed method is verified by CarSim–Simulink co-simulation. The simulation results illustrate that the proposed method can effectively improve vehicle handling and stability and has good robustness for the uncertainties of vehicle sideslip angle and road friction coefficient.

Tire slip angle is a vital parameter in tire/vehicle dynamics and control. This paper proposes an accurate estimation method by the fusion of intelligent tire technology and machine-learning techniques. The intelligent tire is equipped by MEMS accelerometers attached to its inner liner. First, we describe the intelligent tire system along with the implemented testing apparatus. Second, experimental results under different loading and velocity conditions are provided. Then, we show the procedure of data processing, which will be used for training five different machine learning techniques to estimate tire slip angles. The results show that the machine learning techniques, especially in frequency domain, can accurately estimate tire slip angles up to 10 degrees. More importantly, with the accurate tire slip angle estimation, all other states and parameters can be easily and precisely obtained, which is significant to vehicle advanced control, and thus this study has a high potential to obviously improve the vehicle safety especially in extreme maneuvers.

Understanding the dynamic behavior of tires and their interactions with roads plays an important role in designing integrated vehicle control strategies. Accordingly, having access to reliable information about tire–road interactions through tire-embedded sensors is desirable for developing enhanced vehicle control systems. Thus, the main objectives of this research are: 1) to analyze data from an experimental accelerometer-based intelligent tire acquired over a wide range of maneuvers, with different vertical loads, velocities, and high slip angles and 2) to develop a lateral force predictor based on a machine learning tool, more specifically, the Gaussian process regression (GPR) technique. It is determined that the proposed intelligent tire system can provide reliable information about the tire–road interactions even in the case of high slip angles. In addition, lateral force models based on GPR can predict forces very well, outperforming other machine learning models and providing levels of uncertainty that can be useful for designing vehicle control strategies.

Taking advantage of available measurement in Internet of Things (IoT) for intelligent transportation systems, a sideslip angle estimation method for autonomous vehicles is presented and experimentally verified by fusing global navigation satellite system (GNSS) and inertial measurement unit (IMU), and by constructing an observability index (OI). The correlation between the vehicle sideslip error and the inertial navigation system (INS) heading error is presented first. Then, the observability for the heading error in a velocity-based Kalman filter is discussed and a novel index is defined to check the observability of the heading error. The course from a single antenna GNSS in an autonomous vehicle is augmented to estimate the heading error when the observability of the heading error is low. To reject the course measurement for scenarios that include sideslip movement, a binary hypothesis test approach is applied to indicate whether the vehicle is sidesliping. In addition, based on the OI and the sideslip indicator, a hybrid feedback strategy is designed for the heading error correction. To improve the convergence rate of the heading error in the velocity-based Kalman filter, a tuning strategy is presented. The stochastical observability of the designed Kalman observer is investigated for known and stochastic initial conditions. Finally, the proposed sideslip angle estimator is experimentally validated through a vehicle test platform in critical driving scenarios. The results confirm that the proposed OI can effectively identify when the heading error is observable, and also corroborate the effectiveness of the hybrid feedback strategy and adaptation method in the Kalman observer.