To enhance light harvesting in organic photovoltaic devices, we propose the incorporation of a metal (aluminum) mask film in the system’s usual layout. We fabricate devices in a sandwich geometry, where the mask (nanoindented with a periodic array of holes of sizes and spacing ) is added between the transparent electrode and the active layer formed by a blend of the semiconducting polymer P3HT and substituted fullerene. Its function is to promote trapping of the incident light into the device’s cavity (the region corresponding to the active layer). For , we set a value that allows light diffraction through the holes in the relevant absorption range of the polymer. To optimize the mask structure, we consider a very simple model to determine the leading to trapped fields that are relatively intense and homogeneous within the device. From measurements of the action spectra, we show that, indeed, such architecture can considerably improve the resulting photocurrent efficiencies—one order of magnitude in the best situation studied.
This study compiled a dataset of published works relating to fatigue testing in asphalt mixes, covering 2020–2025. The dataset was subjected to bibliometric and textual analyses, including a systematic review, to explore emerging trends and patterns in experimental protocols. Bibliometrix, VOSviewer, and IRaMuTeQ were employed to map the scientific landscape of 368 articles. Following PRISMA guidelines, the 100 most-cited articles were reviewed to identify prevailing test setups and parameters. The results showed a growing scientific production (9.1% per year), concentrated in a few high-impact journals and dominated by China, with emphasis on sustainability. A comparison between scientific output and a road quality index revealed a disconnect between academic research and field implementation. Five thematic clusters emerged: sustainable pavement management, mechanical characterization, binder modification, performance modeling, and evaluation of innovative materials. Indirect tensile and four-point bending tests were the most common loading modes. Considerable variability in protocols, frequent omissions of methodological details, and limited statistical treatment were also observed. The study highlighted the importance of standardized reporting and robust analysis, offering a reproducible framework to understand fatigue behavior and support future research.
The principal phase of hardened Portland cement pastes is calcium silicate hydrate (C-S-H), which influences the physical and mechanical properties of construction materials. In this work, calcium silicate hydrate (C-S-H) was synthesized, with the addition of poly-methacrylic acid with sodium (PMA), for the development of C-S-H/ polymer nanocomposites. Among the polymers available, PMA is indicated in the literature as one of those viable for producing C-S-H/polymer complexes. However, no consensus exists regarding the type of interaction this produces. The resulting compounds were characterized by XRD, FT-IR, TGA, carbon content (CHN), TEM, SEM and elastic modulus and hardness were measured by instrumented indentation. A significant change was verified in the nanomechanical properties of C-S-H with PMA, resulting in reduction in the elastic modulus and hardness. The set of results presented do not confirm the intercalation of PMA in the interlayer space of C-S-H, but presented evidence of the potential for intercalation, since changes in the microstructure clearly occurred.
1 January 2021 in Anais da Academia Brasileira de Ciências
This manuscript evaluates the technical feasibility of reusing coal ash in the formulation design of dense asphalt mixes. Physicochemical and mineralogical properties of fly and bottom ash matrixes prepared with coal ash were analyzed by scanning electron microscopy (SEM), X-Ray diffraction (XRD), semi-quantitative spectrometry by X-Ray fluorescence (XRF) and surface characterization by Nitrogen (N2) adsorption. Filler fractions under 0.075 mm with 6.0% in weight from an entirely gneissic aggregate gradation curve taken as reference were compared to identical mixes prepared with fly and bottom ashes individually and also to a combined sample with 3.0% of each ash type. Tests on compaction ability with gyratory shear press, resistance to action of water and to rutting were carried out to compare mechanical performance. The results indicate that both gneissic and coal ash fillers do not form dipoles of effective electric attractions to bituminous matrixes, resulting in inert and hydrophilic behavior regarding to action of water, respectively. Despite surface and morphologic characteristics underlying the mechanical performance of gneissic fillers, coal ash matrixes have shown, in general, good technical feasibility to be used in asphalt mixes.