国庆 李

Dr. 国庆 李

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 June 2024 in Applied Thermal Engineering
Verified
Journal Article
Closed access
CWChenfeng Wang
Chenfeng Wang
国李国庆 李
国庆 李
NLNianqiang Li
Nianqiang Li
ALAng Li
Ang Li
XLXingen Lu
Xingen Lu

19 July 2023 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
HLHao Liu
Hao Liu
国李国庆 李
国庆 李
ALAng Li
Ang Li
SZShen Zhang
Shen Zhang
HLHui Li
Hui Li
XLXingen Lu
Xingen Lu
Being an important component of aero-engines, the labyrinth seal has always been the focus of research for leakage characteristics. Rotation is usually neglected or taken for minimal effect on seal leakage in previous studies. However, the effect of high rotational speed is inevitable to understand the leakage characteristics of labyrinth seal accurately. Meanwhile, due to high rotational speed, viscous heat is generated massively to result in the rapid temperature rise of leakage flow. Also, the influence of rotational speed on windage heating inside the seal clearance has not been indicated completely. Therefore, the leakage and windage heating of staggered labyrinth seals with smooth and honeycomb lands were experimentally and numerically studied. The large-scale and multifunctional sealing test rig were employed to carry out the experiments with rotational speed 12,000 rpm and pressure ratio range 1.1–2.2. The simulation data obtained by three-dimensional computational fluid dynamics methodology show great agreement with experimental results. Notably, the leakage coefficient is not monotonically decreasing with increased rotational speed, but exists a maximum peak at RPM = 8000. The variation of axial kinetic energy in seal clearance entrances provides a clear explanation of the phenomenon. Rotational speed plays an important role in windage heating, and honeycomb cell size is of secondary importance. Based on simulation data, the calculating formula of windage heating is fitted and shows great performance. This study can provide theory and data support for the follow-up structural optimum design of the labyrinth seal.

6 January 2026 in International Journal of Heat and Fluid Flow
Verified
Journal Article
Closed access
JLJialin Liu
Jialin Liu
国李国庆 李
国庆 李
CWChenfeng Wang
Chenfeng Wang
XBXiaohui Bai
Xiaohui Bai
YZYanfeng Zhang
Yanfeng Zhang
XLXingen Lu
Xingen Lu

4 March 2024 in ASME Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
PDF file
国李国庆 李
国庆 李
ALAng Li
Ang Li
SZShen Zhang
Shen Zhang
CWChenfeng Wang
Chenfeng Wang
XLXingen Lu
Xingen Lu
Under the influence of secondary flow, the film cooling deviates from the flow direction on the turbine blade, which directly results in undesirable uneven film coverage. On the pressure side, the film appears divergent, while on the suction side, it is bunched. To solve this problem, a kind of subregional compound angle is proposed, in which the angle in the spanwise direction is different in different regions depending on the strength and direction of the secondary flow. Four rows of film holes with five kinds of subregional compound angles are provided on the pressure side, while two rows of film holes with different subregional compound angles are provided on the suction side. The Reynolds Average Navier–Stokes (RANS) method of the SST k–ω turbulence model is chosen to solve the above blade arrangement. The results show that a significant improvement can be achieved by the introducing subregional compound injection of the film coolant compared to the case of simple injection. In compound injection, the injectant maintains sufficient momentum to prevent the coolant from being swept away by the secondary flow. This was found to be largely the case for most holes on the pressure side, and some holes on the suction side. However, for holes near the downstream section of the suction surface of the blade, where the passage vortex is strongest, no value is found for the compound angle that could redirect the coolant along the blade profile without radial deviation. In some cases, excessive values of the compound angle led to jet liftoff rather than spreading the film along the surface.

19 August 2024 in Case Studies in Thermal Engineering
Verified
Journal Article
Open access
HLHao Liu
Hao Liu
国李国庆 李
国庆 李
HLHui Li
Hui Li
ALAng Li
Ang Li
XLXingen Lu
Xingen Lu

3 October 2024 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
HLHao Liu
Hao Liu
国李国庆 李
国庆 李
CKChenyang Kang
Chenyang Kang
YRYunhong Ruan
Yunhong Ruan
RWRuofan Wang
Ruofan Wang
XLXingen Lu
Xingen Lu
Improving the sealing performance of labyrinth seal is beneficial in reducing the loss of downstream components as well as improving the aero-engines' efficiency. Meanwhile, the optimization of labyrinth seal is more cost-effective than optimizing other components of aero-engines. Based on extreme gradient boosting (XGBoost) and improved genetic algorithm (GA), an automatic optimizer for smooth straight-through labyrinth seal is proposed. According to the ordering of feature importance, the ten selected geometric parameters of smooth straight-through labyrinth seals with two gaps (0.1 mm, 0.25 mm) are optimized when the axial length of labyrinth seal is limited. The optimization results show that the leakage rate of the optimized labyrinth seal with two gaps is 19.67% and 23.80% lower than the reference labyrinth seal, respectively. It is found that the decrease of fin height, fin angle, fillet radius, and fin width, and the increase of fin pitch are beneficial to improve the sealing performance of smooth straight-through labyrinth seal. The analysis of flow field reveals the reasons for the improvement of sealing performance due to the change of geometric parameters. However, it must be noted that the optimization effect decreases as the pressure ratio increases, primarily as the result of the increase in carry-over coefficient. This work provides a new approach to optimize smooth straight-through labyrinth seal.