Permeability is a critical parameter governing the gas flow behavior of the coalbed methane (CBM) reservoir during the exploration and exploitation of CBM, as well as the geological storage of CO2 in the coalbeds. It is strongly associated with the multi-scale fractures developed in coal. Based on the distribution characteristics of micro-fractures, a multi-scale permeability model for coal reservoirs was established by introducing the permeability tensor, which comprehensively considers adsorption-induced coal swelling, pore pressure, effective stress, and micro-fractures. Further, the dynamic evolution law and mechanism of multi-scale permeability of coal reservoirs under different adsorption pressures were discussed. The results indicate that the increase in effective stress on the coal caused by adsorption-induced swelling essentially leads to a decrease in the equivalent multi-scale permeability of coal. Two key indicators, namely equilibrium pressure and rebound pressure, were defined to quantitatively characterize the evolution law of the equivalent multi-scale permeability during gas adsorption or desorption processes. The effective stress generated by the CO2 adsorption-induced swelling effect in the low-rank coal is 1.47 times that in the middle-rank coal and 2.51 times that in the high-rank coal. Additionally, the effective stress generated by the CO2 adsorption-induced swelling effect in the low-rank coal is 5.15 times that generated by N2, while this level is 4.32 times higher than that in the middle-rank coal. Therefore, compared with the low- and middle-rank coal, the high-rank coal exhibits a smaller decrease in multi-scale permeability due to its weaker adsorption-induced swelling effect. During N2 adsorption, the pore pressure effect dominates over the adsorption-induced swelling effect, resulting in a decrease in the effective stress on the coal with increasing gas pressure. Consequently, the equivalent multi-scale permeability of coal will increase much more significantly with an increase in injected N2 pressure than with an increase in CO2 pressure. By accounting for the differences between the effects of adsorption-induced swelling and pore compression on the equivalent multi-scale permeability of coal reservoir, the injectivity of CO2 can be improved by mixing it with N2.
Coral reef limestone(CRL) is a distinctive geotechnical medium in island–reef regions, and its penetration resistance is of great significance for the construction of underground engineering facilities and the enhancement of protective capabilities on islands and reefs. In this study, penetration experiments were carried out on CRL using alloy-steel projectiles with three different scaling ratios, in order to investigate the effects of projectile velocity and projectile diameter on the failure characteristics of the CRL targets. In addition, numerical simulations of projectile penetration into CRL targets were conducted using the finite element software LS-DYNA. The simulated results of penetration depth, crater diameter, and crater depth were in close agreement with the experimental measurements, demonstrating the high reliability of the proposed model. Furthermore, size-effect correction factors for penetration depth, crater diameter, and crater depth were obtained.
The propagation characteristics of stress waves in soil directly influence the safety assessment of underground structures, engineering protection design, and disaster prediction. When explosives are detonated at different burial depths, the shallow underground medium near the explosion center will be simultaneously subjected to direct ground shock and induced ground shock. Existing research has focused either on direct ground shock or induced ground shock separately, without considering the combined effects of the two. Therefore, this paper focuses on exploring the influence of the key parameter of explosion burial depth on the propagation law of stress waves in soil. It also analyzes the effects of factors such as explosive type. Building on the pressure–volumetric strain relationship of Luoyang loess from prior research, the pressure–density correlation in the SAND model’s shock compaction equation was refined. Contact explosion and semiburied explosion tests on loess validated the numerical model using experimental data. Twenty‐two simulation cases were systematically conducted to examine how scaled charge burial depth (SCBD) and explosive types influence ground shock zoning. Key results reveal the following: As charge depth increases, induced ground shock peaks attenuate, while direct ground shock peaks amplify, merging dual peaks in pressure and vertical stress time travel curves into a single peak. This transition defines three stress wave subzones: surface subzone, near‐surface subzone, and central subzone. At SCBD values of −0.05–0.075 m/kg 1/3 , the central subzone expands rapidly with increasing SCBD, accompanied by surface subzone contraction and gradual near‐surface subzone growth. Ground shock zoning stabilizes at SCBD values of 0.1–0.4 m/kg 1/3 . While explosive type governs kinetic energy partitioning between air and soil, the angular distribution of ground shock subzones shows a linear relationship with Iair / Isoil (air overpressure impulse vs. direct ground shock stress impulse) within specific parametric ranges. The research findings provide a theoretical basis and technical support for relevant engineering practices.