This paper presents a complete characterization of shortest paths to a goal position for a robot with unicycle kinematics and an on-board camera with limited field-of-view (FOV), which must keep a given feature in sight. Previous work on this subject has shown that the search for a shortest path can be limited to simple families of trajectories. In this paper, we provide a complete optimal synthesis for the problem, i.e., a language of optimal control words, and a global partition of the motion plane induced by shortest paths, such that a word in the optimal language is univocally associated with a region and completely describes the shortest path from any starting point in that region to the goal point. An efficient algorithm to determine the region in which the robot is at any time is also provided.
This article proposes an online optimal active perception strategy for differentially flat systems meant to maximize the information collected via the available measurements along the planned trajectory. The goal is to generate online a trajectory that minimizes the maximum state estimation uncertainty provided by the employed observer. To quantify the richness of the acquired information about the current state, the smallest eigenvalue of the constructibility Gramian is adopted as a metric. In this article, we use B-splines for parametrizing the trajectory of the flat outputs and we exploit a constrained gradient descent strategy for optimizing online the location of the B-spline control points in order to actively maximize the information gathered over the whole planning horizon. To show the effectiveness of our method in maximizing the estimation accuracy, we consider two case studies involving a unicycle and a quadrotor that need to estimate their poses while measuring two distances w.r.t. two fixed landmarks. Concurrent estimation of calibration/environment parameters is also considered for illustrating how the proposed method copes with instances of active self-calibration and map building.
18 April 2013 in The International Journal of Robotics Research
In this paper we study the problem of optimally designing glove-based sensing devices for hand pose reconstruction to maximize their potential for precision. In a companion paper we studied the problem of maximizing the reconstruction accuracy of the hand pose from partial and noisy data provided by any given pose sensing device (a sensorized “glove”) taking into account the knowledge of how humans most frequently use their hands in grasping tasks. In this paper we consider the dual problem of how to design pose sensing devices, i.e. how and where to place sensors on a glove, to get maximum information about the actual hand posture. We study the optimal design of gloves of different nature, according to a classification of current sensing technologies adopted in the domain. The objective is to provide, for given a priori information and fixed number of sensor inputs, the optimal design minimizing the reconstruction error statistics (assuming that optimal reconstruction algorithms are adopted). Finally, an experimental evaluation of the proposed method for optimal design is provided.
25 February 2013 in The International Journal of Robotics Research
Many applications in human–machine interfaces, information visualization, rehabilitation and entertainment require hand pose reconstruction systems that are both accurate and economic. Unfortunately, economically and ergonomically viable sensing gloves provide limited precision due to the imperfect and incomplete correspondence of sensing models with the anatomical degrees of freedom of the human hand, and because of measurement noise. This paper examines the problem of optimally estimating the posture of a human hand using non-ideal sensing gloves. The main idea is to maximize their performance by exploiting knowledge of how humans most frequently use their hands. To increase the accuracy of pose reconstruction without modifying the glove hardware — hence basically at no extra cost — we propose the collection, organization, and exploitation of information on the probabilistic distribution of human hand poses in common tasks. We discuss how a database of such a priori information can be built, represented in a hierarchy of correlation patterns or postural synergies, and fused with glove data in a consistent way, so as to provide good hand pose reconstruction in spite of insufficient and inaccurate sensing data. Simulations and experiments on a low-cost glove are reported which demonstrate the effectiveness of the proposed techniques.
This article raises the issue of collaboration between the field of dance and that of robotics. Dance notation systems are developed in the choreographic field as a method to describe and record human movements. Translating movements into symbols is of particular concern for computer science and robotics, which are interested in generating anthropomorphic motions in robots or animated avatars. We examine different research projects on the use of Laban notation for this purpose, and present our own attempt at generating dance movements in a humanoid robot from a Laban score. We discuss the interests and difficulties related to the use of a dance notation system in a robotic context.
19 June 2020 in IEEE Robotics and Automation Letters
We propose a novel shared control and active perception framework combining the skills of a human operator in accomplishing complex tasks with the capabilities of a mobile robot in autonomously maximizing the information acquired by the onboard sensors for improving its state estimation. The human operator modifies at runtime some suitable properties of a persistent cyclic path followed by the robot so as to achieve the given task (e.g., explore an environment). At the same time, the path is concurrently adjusted by the robot with the aim of maximizing the collected information. This combined behavior enables the human operator to control the high-level task of the robot while the latter autonomously improves its state estimation. The user's commands are included in a task priority framework together with other relevant constraints, while the quality of the acquired information is measured by the Shatten norm of the Constructibility Gramian. The user is also provided with guidance feedback pointing in the direction that would maximize this information metric. We evaluated the proposed approach in two human subject studies, testing the effectiveness of including the Constructibility Gramian into the task priority framework as well as the viability of providing either visual or haptic feedback to convey this information metric.