This article presents the design, construction, and evaluation of an easy-to-build textile pressure resistive sensor created from low-cost conventional anti-static sheets and conductive woven fabrics. The sensor can be built quickly using standard household tools, and its thinness makes it especially suitable for wearable applications. Five sensors constructed under such conditions were evaluated, presenting a stable and linear characteristic in the range 1 to 70 kPa. The linear response was modeled and fitted for each sensor individually for comparison purposes, confirming a low variability due to the simple manufacturing process. Besides, the recovery times of the sensors were measured for pressures in the linear range, observing, for example, an average time of 1 s between the moment in which a pressure of 8 kPa was no longer applied, and the resistance variation at the 90% of its nominal value. Finally, we evaluated the proposed sensor design on a classroom application consisting of a smart glove that measured the pressure applied by each finger. From the evaluated characteristics, we concluded that the proposed design is suitable for didactic, healthcare and lifestyle applications in which the sensing of pressure variations, e.g., for activity assessment, is more valuable than accurate pressure sensing.

Multi-band elastic optical networks are a promising alternative to meet the bandwidth demand of the ever-growing Internet traffic. In this letter, we propose a family of band allocation algorithms for multi-band elastic optical networks. Employing simulation, we evaluate the blocking performance of 3 algorithms of such a family and compare their performance with the only heuristic proposed to date. Results show that the three new algorithms outperform the previous proposal, with up to one order of magnitude improvement. We expect these results to help advance the area of dynamic resource allocation in multi-band elastic optical networks.

This article presents a parametric study of a fully 3D-printed hemispherical dielectric resonator antenna (DRA) using low loss dielectric filament and high-conductive filaments jointly with a low-cost customized dual-extruding 3D printer. The parametric study consisted in the design and evaluation of five different hemispherical DRA topologies with different internal shapes and the same overall size, in which the printing infill percentage of the DRA was reduced. A 3D-printed metallic cap was included in the antenna to compensate for the resonant frequency shift in order to maintain its original dimensions. Measurement results show that all evaluated antennas kept the same resonant frequencies and similar radiation patterns while reducing the overall weight of the topology in 22% of the nominal weight.

A deep reinforcement learning (DRL) approach is applied, for the first time, to solve the routing, modulation, spectrum, and core allocation (RMSCA) problem in dynamic multicore fiber elastic optical networks (MCF-EONs). To do so, a new environment was designed and implemented to emulate the operation of MCF-EONs - taking into account the modulation format-dependent reach and intercore crosstalk (XT) - and four DRL agents were trained to solve the RMSCA problem. The blocking performance of the trained agents was compared through simulation to 3 baselines RMSCA heuristics. Results obtained for the NSFNet and COST239 network topologies under different traffic loads show that the best-performing agent achieves, on average, up to a four-times decrease in blocking probability with respect to the best-performing baseline heuristic method.

Wide-area optical networks face significant transmission challenges due to the relentless growth of bandwidth demands experienced nowadays. Network operators must consider the relationship between modulation format and maximum reach for each connection request due to the accumulation of physical layer impairments in optical fiber links, to guarantee a minimum quality of service (QoS) and quality of transmission (QoT) to all connection requests. In this work, we present a BER-adaptive solution to solve the routing, modulation format, and spectrum assignment (RMLSA) problem for wide-area elastic optical networks. Our main goal is to maximize successful connection requests in wide-area networks while choosing modulation formats with the highest efficiency possible. Consequently, our technique uses an adaptive bit-error-rate (BER) threshold to achieve communication with the best QoT in the most efficient manner, using the strictest BER value and the modulation format with the smallest bandwidth possible. Additionally, the proposed algorithm relies on 3R regeneration devices to enable long-distances communications if transparent communication cannot be achieved. We assessed our method through simulations for various network conditions, such as the number of regenerators per node, traffic load per user, and BER threshold values. In a scenario without regenerators, the BER-Adaptive algorithm performs similarly to the most relaxed fixed BER threshold studied in blocking probability. However, it ensures a higher QoT to most of the connection requests. The proposed algorithm thrives with the use of regenerators, showing the best performance among the studied solutions, enabling long-distance communications with a high QoT and low blocking probability.

The lack of standards in the performance evaluation of new resource allocation algorithms in multicore fiber elastic optical networks (MCF-EONs) compromises the fairness when comparing them with the state of the art. This paper reviews the different transmission parameters, network parameters, performance metrics, and baselines used by the recent proposals to build a framework for future benchmarking of such algorithms according to the nature of the network operation, whether static or dynamic. This framework aims to provide standards regarding evaluation criteria, scenarios, and performance metrics, as well as recommendations concerning technology advances to promote methodology and reproducibility in further related studies.