Jian Rong

Dr. Jian Rong


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 August 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
YZYongqi Zhang
Yongqi Zhang
Wei WangWei Wang
Wei Wang
Jian TangJian Tang
Jian Tang
JRJian Rong
Jian Rong
Accurate temperature control across different zones during the combustion and heat exchange stages is crucial for both the economic efficiency of municipal solid waste incineration (MSWI) power plants and the consistent achievement of environmental targets. To address limitations in existing research, such as single-point temperature prediction models and the difficulty in characterizing the correlation mapping between adjacent zones, this article proposes a multi-point serial temperature prediction modeling method for the combustion and heat exchange stages of the MSWI process. Firstly, based on identifying five key temperature points across different zones in these stages, the Pearson correlation coefficient (PCC) is utilized for regional feature selection targeting each individual temperature point. Subsequently, multiple single temperature point prediction models based on a linear regression decision tree (LRDT) are constructed using the selected feature variables. Finally, considering the mutual influence between temperatures in neighboring zones, a serial multi-point temperature prediction model is built by using the knowledge transfer. To our knowledge, this is the first interpretable multi-point temperature prediction model for the MSWI process. It can assist in precise temperature control across different zones during the combustion and heat exchange stages in future studies. Validation results demonstrate that the minimum MSE attained 0.0238, the minimum MAE reached 0.1223, and the maximum R2 achieved 0.9985 across multiple temperature points. The proposed method is validated using actual operational data from an MSWI power plant in Beijing.

4 October 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
Jian TangJian Tang
Jian Tang
XYXiaoxian Yang
Xiaoxian Yang
Wei WangWei Wang
Wei Wang
JRJian Rong
Jian Rong
Municipal solid waste (MSW) refers to solid and semi-solid waste generated during human production and daily activities. The process of incinerating such waste, known as municipal solid waste incineration (MSWI), serves as a critical method for reducing waste volume and recovering resources. Automatic online recognition of flame combustion status during MSWI is a key technical approach to ensuring system stability, addressing issues such as high pollution emissions, severe equipment wear, and low operational efficiency. However, when manually selecting optimized features and hyperparameters based on empirical experience, the MSWI flame combustion state recognition model suffers from high time consumption, strong dependency on expertise, and difficulty in adaptively obtaining optimal solutions. To address these challenges, this article proposes a method for constructing a flame combustion state recognition model optimized based on reinforcement learning (RL), long short-term memory (LSTM), and parallel differential evolution (PDE) algorithms, achieving collaborative optimization of deep features and model hyperparameters. First, the feature selection and hyperparameter optimization problem of the ViT-IDFC combustion state recognition model is transformed into an encoding design and optimization problem for the PDE algorithm. Then, the mutation and selection factors of the PDE algorithm are used as modeling inputs for LSTM, which predicts the optimal hyperparameters based on PDE outputs. Next, during the PDE-based optimization of the ViT-IDFC model, a policy gradient reinforcement learning method is applied to determine the parameters of the LSTM model. Finally, the optimized combustion state recognition model is obtained by identifying the feature selection parameters and hyperparameters of the ViT-IDFC model. Test results based on an industrial image dataset demonstrate that the proposed optimization algorithm improves the recognition performance of both left and right grate recognition models, with the left grate achieving a 0.51% increase in recognition accuracy and the right grate a 0.74% increase.

25 November 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
YWYicong Wu
Yicong Wu
Wei WangWei Wang
Wei Wang
Jian TangJian Tang
Jian Tang
ZLZenan Li
Zenan Li
JRJian Rong
Jian Rong
In the global trend towards a sustainable circular economy, incineration technology is widely used for the treatment of municipal solid waste (MSW), as it effectively achieves waste harmlessness, reduction, and energy recovery. During the MSW incineration (MSWI) process, the furnace temperature (FT) is closely linked to pollutant emission concentrations. Therefore, precise control and stable monitoring of the FT are essential for minimizing pollution emissions. However, existing studies generally treat the optimization of FT setpoint value and tracking control as separate issues, lacking a unified optimization framework that can link environmental objectives with control parameters in an online, automatic, and closed-loop manner. To address these issues, a dual-layer optimization control method for FT setting and tracking, aimed at minimizing pollutant concentrations, is proposed. In the first layer, the optimization targets the lowest possible NOx and CO2 emission concentrations, using a genetic algorithm (GA) to determine optimal FT setpoints. In the second layer, the optimization minimizes the Integral of Time-weighted Absolute Error (ITAE) as the performance index, optimizing the parameters of multi-loop PID controllers via an improved GA. Additionally, an innovative shared-memory judgment mechanism is proposed to transmit process data in real time. Based on residual dynamic correction of the optimization function, an effective double-loop closed control architecture is established. Experimental validation shows that, compared to traditional methods, the optimized control system exhibits faster setpoint value tracking, smaller steady-state errors, and stronger anti-interference capabilities, leading to a significant reduction in pollutant emissions. This study provides a new approach for intelligent optimization control in MSWI with substantial application prospects.

23 September 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BWBokang Wang
Bokang Wang
Jian TangJian Tang
Jian Tang
Wei WangWei Wang
Wei Wang
JRJian Rong
Jian Rong
Municipal solid waste incineration (MSWI) plays a key role in advancing environmental sustainability. However, the current main furnace temperature control methods are difficult to solve the problems of strong coupling, equipment wear, and frequent disturbances. To solve the above problems, in this article, we propose a static and dynamic hybrid event-triggering mechanism-based interval type-II fuzzy broad adaptive compensation model predictive control (SDHETM-IT2FB-ACMPC). Firstly, a furnace temperature prediction model based on the interval type-2 fuzzy broad learning system (IT2FBLS) is constructed, and the IT2FB-MPC method is obtained, which solve the problem of variable coupling. Secondly, DETM based on historical error information is designed using sliding window method and combined with SETM to form SDHETM to drive the update of control variable to reduce the problem of equipment wear. Finally, the adaptive compensation control law of the adaptive compensation optimization control (ACOC) algorithm can compensate for the influence of the disturbance and the event-triggered mechanism on the control effect, and overcome the problem of frequent disturbances. Experimental results show that the proposed method reduces ISE to 0.2821, IAE to 0.1930, and DEVmax to 6.6269—reductions of 79%, 59%, and 8% compared to traditional NMPC—while cutting control actions by 71%. The results prove that IT2FB-MPC has excellent control performance for furnace temperature, and that SDHETM and ACOC can effectively reduce the triggering times and effectively compensate for the influence caused by disturbances and the lack of control variable updates. The proposed method successfully solves the control difficulties of furnace temperature in the MSWI process.

24 October 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
ZLZenan Li
Zenan Li
Wei WangWei Wang
Wei Wang
Jian TangJian Tang
Jian Tang
YWYicong Wu
Yicong Wu
JRJian Rong
Jian Rong
Effective management of municipal solid waste is crucial for achieving sustainable development and maintaining a healthy ecological environment. Municipal solid waste incineration (MSWI) processes are highly nonlinear and exhibit strong coupling characteristics, which makes long-term stable control challenging. Accurate prediction of the various toxic and harmful acidic gases that will be generated during this process is crucial for supporting optimization and control research. This study proposes a predictive model for acidic gases using Random Forest (RF) and Inverted Transformer (ITransformer). First, the RF algorithm is used to identify feature variables that strongly correlate with the target variables, thereby facilitating the shared feature selection process for multiple acidic gases. These selected features are then fed into a multi-output ITransformer model, which predicts the target variables and generates multiple evaluation metrics. Finally, the model’s hyperparameters are optimized based on these metrics and the threshold ranges of the acidic gases. The experimental results using real data from a specific incineration plant show that 13 features remain after the shared feature selection process. Compared to other models, the proposed approach uses the fewest shared features while reducing computational costs. Moreover, the R2 values for NOx, SO2, and HCl are 0.9791, 0.9793, and 0.9838, respectively.