Zinc oxide (ZnO) is a promising material for nitrogen dioxide (NO₂) gas sensors because of its nontoxicity, low cost, and small size. We fabricated one-dimensional (1D) and zero-dimensional (0D) convergence gas sensors activated via ultraviolet (UV) photonic energy to sense NO₂ gas at room temperature. One-dimensional ZnO nanorod (ZNR)-based and ZnO nanotube (ZNT)-based gas sensors were synthesized using a simple hydrothermal method. All the sensors were tested under UV irradiation (365 nm) so that they could be operated at room temperature rather than a high temperature. In addition, we decorated 0D Pt nanoparticles (NPs) on the gas sensors to further improve their sensing responsivity. The NO₂-sensing response of the ZNT/Pt NP convergence gas sensor was 2.93 times higher than that of the ZNR gas sensor. We demonstrated the complex effects of UV radiation on 1D ZnO nanostructures and 0D metal nanostructures in NO₂ gas sensing.

Room-temperature (RT) gas sensors for nitrogen dioxide (NO₂) detection face persistent challenges, including reliance on high operating temperatures and inefficient charge carrier utilization under UV activation. To address these limitations, we engineered a p-n nano-heterojunction (NHJ) gas sensor by integrating p-type nickel oxide (NiO) nanoparticles onto n-type zinc oxide (ZnO) nanorods. This architecture leverages UV-driven carrier generation and interfacial electric fields at the NHJ to suppress recombination, enabling unprecedented RT performance. By optimizing thermal annealing conditions, we achieved a well-defined heterojunction with uniform NiO distribution on the top of the ZnO nanorods, validated through electron microscopy and X-ray photoelectron spectroscopy. The resulting sensor exhibits a 5.4-fold higher normalized response to 50 ppm NO₂ under 365 nm UV illumination compared to pristine ZnO, alongside rapid recovery and stable cyclability. The synergistic combination of UV-assisted carrier generation and heterojunction-driven interfacial modulation offers a promising direction for next-generation RT gas sensors aimed at environmental monitoring.