The binding behavior of U(VI) ions onto nano-Kaolin (NK) and nano-Kaolin/MnFe2O4 composite (NK-MF) adsorbents was systematically investigated, focusing on the influence of pH, adsorbent mass, temperature, and contact time. Kinetic analysis, utilizing the pseudo-second-order model, revealed that both NK and NK-MF composites reach their maximum capacity of adsorption (qm) at pH 3. The maximum adsorption capacities were found to be (8.6) mg g−1 for NK and (14.79) mg g−1 for NK-MF at 25C°, indicating a significant enhancement due to the incorporation of MnFe2O4. The adsorption isotherms were examined using Langmuir, Freundlich, and Dubinin-Radushkevich models to characterize the adsorption mechanisms. The Langmuir and Freundlich models provided the best fit (R2 > 0.9), indicating monolayer and multilayer adsorption. Thermodynamics parameters, including enthalpy change (ΔH°), Gibbs free energy change (ΔG°), and entropy change (ΔS°), were derived from adsorption data across different temperatures. The values at 25 °C of ΔH° were (49.67) for NK and (70.97) for NK-MF; ΔG° values were (−5.06) kJ mol−1 for NK and (−7.39) kJ mol−1 for NK-MF; and ΔS° values were 187.36 J (mol·K)−1 for NK and (263.70) J (mol·K)−1 for NK-MF. The results indicate that the adsorption process is endothermic, with conditions that favor adsorption and a positive entropy change. These findings demonstrate the effectiveness and potential of NK and NK-MF composites as viable adsorbents for the uptake of U(VI) ions from water-based solutions. The incorporation of MnFe2O4 into NK improves adsorption capacity, making NK-MF a novel and practical material for uranium removal in environmental applications.
6 January 2025 in Journal of Radioanalytical and Nuclear Chemistry
Activated carbon derived from avocado seeds (AVSAC) was evaluated for its ability to adsorb and desorb Thorium(IV) ions, targeting applications in nuclear waste management and environmental cleanup. Extensive characterization (FTIR, XRD, SEM, TGA/DSC, BET) confirmed structural changes upon Th(IV) uptake; notably, FTIR indicated hydroxyl and aromatic groups participate in binding, while SEM and BET showed significantly reduced porosity and surface area, consistent with effective adsorption. At pH 3.0, a fixed-bed column (0.50 g AVSAC; flow rate 0.25 mL min-1; residence time 4 min mL-1) treated 50 mL of 750 mg L-1 Th(IV), achieving 97.3% removal (36.5 mg captured; 73 mg g-1 working capacity). The adsorption was remarkably fast, sequestering 94% of Th(IV) within five minutes. Kinetic data fit a pseudo-second-order model well, and equilibrium data aligned with the Freundlich isotherm, consistent with PSO behavior on a heterogeneous surface; overall uptake is predominantly physical (thermodynamics/D-R), with localized Th-O coordination contributions. Thermodynamic analysis revealed a spontaneous and endothermic process. Regeneration studies showed that 1.00 M nitric acid could recover 70.5% of the adsorbed thorium. Overall, this work highlights AVSAC as a highly promising, efficient, and regenerable adsorbent for removing Th(IV) from aqueous solutions, offering valuable insights for treating contaminated water streams.
11 November 2025 in Environmental Quality Management
Humin isolated from Ajloun forest Vertisol soil (Jordan) was extracted, purified and comprehensively characterised (elemental analysis, FT-IR, solid-/solution-state 13C-NMR, XRD, TGA, BET and SEM) to evaluate its suitability as a low-cost biosorbent for Pb(II), Cd(II), Cu(II), Ni(II) and Zn(II) removal from aqueous media. The material exhibits a Type III pore network (BET 7.8 m2/g; dominant pores 24–55 Å) enriched in carboxyl- and phenolic-oxygen sites. Batch experiments (pH 4–6; 25–45°C) showed rapid pseudo-second-order uptake with Langmuir capacities up to 59.5 mg/g for Ni(II) and 51.3 mg/g for Pb(II); separation factors (0.037 ≤ RL ≤ 0.503) confirmed favorable sorption. Thermodynamic analysis revealed endothermic, entropy-driven processes (ΔH° 97–736 kJ/mol; ΔS° 0.28–2.43 kJ/mol K), with spontaneous binding of Pb(II) and Cd(II) above pH 5. Fixed-bed tests (1000 mg/L, 1 mL/min) ranked instantaneous uptake Pb > Cu > Zn > Ni > Cd, reflecting hydration-controlled kinetics; >96% of all metals were recovered with 0.1 M HNO3, indicating excellent regenerability. Compared with recent humic and biochar analogues, Ajloun humin offers equal or higher capacities at lower reagent demand, supporting a two-stage, pH- and temperature-tuned workflow for sustainable Mediterranean wastewater treatment.