Understanding granular mass flow is a basic step in the prediction and control of natural or man‐made disasters related to avalanches on the Earth. Savage and Hutter (1989) pioneered the mathematical modeling of these geophysical flows introducing Saint‐Venant‐type mass and momentum depth‐averaged hydrostatic equations using the continuum mechanics approach. However, Denlinger and Iverson (2004) found that vertical accelerations in granular mass flows are of the same order as the gravity acceleration, requiring the consideration of nonhydrostatic modeling of granular mass flows. Although free surface water flow simulations based on nonhydrostatic depth‐averaged models are commonly used since the works of Boussinesq (1872, 1877), they have not yet been applied to the modeling of debris flow. Can granular mass flow be described by Boussinesq‐type gravity waves? This is a fundamental question to which an answer is required, given the potential to expand the successful Boussinesq‐type water theory to granular flow over 3‐D terrain. This issue is explored in this work by generalizing the basic Boussinesq‐type theory used in civil and coastal engineering for more than a century to an arbitrary granular mass flow using the continuum mechanics approach. Using simple test cases, it is demonstrated that the above question can be answered in the affirmative way, thereby opening a new framework for the physical and mathematical modeling of granular mass flow in geophysics, whereby the effect of vertical motion is mathematically included without the need of ad hoc assumptions.
Modeling of dam break flows is frequently required in civil and environmental engineering because of the risk associated with this catastrophic flow. Typically, model predictions are conducted using the Saint-Venant hydrostatic theory, which can lead to unrealistic predictions. The prediction of the amplitude of nonhydrostatic waves generated during dam break flows is an important engineering problem given the risk of overtopping of flow in manmade canals or the increasing of flooding areas in natural watercourses. The weakly nondispersive and fully nonlinear Serre equations are a suitable choice for modeling these flows, but there is a lack of a systematic assessment of this system of equations for dam break flow modeling reported in the literature. In this paper, the Serre equations are applied to dam break flows over horizontal rigid bottoms, whereas in the second part of this research, the nonhydrostatic dam break waves over erodible beds are considered. Here, a high resolution finite volume m...
16 January 2018 in International Journal for Numerical Methods in Fluids
Characteristics of turbulent length scales and anisotropy in different regions of a submerged turbulent plane offset jet are analyzed. The manifestation of the preattachment, impingement, and wall jet regions, including the outer and inner layers of the jet, recirculatory bubble, and circulatory flow zones are demonstrated by the velocity vector diagram. The results of the turbulent length scales (the Taylor microscale and the Kolmogorov length scale) show that the jet layer is characterized by a reduction in the length scales as compared with the recirculatory bubble and circulatory flow zones. To analyze the turbulence anisotropy, at first, the terminologies used for the axisymmetric limits of the Lumley triangle based on the Reynolds stress tensor are revisited and explained through an improved conceptual illustration. In the Reynolds stress anisotropy analysis, the anisotropic invariant maps formed by the data plots suggest that in the preattachment region, starting from the wall, the anisotropy tends to reduce toward the three-dimensional isotropy along the left-curved boundary of the Lumley triangle up to the half-depth of the recirculatory bubble zone. Then, the data plots take a turn toward the left vertex of the triangle with a further increase in vertical distance up to the inner separation line of the offset jet, exhibiting an affinity toward the two-dimensional isotropy. Within the jet layer, the data plots form a looping trend. By contrast, in the circulatory flow zone, the data plots belong close to the left-curved boundary of the Lumley triangle, moving slightly toward the left vertex of the triangle.