This article proposes a novel robust swing-up and balance control method using data-driven compensation signals for the Pendubot system, which is underactuated and subject to dynamic friction, backlash, and modeling uncertainty. The method involves three major developments. First, the uncertainty of the system is described by a previous sampled unknown nonlinear term and its changing rate. Compensation signals are then designed to eliminate the influence of the previous sampled unknown nonlinear term and its changing rate on the outputs of the controlled plant. Second, based on the Lyapunov stability theory, a robust swing-up control method is proposed. Third, in order to eliminate the limit cycle phenomenon caused by the uncertainty near the unstable equilibrium point, a proportional-derivative balance controller based on compensation signals is proposed. The stability and tracking error analysis show that the compensation signals can effectively eliminate the influence of dynamic friction, backlash, and modeling uncertainty on the system. Experimental results verify the effectiveness of the proposed method by showing significant improvements in production rate, accuracy, and cost.
The study presents an adaptive robust control method for the Pendubot subjects to matched and mismatched uncertainty. First, the control task is formatted as a reduced-dimension equality constraint of the system states. To handle the matched and mismatched uncertainties, an orthogonal decomposition method is employed to make the mismatched part disappear after decomposition. Based on the above, an adaptive robust control law based on constraint-following is devised. By the Lyapunov approach, it is rigorously proven that the proposed approach ensures the uniform boundedness and uniform ultimate boundedness of the closed-loop control system and thus renders approximate constraint-following, regardless of uncertainty. Simulation and experimental results are provided and discussed, demonstrating the good performance of the proposed approach.
5 June 2024 in IEEE Transactions on Intelligent Transportation Systems
Agile formation (AF) is a new frontier for intelligent swarm system formation. The AF pertains to perform various tasks in short phases of work and frequent reassessment and adaptation of plans. This greatly increases the applicability of swarm systems. There are however two major challenges for the control design: smooth task transitions and guaranteed collision avoidance. We adopt the constraint-following approach to address these. First, for agile formation, a plateau activation function is proposed to generate a sequence of consecutive and disjoint formations. For collision avoidance, a distance-gauge function is proposed. Second, by taking the objectives of agile formation control and collision avoidance as desirable constraints, the agile formation together with collision avoidance are both cast into a constraint following control problem. Third, to evaluate the constraint-following error, a performance measure $\beta$ is introduced and then an agile formation control is designed to render the $\beta$ -measure to be asymptotically convergent to zero. By this, the swarm system can follow the agile formation constraint and collision avoidance constraint. Therefore, agile formation and collision avoidance are both accomplished.
11 December 2020 in IEEE Transactions on Automatic Control
In this article, we generalize previously reported results for linear, time-invariant, stabilizable multivariable systems described by a strictly proper transfer function matrix $P(s)$ with number of outputs greater than or equal to the number of inputs. By making use of a special kind of a left generalized inverse $P(s)_{\alpha }^{\oplus }$ of $P(s)$ , we define and examine the equivalent relation $\mathcal {R}$ relating $P(s)$ with the members of the equivalence class $[P(s)]_{R}$ of the closed loop-transfer function matrices $P_{C}(s)$ obtainable from $P(s)$ by the use of a proper compensator $C(s)$ in the feedback path. For $\mathcal {R}$ , we establish a set of complete invariants and a canonical form. These results give rise to a simple algorithmic procedure for the computation of proper internally stabilizing and denominator assigning compensators $C(s)$ for the class of plants with $p=m$ and having no zeros in the closed right half complex plane: $\mathbb {C}^{+}$ and in the case when $p>m$ plants characterized by right polynomial matrix fraction descriptions with a polynomial matrix numerator having at least one subset of $m$ rows that give rise to a nonsingular polynomial matrix with no zeros in $\mathbb {C}^{+}$ .
26 September 2025 in IEEE Transactions on Intelligent Transportation Systems
Dyadic control is a new control frontier, which is to address two (often conflicting) objectives simultaneously. We consider rendering both compact formation and collision avoidance in uncertain cooperative road transportation systems. These two tasks, however, present conflicting objectives, where excessive stress on formation tightness may lead to an increased risk of collisions. The tasks are creatively formulated as equality constraints and inequality constraints. Based on the generalized Udwadia-Kalaba (GUK) equation, two independent controllers are developed to handle these constraints, with orthogonality between the control components ensuring no mutual interference. The proposed method guarantees the uniform boundedness and uniform ultimate boundedness of the system, even in the presence of unknown uncertainties. The effectiveness of the control strategy is demonstrated through simulations of a four-vehicle fleet system.