This study aims to evaluate the emissions of greenhouse gases (GHGs) stemming from the sludge treatment sector in China and to investigate the feasibility of novel technologies in curtailing these emissions, with the aim of fostering sustainable sludge management methodologies. Employing a life-cycle assessment (LCA) methodology, the research computed the comprehensive GHG emissions resulting from sludge treatment, taking into consideration diverse elements such as treatment techniques (e.g., landfills, incineration, and land application) and the geographical variations among China’s 660 municipalities. Findings indicate that the total amount of GHG emissions from sludge treatment amounted to 18.54 Mt CO₂-eq in 2017, with incineration registering the highest emissions (10,011.53 kg CO₂-eq/t dry sludge (DS)), followed by landfills (717.51 kg CO₂-eq/t DS) and land application (276.41 kg CO₂-eq/t DS). The geographical dispersion of emissions characteristics reveal notable regional disparities, with the top 1% of cities responsible for 34.2% of the overall emissions. The concentration of emissions in the top 1 percent of cities underscores the necessity for tailored mitigation measures that consider localized sustainable development challenges. Principal component analysis (PCA) demonstrates that economic determinants and treatment scales exert substantial influence on emissions, underscoring the imperative of aligning Sustainable Development Goals (SDGs) with economic advancement. To curtail the carbon footprint associated with sludge treatment and enhance sustainability, the study evaluated the emission mitigation potential and expenses of diverse technologies, encompassing thermal conversion, anaerobic digestion, hydrothermal treatment, and wet oxidation. These technologies have the capacity to slash GHG emissions by 0.09–0.46 t CO₂-eq/t DS in comparison to traditional approaches, while concurrently advancing resource recuperation and principles of circular economy. For instance, gasification could diminish GHG emissions by 0.33–0.46 t CO₂-eq/t DS, whereas anaerobic digestion could yield reductions of 0.09–0.30 t CO₂-eq/t DS. The implementation of these innovative technologies across 660 Chinese municipalities could potentially curtail total GHG emissions from sludge treatment by 15–40%. Nevertheless, further enhancements are imperative to refine their environmental and economic efficiency and guarantee enduring sustainability. By deploying these technologies and embracing optimization tactics, China’s sludge treatment sector can make a substantial contribution towards attaining national carbon neutrality objectives and advancing sustainable development.

In this study, the effects of pH on slurrying properties of petroleum coke water slurry (PCWS) were investigated. The slurrying concentration, rheological characteristics and stability of PCWS were studied with four different types of additives at pH varying from 5 to 11. The results showed that the slurrying concentration, rheological characteristics and stability of PCWS all increased at first and then decreased with increasing pH from 5 to 11, and a pH of around 9 was found to be the most favorable acid–alkali environment to all these three slurrying properties. It was also indicated that only in a moderate alkaline environment can the additives be active enough to react with particle surfaces sufficiently to obtain good slurrying concentration and form a stable three-dimensional network structure, which can support strong pseudoplastic characteristics and good stability. An acid environment was a very unfavorable factor to the slurrying properties of PCWS.

Defect engineering in semiconductor heterojunctions offers a promising route for enhancing the selectivity of photocatalytic CO₂ conversion. In this work, a ZnS/gel-derived TiO₂ photocatalyst featuring sulfur vacancies introduced via hydrazine hydrate (N₂H₄) treatment is developed. XRD, HRTEM, and XPS analyses confirm the formation of a crystalline heterointerface and a defect-rich ZnS surface, enabling effective interfacial electronic modulation. The optimized ZnS/gel-derived TiO₂-0.48 composite achieves CH₄ and CO yields of 6.76 and 14.47 μmol·g⁻¹·h⁻¹, respectively, with a CH₄ selectivity of 31.8% and an electron selectivity of 65.1%, clearly outperforming pristine TiO₂ and the corresponding single-component catalysts under identical conditions. Photoluminescence quenching, enhanced photocurrent response, and reduced charge-transfer resistance indicate significantly improved interfacial charge separation. Mott–Schottky analysis combined with optical bandgap measurements reveals pronounced interfacial charge redistribution in the composite system. Considering the intrinsic band structure of ZnS and gel-derived TiO₂, a Z-scheme-compatible interfacial charge migration model is proposed, in which photogenerated electrons with strong reductive power are preferentially retained on ZnS, while holes with strong oxidative capability remain on gel-derived TiO₂. This charge migration pathway preserves high redox potentials, facilitating multi-electron CO₂ methanation and water oxidation. Density functional theory calculations further demonstrate that sulfur vacancies stabilize *COOH and *CO intermediates and reduce the energy barrier for *COOH formation from +0.51 eV to +0.21 eV, thereby promoting CO₂ activation and CH₄ formation. These results reveal that sulfur vacancies not only activate CO₂ molecules but also regulate interfacial charge migration behavior. This work provides a synergistic strategy combining defect engineering and interfacial electronic modulation to enhance selectivity and mechanistic understanding in CO₂-to-CH₄ photoconversion.

This study aims to quantify greenhouse gas (GHG) emissions from China's sludge treatment industry and explore the potential of novel technologies to mitigate these emissions, promoting sustainable sludge management practices. Using a life cycle assessment approach, the total GHG emissions from sludge treatment in 2017 were estimated at 18.54 Mt CO2-eq, with significant regional variations. Incineration contributed the highest emissions (1,011.53 kg CO2-eq/t dry sludge), followed by landfill (717.51 kg CO2-eq/t) and land application (276.41 kg CO2-eq/t). The uneven distribution of emissions across cities highlights the need for targeted mitigation strategies that consider local sustainability challenges. Principal component analysis revealed that economic factors and treatment scale significantly influence emissions, emphasizing the importance of integrating sustainability goals with economic development. To reduce the carbon footprint of sludge treatment and enhance sustainability, the mitigation potential and costs of various technologies were evaluated, including thermal conversion, anaerobic digestion, hydrothermal processes, and wet oxidation. These technologies offer GHG emission reductions ranging from 0.09 to 0.46 t CO2-eq/t dry solids compared to conventional methods, while also promoting resource recovery and circular economy principles. However, further optimization is necessary to enhance their environmental and economic performance, ensuring long-term sustainability. By implementing these technologies and adopting optimization strategies, China's sludge treatment industry can significantly contribute to achieving the country's carbon neutrality goal and fostering sustainable development.

To make sure the effects of operation parameters on rheological properties of bubble petroleum coke water slurry, orthogonal experiments and range analysis were done. The results show that the optimal operation condition for pseudoplastic characteristics was the combination of frother dosage of 0.045 wt% of the air-dried pulverized petroleum coke, aeration time of 30 min, aperture size of air distribution plate of 2–5 μm, solid concentration of 68 wt%, and frother AOS, on which the flow characteristic exponent was around 0.6, indicating a perfect pseudoplastic. The major factors affecting rheological properties were frother dosage and aeration time.

The effects of five main ingredients (i.e. SiO₂, Al₂O₃, Fe₂O₃, CaO and MgO) of coal ash on the stability of petroleum coke water slurry (PCWS) were investigated in this paper. The results showed that the stability of PCWS could be improved tremendously by the appearance of a small quantity of CaO in the PCWS, while the other 4 ashes had little impact. When the apparent viscosity was 1000 mPa·s, the PCWS with CaO dosage of 0.3 wt% would possess the solid concentration of 68.0%, the flow characteristic exponent of 0.78, and the water separation rate of 3.4%.