In this contribution we provide benchmark problems in the field of computational solid mechanics. In detail, we address classical fields as elasticity, incompressibility, material interfaces, thin structures and plasticity at finite deformations. For this we describe explicit setups of the benchmarks and introduce the numerical schemes. For the computations the various participating groups use different (mixed) Galerkin finite element and isogeometric analysis formulations. Some programming codes are available open-source. The output is measured in terms of carefully designed quantities of interest that allow for a comparison of other models, discretizations, and implementations. Furthermore, computational robustness is shown in terms of mesh refinement studies. This paper presents benchmarks, which were developed within the Priority Programme of the German Research Foundation ‘SPP 1748 Reliable Simulation Techniques in Solid Mechanics—Development of Non-Standard Discretisation Methods, Mechanical and Mathematical Analysis’.
In the present work, the discontinuous Galerkin (DG) method is applied to linear elasticity for two-dimensional and three-dimensional settings. A locking-free element formulation based on reduced integration and physically-based hourglass stabilization (Q1SP) is coupled for the first time with the DG framework. The incomplete interior penalty Galerkin method is chosen, being one example of different variations of DG methods. Several 2D and 3D typical benchmark problems of linear elasticity are investigated. A selection of numerical integration schemes for the boundary terms is presented, namely reduced and mixed integration schemes. The treatment of the surface terms by means of different rules of integration shows a significant influence on the performance of the resulting DG method in combination with the standard Q1 element. This intelligent treatment of the surface part leads to a DG variant with very good convergence properties.
13 December 2019 in International Journal for Numerical Methods in Engineering
Summary: In this work, modeling of brittle failure of the interface for a linear elastic material is presented. The idea is to integrate a novel extrinsic cohesive zone model into the incomplete interior penalty Galerkin variant of the discontinuous Galerkin (DG) method. As a result, the initial stiffness in the prefailure regime is omitted without having to remesh the crack path during the crack propagation. The interface model is used in combination with different discretization techniques, including matching and nonmatching meshes. This is possible due to the DG method's weak continuity constraint. Moreover, the locking problem in the bulk is cured by the application of a reduced Gaussian integration scheme on the boundary terms. The performance of the new cohesive discontinuous Galerkin elements with different integration schemes is compared with one of the standard intrinsic cohesive models. Due to the elimination of locking, crack initiation at the interface can be realistically displayed.
28 October 2024 in Advances in Mechanical Engineering
Determining residual stresses is essential for ensuring the safety and longevity of gear components. Traditional methods, such as analytical, numerical, and experimental approaches, are often costly, time-consuming, and sometimes destructive. This study proposes a new method to predict residual stresses in gear units using artificial intelligence based on data from finite element analysis. To achieve this, a commercial finite element tool models the heat treatment and carburization processes, grounded in thermomechanical metallurgical physics. The residual stresses obtained from finite element analysis are then compared to the ones from experiment using deep hole drilling approach. This is followed by a sensitivity analysis. Next, a specific class of gearbox component geometries and the computed stress fields are utilized to train artificial neural networks. The performance of the artificial neural networks approach is compared to that of two different machine learning regression methods. It has been concluded that this technique successfully anticipates residual stresses in components with scaled geometries and similar heat treatment steps, outperforming the two regression models in accuracy and efficiency. Importantly, it achieves this with incomparable, significantly less computation time compared to standard finite element analysis.