Maya Kebaili

Dr. Maya Kebaili


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2024 in Polymer Bulletin
Verified
Journal Article
Open access
PDF file
LBLilia Benchikh
Lilia Benchikh
TATahar Aouissi
Tahar Aouissi
YFYazid AIT FERHAT
Yazid AIT FERHAT
HCHichem Chorfi
Hichem Chorfi
IAIlyes Abacha
Ilyes Abacha
Souad DjellaliSouad Djellali
Souad Djellali
The combination of cellulose nanocrystals (CNCs) with synthetic polymers like polypropylene (PP) offers the opportunity to create advanced nanocomposites with significant advantages in terms of mechanical properties, improved thermal stability, enhanced barrier properties, and sustainability. However, a major drawback for incorporation of CNCs in polymer matrices is their poor dispersion and incompatibility with industrial processing of many composites. This work aims to improve the dispersion of hydrophilic CNCs in a hydrophobic matrix using a method which could be adapted for the industrial level. CNCs are extracted from Ampelodesmos mauritanicus (El Diss plant) (CNCD) and incorporated in a polypropylene matrix using the masterbatch method. A first nanocomposite (PP/CNC-Gr) was prepared by adding maleic anhydride (MA) to a CNCD/PP suspension, while the second nanocomposite (PP/CNC-Co) was achieved by using a MA-grafted PP (PP-g-MA) as a third component. Concentrated masterbatch underwent solution casting followed by homogenization in a Brabender mixer. Mechanical properties comparison showed that PP/CNC-Co nanocomposites exhibited greater resistance relatively to PP/CNC-Gr nanocomposites. Moreover, PP/CNC-Co nanocomposites revealed an improved thermal stability and a higher complex viscosity, particularly with 3% of CNCD. Properties enhancements are attributed to the reaction between MA groups grafted to PP chains and hydroxyl groups of CNCDs, which enables an improved interfacial adhesion, leading to more continuous materials, as perceived from the increase in viscosity and morphology observation. On the other hand, MA reaction with PP chains and CNCD induced only a partial coverage of CNCDs during nanocrystals treatment, conferring relatively lower properties to PP/CNC-Gr nanocomposites.

17 December 2025 in Physchem
Verified
Journal Article
Open access
PDF file
MKMaya Kebaili
Maya Kebaili
AGAmina Ghedjemis
Amina Ghedjemis
LBLilia Benchikh
Lilia Benchikh
YFYazid AIT FERHAT
Yazid AIT FERHAT
IAIlyes Abacha
Ilyes Abacha
EKElhadj Kadri
Elhadj Kadri
Metallic implants used in orthopedics, such as titanium alloys, possess excellent mechanical strength but suffer from corrosion and poor bio-integration, often necessitating revision surgeries. Bioactive coatings, particularly hydroxyapatite, can enhance implant osteoconductivity, but high-purity synthetic hydroxyapatite is costly. This study investigates the development and characterization of a low-cost, biocompatible coating using hydroxyapatite derived from an unconventional natural source dromedary bone applied onto a titanium substrate via plasma spraying. Hydroxyapatite powder was synthesized from dromedary femurs through a thermal treatment process at 1000 °C. The resulting powder was then deposited onto a sandblasted titanium dioxide substrate using an atmospheric plasma spray technique. The physicochemical, structural, and morphological properties of both the source powder and the final coating were comprehensively analyzed using Scanning Electron Microscopy, Energy Dispersive X-ray Spectroscopy, X-ray Diffraction, and Fourier-Transform Infrared Spectroscopy. Characterization of the powder confirmed the successful synthesis of pure, crystalline hydroxyapatite, with Fourier-Transform Infrared Spectroscopy analysis verifying the complete removal of organic matter. The plasma-sprayed coating exhibited good adhesion and a homogenous, lamellar microstructure typical of thermal spray processes, with an average thickness of approximately 95 μm. X-ray Diffraction analysis of the coating revealed that while hydroxyapatite remained the primary phase, partial decomposition occurred during spraying, leading to the formation of secondary phases, including tricalcium phosphate and calcium oxide. Scanning Electron Microscopy imaging showed a porous surface composed of fully and partially melted particles, a feature potentially beneficial for bone integration. The findings demonstrate that dromedary bone is a viable and low-cost precursor for producing bioactive hydroxyapatite coatings for orthopedic implants. The plasma spray method successfully creates a well-adhered, porous coating, though process-induced phase changes must be considered for biomedical applications.

29 May 2025 in Physchem
Verified
Journal Article
Open access
PDF file
AGAmina Ghedjemis
Amina Ghedjemis
MKMaya Kebaili
Maya Kebaili
Kamel HEBBACHEKamel HEBBACHE
Kamel HEBBACHE
CBCherif Belebchouche
Cherif Belebchouche
EKElhadj Kadri
Elhadj Kadri
The recovery of green waste and biomass presents a significant challenge in the 21st century. In this context, this study aims to valorize waste generated by the fruit juice processing industry at the N’Gaous unit (composed of the orange peel, fibers, pulp, and seeds) as an adsorbent to eliminate an anionic dye and to enhance its adsorption capacity through thermal activation at 200 °C and 400 °C. The aim is also to determine the parameters for the adsorption process including contact time (0–120 min), solution pH (2–10), initial dye concentration (50–700 mg/L), and adsorbent dosage (0.5–10 g/L). The adsorption tests showed that waste activated at 400 °C (AR400) demonstrated a higher efficiency for removing indigo carmine (IC) from an aqueous solution than waste activated at 200 °C (AR200) and unactivated waste (R). The experimental maximum adsorption capacities for IC were 70 mg/g for unactivated waste, 500 mg/g for waste activated at 200 °C, and 680 mg/g for waste activated at 400 °C. These tests were conducted under conditions of pH 2, an equilibrium time of 50 min, and an adsorbent concentration of 1 g/L. The analysis of the kinetic data revealed that the pseudo-second-order model provides the best fit for the experimental results, indicating that this mechanism predominates in the sorption of the pollutant onto the three adsorbents. In terms of adsorption isotherms, the Freundlich model was found to be the most appropriate for describing the adsorption of dye molecules on the R, AR200, and AR400 supports, owing to its high correlation coefficient. Before adsorption tests, the powder R, AR200 and AR400 were characterized by various analyses, including Fourier transform infrared (FTIR), pH zero charge points and laser granularity for structural evaluation. According to the results of these analyses, the specific surface area (SSA) of the prepared material increases with the increase in the activation temperature, which expresses the increase in the adsorption of material activated at 400 °C, compared with materials activated at 200 °C and the raw material.