HECTOR  CARREON

Dr. HECTOR CARREON

orcid

Research Focus & Metrics

Academic Career Length

27Years (2000-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2014 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
HCHECTOR CARREON
HECTOR CARREON
ARAlberto Ruiz
Alberto Ruiz
BSBayron Santoveña
Bayron Santoveña
When the Ti-6Al-4V alloy is over-aged at 500-600°C, nanometer-sized α2 (Ti3Al ) phases can be homogeneously precipitated inside α phases, thereby leading to the additional improvement of mechanical properties. The present study was concerned with the effects of over-aging on thermoelectric power (TEP) measurements in a Ti-6Al-4V alloy. Widmanstätten and equiaxed microstructures containing fine &agr2 (Ti3Al ) particles were obtaining by over-aging a Ti-6Al-4V alloy. Over-aging heat treatments were conducted at 515°C, 545°C and 575°C for different aging times. In order to find out the factors affecting the variation in the TEP, the over-aging samples were examined by optical microscopy (OM) and (SEM) scanning electron microscopy. In particular, we studied the behavior of the physical material property hardness, an important parameter of the Ti-6Al-4V alloy mechanical properties, with respect to the variation in the aging time and temperature. It was found that the TEP measurements reveal an increase in the magnitude of the absolute TEP value of the over-aged Widmanstätten and equiaxed microstructures with regards to the unaged condition for different aging times, with a somewhat higher value at 515°C.

1 December 2000 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
HCHECTOR CARREON
HECTOR CARREON
PNPeter B. Nagy
Peter B. Nagy
ANAdnan H. Nayfeh
Adnan H. Nayfeh
Inclusions and other types of imperfections in metals can be nondestructively detected by noncontacting magnetic measurements that sense the thermoelectric currents around such flaws when the specimen is subjected to directional heating and cooling. This article presents experimental data for the magnetic field produced by thermoelectric currents around surface-breaking spherical tin inclusions in copper under external thermal excitation for different lift-off distances between the sensor and the surface of the specimen. The diameter of the inclusions and the lift-off distance varied from 2.4 to 12.7 mm and from 12 to 20 mm, respectively. A fairly modest 0.7 °C/cm temperature gradient in the specimen produced peak magnetic flux densities ranging from 1 to 250 nT. These results were found to be in good agreement with recently published theoretical predictions [P. B. Nagy and A. H. Nayfeh, J. Appl. Phys. 87, 7481 (2000)].

1 January 2002 in Journal of Applied Physics
Verified
Journal Article
Closed access
ANAdnan H. Nayfeh
Adnan H. Nayfeh
HCHECTOR CARREON
HECTOR CARREON
PNPeter B. Nagy
Peter B. Nagy
Inclusions and other types of imperfections in metals can be nondestructively detected by noncontacting magnetic measurements that sense the thermoelectric currents that appear when the specimen is subjected to directional heating and cooling. The detectability of small imperfections is ultimately limited by the intrinsic thermoelectric anisotropy and inhomogeneity of the material to be inspected. This article presents an analytical method for calculating the magnetic field produced by thermoelectric currents in anisotropic materials under two-dimensional directional heating and cooling. Experimental results from a textured Ti–6Al–4V titanium-alloy plate are shown to be in very good agreement with the predictions of this model. The described analytical method can be used to optimize thermoelectric inspection procedures and to evaluate the macroscopic texture of metals from their characteristic magnetic signatures.

23 September 2009 in Journal of Nondestructive Evaluation
Verified
Journal Article
Closed access
PDF file
ARAlberto Ruiz
Alberto Ruiz
NLNoemí Ortiz Lara
Noemí Ortiz Lara
HCHECTOR CARREON
HECTOR CARREON
CRCarlos Rubio
Carlos Rubio

1 February 2012 in Surface and Coatings Technology
Verified
Journal Article
Closed access
HCHECTOR CARREON
HECTOR CARREON
SBS. Barriuso
S. Barriuso
GBG. Barrera
G. Barrera
JGJ.L. González-Carrasco
J.L. González-Carrasco
Francisca CaballeroFrancisca Caballero
Francisca Caballero

18 August 2015 in Nondestructive Testing and Evaluation
Verified
Journal Article
Closed access
HCHECTOR CARREON
HECTOR CARREON
GBG. Barrera
G. Barrera
CNC. Natividad
C. Natividad
MSM. Salazar
M. Salazar
ACA. Contreras
A. Contreras
In general, the ultrasonic techniques have been used to determine the mechanical properties of materials based on their relationship with metallurgical characteristics. In this research work, the relationship between ultrasonic wave velocity, hardness and the microstructure of steel pipeline welded joints is investigated. Measurements of ultrasonic wave velocity were made as a function of the location across the weld. Hardness measurements were performed in an attempt to correlate with ultrasonic response. In addition, the coarse and dendritic grain structure of the weld material is extreme and unpredictably anisotropic. Thus, due to the acoustic anisotropy of the crystal, weld material of studied joints is anisotropic too. Such structure is no longer direction-independent to the ultrasonic wave propagation; therefore, the ultrasonic beam deflects and redirects and the wave front becomes distorted. Thus, the use of conventional ultrasonic testing techniques using fixed beam angles is very limited and the application of conventional ultrasonic phased array techniques becomes desirable. This technique is proposed to assist pipeline operators in estimating the hardness through ultrasonic measures to evaluate the susceptibility to stress sulphide cracking and hydrogen-induced cracking due to hard spots in steel pipeline welded joints in service. Sound wave velocity and hardness measurements have been carried out on a steel welded joint. For each section of the welding, weld bead, fusion zone, heat affected zone and base metal were found to correspond particular values of the ultrasound velocity. These results were correlated with electron microscopy observations of the microstructure and sectorial scan view of welded joints by ultrasonic phased array.