A vehicular antenna with diverse radiation patterns is proposed for both the dedicated short range communications (DSRC) and the fifth-generation (5 G) millimeter-wave (MMW) communications. The proposed antenna mainly comprised a 2×2 MMW subarray, an 8-element DSRC subarray and a corresponding 5-port feeding network. The radiating patches of the MMW subarray are excited by two pairs of coaxial-to-substrate integrated waveguide (SIW) transition (CST) feeding networks that are comprised of two 3-dB couplers, two 90 $^{\circ }$ -phase shifters, and four power dividers (PDs), which provide in-phase and differential-phase output signals to achieve single-beam and conical-beam radiation patterns. On the other hand, the 8 monopoles of the DSRC subarray arranged around the aforementioned MMW radiator are excited by a coaxial-to-SIW-to- coaxial transition (CSCT) feeding network that includes a 1-to-4 SIW PD and four 1-to-2 microstrip PDs to form an omni-directional radiation and achieve a large frequency ratio (LFR). Measured results indicate that wide bandwidths of 15.44% (24.14-28.18 GHz), 16.09% (24.29-28.54 GHz), 15.01% (23.85-27.72 GHz), and 14.29% (24.05-27.75 GHz) with corresponding high peak gains of 10.97 $\pm$ 1.03 dBi, 11.71 $\pm$ 1.32 dBi, 10.84 $\pm$ 1.00 dBi, and 11.29 $\pm$ 1.28 dBi are obtained by the four MMW subarray ports, while a bandwidth of 11.40% (5.46-6.12 GHz) with an azimuth-plane gain of 0.64 dBi and a peak gain of 4.29 $\pm$ 0.19 dBi for the DSRC subarray port are also obtained. Besides, low cross-polarization (X-pol) levels of -24 dB and -27 dB are achieved for the two subarrays, respectively.
In the context of land scarcity and high-density urban areas, the adaptive reuse of abandoned historical industrial buildings plays a critical role in achieving sustainable development goals. This study proposes a sustainability assessment framework for the adaptive reuse of industrial buildings as exhibition spaces within the context of high-density urban development, addressing multiple dimensions of sustainability, including the building’s physical structure, economic factors, environmental impact, social considerations, and governance. The framework consists of 55 design indexes, categorized into 15 subcategories and 5 main categories. We conducted a survey of experts with experience in high-density urban renewal design and implemented a weighting analysis to identify priority intervention measures for industrial building redevelopment in the era of urban stock. Finally, a fuzzy comprehensive evaluation was carried out on ten cases in Shenzhen where industrial buildings were converted into exhibition spaces over the past 12 years. The findings reveal the following: (1) “Reuse of old architectural spaces” is the most critical category to prioritize, and, at the indicator level, “adaptability and efficiency of building reuse”, “public participation in the renewal process”, “cooperative operation structures”, and “planning vision” are identified as the four key influencing factors. (2) The functional layout, historical value, and richness of public amenities in the transformed industrial buildings have a significant positive impact on the evaluation results, while the building’s construction time and floor area do not significantly affect public post-evaluation. (3) Younger and more highly educated groups tend to view the transformed exhibition spaces as tourist attractions, particularly expressing satisfaction with the repurposing of the Kinwei Brewery and OCAT B10 New Hall, and consider the adaptive reuse of industrial buildings to promote sustainable urban renewal (SUR). This study provides concrete policy recommendations and practical guidance for the adaptive reuse of both new and existing industrial buildings, contributing to the creation of sustainable urban environments.
A dual-polarized (DP) wideband parabolic reflector antenna with high aperture efficiency and low sidelobe level is proposed for L/S-band vehicular satellite communications. Initially, a pair of cross-arranged dipoles with etching slots and parasitic branches are utilized to achieve wideband characteristic. Subsequently, a top-loaded parasitic beautified substrate, featuring four pairs of rectangular rings arranged around a flower-shaped radiation patch, is employed to prevent the radiation pattern from splitting into two pieces. Finally, by integrating with a parabolic reflector etched with wind-resistance-reduction holes, a parabolic reflector antenna with sidelobe level suppression and stable high aperture efficiency is constructed. Throughout the design process, the principles of wideband operation and low sidelobe levels are analyzed. Measured results exhibit good electrical performance, including a wide bandwidth of 78.57%(1.7-3.9 GHz), a high gain of 21.75±2.25 dBi, a peak aperture efficiency of up to 73%, a high isolation level of better than 20 dB, and a low sidelobe level of less than -22 dB. These characteristics make the proposed antenna suitable for wideband and anti-interference vehicular satellite communications.
This paper presents a dual-polarized, multi-wideband ceiling antenna with an eight-diagram shape for indoor communication in the 2G/3G/LTE/5G sub-6 GHz frequency range. The horizontally polarized (HP) antenna element consists of an upper frequency eight-diagram shaped radiation element and a lower frequency ring-shaped dipole radiation array, both are printed on one side of a printed-circuit-board (PCB). These elements are fed by a pair of different 1-to-4 power divider (PD) networks on the other side of the PCB. The HP antenna elements are connected by a wideband diplexer and fixed by four nylon columns, ensuring wide bandwidth and good isolation. Additionally, the vertically-polarized (VP) antenna element is positioned at the center of the lower-frequency HP dipole radiation array and consists of two orthogonal conical patches with an open groove. This configuration allows for wide frequency bandwidth, high gain, and aesthetic characteristics. Measurement results demonstrate a wide impedance bandwidth of 114.3% (1.5-5.5 GHz) in the VP direction, as well as two bandwidths of 78.6% (1.66-3.81 GHz) and 8.5% (4.75-5.17 GHz) in the HP direction for the 2G/3G/LTE/5G sub-6 GHz bands. The corresponding peak gains vary within 1.06-6.09 dBi and 3.65-4.95 dBi, respectively. Furthermore, the port isolation level between the HP and VP elements reaches 25 dB, demonstrating satisfactory performance for practical ceiling applications.
In this paper, a vehicular dual-band reflectarray antenna (RA) designed for sub-terahertz (sub-THz) communication systems is proposed, offering switchable single-beam and asymmetrical dual-beam deflection. The antenna unit cell (UC) adopts a center-edge dual-band configuration, fabricated on a three-layer stacked substrate with varying thicknesses and dielectric constants. This configuration ensures superior reflection amplitude and facilitates a phase shift exceeding 360°. A RA consisting of the proposed 21×21 UCs is developed by integrating a tailored phase compensation equation. Experimental results show that under X-polarized excitation, the RA achieves a single-beam deflection of +20° with a peak gain of 19.1 dBi in the lower frequency band (145-155 GHz, 6.7% bandwidth). Furthermore, an asymmetrical dual-beam deflection at +20° and -10° with a gain of 16.8 dBi is realized in the same band. Under Y-polarized excitation, the RA demonstrates a -10° single-beam deflection with a high gain of 22.5 dBi in the upper frequency band (165-180 GHz, 10% bandwidth). With its dual-band reconfigurable beam-steering capability, the proposed RA is ideal for dynamic, high-performance vehicular sub-THz communication applications.