A M_W 6.3 earthquake struck on April 6, 2009 the Abruzzi region (central Italy) producing vast damage in the L'Aquila town and surroundings. In this paper we present the location and geometry of the fault system as obtained by the analysis of main shock and aftershocks recorded by permanent and temporary networks. The distribution of aftershocks, 712 selected events with M_L ≥ 2.3 and 20 with M_L ≥ 4.0, defines a complex, 40 km long, NW trending extensional structure. The main shock fault segment extends for 15–18 km and dips at 45° to the SW, between 10 and 2 km depth. The extent of aftershocks coincides with the surface trace of the Paganica fault, a poorly known normal fault that, after the event, has been quoted to accommodate the extension of the area. We observe a migration of seismicity to the north on an echelon fault that can rupture in future large earthquakes.

Wavefield polarization is investigated using 200 seismograms recorded by a network of 20 stations installed on rock outcrops in the Val d'Agri region that hosts the largest oil fields in the southern Apennines (Italy). Polarization is assessed both in the frequency and time domains through the individual‐station horizontal‐to‐vertical spectral ratio and covariance‐matrix analysis, respectively. We find that most of the stations show a persistent horizontal polarization of waveforms, with a NE‐SW predominant trend. This direction is orthogonal to the general trend of Quaternary normal faults in the region and to the maximum horizontal stress related to the present extensional regime. According to previous studies in other areas, such a directional effect is interpreted as due to the presence of fault‐related fracture fields, polarization being orthogonal to their predominant direction. A comparison with S wave anisotropy inferred from shear wave splitting indicates an orthogonal relation between horizontal polarization and fast S wave direction. This suggests that wavefield polarization and fast velocity direction are effects of the same cause: The existence of an anisotropic medium represented by fractured rocks where shear wave velocity is larger in the crack‐parallel component and compliance is larger perpendicularly to the crack strike. The latter is responsible for the observed anisotropic pattern of amplitudes of horizontal ground motion in the study area.

At 01:36 UTC (03:36 local time) on August 24th 2016, an earthquake Mw 6.0 struck an extensive sector of the central Apennines (coordinates: latitude 42.70° N, longitude 13.23° E, 8.0 km depth). The earthquake caused about 300 casualties and severe damage to the historical buildings and economic activity in an area located near the borders of the Umbria, Lazio, Abruzzo and Marche regions. The Istituto Nazionale di Geofisica e Vulcanologia (INGV) located in few minutes the hypocenter near Accumoli, a small town in the province of Rieti. In the hours after the quake, dozens of events were recorded by the National Seismic Network (Rete Sismica Nazionale, RSN) of the INGV, many of which had a ML > 3.0. The density and coverage of the RSN in the epicentral area meant the epicenter and magnitude of the main event and subsequent shocks that followed it in the early hours of the seismic sequence were well constrained. However, in order to better constrain the localizations of the aftershock hypocenters, especially the depths, a denser seismic monitoring network was needed. Just after the mainshock, SISMIKO, the coordinating body of the emergency seismic network at INGV, was activated in order to install a temporary seismic network integrated with the existing permanent network in the epicentral area. From August the 24th to the 30th, SISMIKO deployed eighteen seismic stations, generally six components (equipped with both velocimeter and accelerometer), with thirteen of the seismic station transmitting in real-time to the INGV seismic monitoring room in Rome. The design and geometry of the temporary network was decided in consolation with other groups who were deploying seismic stations in the region, namely EMERSITO (a group studying site-effects), and the emergency Italian strong motion network (RAN) managed by the National Civil Protection Department (DPC). Further 25 BB temporary seismic stations were deployed by colleagues of the British Geological Survey (BGS) and the School of Geosciences, University of Edinburgh in collaboration with INGV. All data acquired from SISMIKO stations, are quickly available at the European Integrated Data Archive (EIDA). The data acquired by the SISMIKO stations were included in the preliminary analysis that was performed by the Bollettino Sismico Italiano (BSI), the Centro Nazionale Terremoti (CNT) staff working in Ancona, and the INGV-MI, described below.