yan Wang

Mr. yan Wang


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2025 in Buildings
Verified
Journal Article
Open access
PDF file
ZZZejun Zhang
Zejun Zhang
YQYu Qin
Yu Qin
GLGuanxu Long
Guanxu Long
YRYao Ran
Yao Ran
YGYanhua Guan
Yanhua Guan
YQYuanshun Qian
Yuanshun Qian
To improve the design theory of prestressed carbon fiber sheet reinforcement and enrich its practical application, a corresponding theoretical analysis and experimental study were carried out. According to the ductile failure condition of reinforced concrete (RC) beams and the plane cross-section assumption, the initial tensile strain control range of carbon fiber sheets with different reinforcement layers was analyzed. Based on the requirement of improving the flexural capacity of beams, a calculation method for reinforcement layers and the initial tensile strain of carbon fiber sheets was proposed. According to the requirements of the practice of prestressed carbon fiber sheet reinforcement, a design process for strengthening RC beams with prestressed carbon fiber sheets was proposed. Through the proposed design method and design process, the design and practice of prestressed carbon fiber sheet reinforcement of RC beams were carried out, and a four-point bending test was carried out on a reinforced beam. The results showed that the failure mode of RC beams after reinforcement was plastic failure, which met the designed bearing capacity requirement.

8 February 2026 in Coatings
Verified
Journal Article
Open access
PDF file
RSRenjuan Sun
Renjuan Sun
YWyan Wang
yan Wang
YGYanhua Guan
Yanhua Guan
CMChuanyi Ma
Chuanyi Ma
CWChuan Wang
Chuan Wang
YRYao Ran
Yao Ran
Concrete is widely employed in structural engineering; however, its porous nature renders it vulnerable to chloride ingress and salt freezing cycles, ultimately compromising its durability. To address this, a penetrating primer based on tetraethyl orthosilicate (TEOS) was prepared in an ethanol-water co-solvent system, and a hydrophobic topcoat of isooctyltriethoxysilane (IOTES) was obtained via emulsification. A layered application on concrete surfaces yielded a TEOS–IOTES dual-coating protection system designed to enhance water repellency and thereby improve resistance to chloride penetration and salt freeze–thaw damage. Test results show that the dual coating markedly increased hydrophobicity, giving a water contact angle of 130° and reducing water absorption rate to below 0.01 mm/min0.5. Compared with single-layer treatments, the dual coating significantly lowered the free chloride diffusion coefficient (reached 83.74%). In terms of salt freezing cycle resistance, the dual-coating protection delayed surface scaling and increased the critical number of freeze–thaw cycles required for damage by 40%. Microstructural analyses indicate that the TEOS primer generates nano-SiO2 and C-S-H gels, refining pores and densifying the matrix, while the IOTES topcoat forms a durable hydrophobic layer that suppresses moisture and deleterious ion transport. The synergistic “densification–hydrophobization” mechanism substantially enhances concrete durability, offering a cost-effective and efficient surface-protection strategy with promising application potential.