Historic-cultural greenways integrate heritage conservation, ecology, and development, yet existing planning often overlooks heritage spatial heterogeneity and network drivers. This study proposes a PCA–MCR–NA framework for heritage-oriented greenway planning, applied to Jinzhong (China) with PACA (France) as reference. Results show that transport accessibility, land use conditions, and topographic features dominate greenway siting suitability in Jinzhong, while cultural landscape continuity, heritage network structure, and ecological factors carry comparatively greater relative weight in PACA. The comprehensive resistance surface exhibits a pattern of higher resistance in the southeast and lower resistance in the northwest; core suitable areas and suitable construction areas account for approximately 29% and 41%, respectively. Compared to conventional planning, the framework raises protected heritage unit coverage from 71% to 93%, connectivity from 0.68 to 0.84 (+23.5%), cuts costs by 2.7%, and reduces ecological disturbance by 10.0%. The optimized network identifies three major corridors, four functional zones, and multiple nodes. Findings confirm heritage networks shaped by culture–ecology–space interactions, and the framework offers a transferable tool for complex heritage regions with multi-objective conflicts.
The function of urban green spaces within the urban ecosystem should not be underestimated; therefore, optimizing the urban green space planning system is of great importance. In this research, City S was chosen as the representative study area; the urban green space network structure was developed according to the “four belts, three rings, seven wedges, and network linkages” model. By employing CFD simulation technology together with RS and GIS methods, the relationships and variation trends of wind speed, SO₂ concentration, and temperature were examined comprehensively, thereby confirming the effectiveness of the optimization scheme. Based on the analytical findings, numerical simulation errors for wind speed, SO₂ concentration and temperature are relatively small, satisfying the demands for simulation accuracy at the urban scale. The optimized urban ventilation environment is good, with the SO₂ concentration being in the range from 0–0.05169 mg/m³. Meanwhile, the urban heat island has been effectively controlled. Therefore, the proposed method in this paper can provide better optimization suggestions for urban green space system planning.