Advances in the miniaturization, computational capabilities, and cost reduction of semiconductor technology have made global navigation satellite systems (GNSSs) the favorite choice for positioning. Currently, positioning is a key factor for many essential tasks in our modern society and will become even more important with the advent of new concepts such as the Internet of Things (IoT), smart cities and autonomous driving. The extensive use of GNSSs in a wide range of applications has caused their migration from the professional segment to the mass-market segment in terms of both technology and performance. This presents new and more stringent requirements in terms of accuracy, robustness, ubiquity, and continuity for the original “open sky” GNSS design. GNSS technology has experienced an unprecedented evolution in the last decade, and it is expected to exponentially evolve in the next decade. This evolution is considered in this paper with the aim of providing a unified reference for current GNSS receiver technologies and solutions and its expected evolution in the next decade. We consider receiver concepts, antennae, RF front ends, digital signal processing, and positioning algorithms. The impacts on the different GNSS market segments and applications are also analyzed.
24 January 2024 in NAVIGATION: Journal of the Institute of Navigation
Taking the work conducted by the global navigation satellite system (GNSS) software-defined radio (SDR) working group during the last decade as a seed, this contribution summarizes, for the first time, the history of GNSS SDR development. This report highlights selected SDR implementations and achievements that are available to the public or that influenced the general development of SDR. Aspects related to the standardization process of intermediate-frequency sample data and metadata are discussed, and an update of the Institute of Navigation SDR Standard is proposed. This work focuses on GNSS SDR implementations in general-purpose processors and leaves aside developments conducted on field programmable gate array and application-specific integrated circuit platforms. Data collection systems (i.e., front-ends) have always been of paramount importance for GNSS SDRs and are thus partly covered in this work. This report represents the knowledge of the authors but is not meant as a complete description of SDR history.
In this paper we describe the integration done between GNSS-RTK/INS/LiDAR in a loosely coupled Kalman Filter in the context of autonomous driving applications. Specifically, we focus in the assessment of potential LiDAR updates by comparing the velocity profile obtained by the GNSS/INS integration solution and the LiDAR observations. The results from a test drive are shown to provide an insight of the advantages of using the LiDAR updates in GNSS denied environments.
27 June 2022 in IEEE Aerospace and Electronic Systems Magazine
By design, the 4G LTE signals contain a few patterns that repeat in time and frequency (e.g., various reference signals and the cyclic prefix) to facilitate timing synchronization, frequency error estimation, and channel equalization. For communications, these signal components are considered “overhead” serving the purpose of extracting information-carrying symbols for data decoding. When used as signals of opportunity for navigation, they provide times of arrival (TOA), and changes in TOA estimates can be related to the receiver displacement. Indeed, successful use of LTE signals has been reported for ground vehicles, airborne platforms, and indoor positioning in the literature. Even though LTE signals are well specified in the 3GPP standards, some aspects are left to operators as implementation options that depend on the actual deployment environment and local traffic conditions. To better understand the practical aspects of in-the-air LTE signals, experiments were carried out and an initial study of the cyclic and reference patterns in LTE signals for TOA estimation is presented in this article and in particular the effect of antenna ports on TOA estimation. This article aims at providing essential and insightful information directly useable for developing TOA estimation algorithms and ultimately for navigation with LTE signals.
19 October 2023 in IEEE Transactions on Aerospace and Electronic Systems
In the field of positioning and navigation, global navigation satellite system (GNSS) and inertial navigation system (INS) integration is a widely used approach to provide continuous and accurate navigation solutions. The most commonly used algorithm is the error-state extended Kalman filter (ES-EKF). As a modelbased algorithm, the ES-EKF estimates the accumulated error in the strapdown computation based on a priori system models and noise statistics. The performance of the conventional ES-EKF is influenced by the noise model assumptions, system model deficiencies, and a variety of errors in the inertial measurement units (IMU). To improve the accuracy of GNSS/INS integration, this paper proposes a hybridization of model-based and learning-based algorithms to learn the optimal Kalman gain together with the errors in the IMU measurements. The hybridization algorithm reduces the training effort while maintaining interpretability compared to learningbased algorithms. We evaluate the proposed algorithm on the simulated 2D dataset and demonstrate its superior performance over the ES-EKF in terms of both estimated navigation solutions and IMU errors.
Direct Position Estimation (DPE) is a rather new Global Navigation Satellite System (GNSS) technique to estimate the user position, velocity and time (PVT) directly from correlation values of the received GNSS signal with receiver internal replica signals. If combined with Bayesian nonlinear filters—like particle filters—the method allows for coping with multi-modal probability distributions and avoids the linearization step to convert correlation values into pseudoranges. The measurement update equation (particle weight update) is derived from a standard GNSS signal model, but we show that it cannot be used directly in a receiver implementation. The numerical evaluation of the formulas needs to be carried out in a logarithmic scale including various normalizations. Furthermore, the residual user range errors (coming from orbit, satellite clock, multipath or ionospheric errors) need to be included from the very beginning in the stochastic signal model. With these modifications, sensible probability functions can be derived from the GNSS multi-correlator values. The occurrence of multipath yields a natural widening of the probability density function. The approach is demonstrated with simulated and real-world Binary Phase Shift Keying signals with 1.023 MHz code rate (BPSK(1)) within the context of a real-time software based Bayesian DPE receiver.