This study is focused on the controllable coating of the carbonyl iron (CI) particles widely applied in magnetorheology. These particles were grafted with poly(glycidyl methacrylate) (PGMA) with narrow polydispersity via surface-initiated atom transfer radical polymerization. Two types of core–shell particles differing in molecular weights of grafted polymer chains were synthesized. The effect of shell thickness on the thermo-oxidation stability of particles as well as the sedimentation stability of their silicone oil suspensions was evaluated. The successful coating process was confirmed by Fourier transform infrared spectroscopy and energy-dispersive spectrometry. The differences in the magnetic properties of bare and coated CI particles were clarified through vibrating sample magnetometry. Due to the controllable length of the PGMA grafts, the magnetic properties remain almost the same as those for bare CI. The magnetorheological (MR) behavior of silicone oil suspensions containing 60 wt% of bare CI particles as well as PGMA-coated analogues was investigated in the absence and in the presence of various magnetic field strengths, demonstrating the negligible impact of surface modification on final MR performance. Thus, the grafting of the particles with PGMA negligibly affected magnetic properties but considerably enhanced thermo-oxidation and sedimentation stabilities. Finally, a novel tensiometric method for sedimentation stability measurements of MR suspensions was successfully implemented.

With the aim of increasing the efficiency of maintenance and fuel usage in airplanes, structural health monitoring (SHM) of critical composite structures is increasingly expected and required. The optimized usage of this concept is subject of intensive work in the framework of the EU COST Action CA18203 “Optimising Design for Inspection” (ODIN). In this context, a thorough review of a broad range of energy harvesting (EH) technologies to be potentially used as power sources for the acoustic emission and guided wave propagation sensors of the considered SHM systems, as well as for the respective data elaboration and wireless communication modules, is provided in this work. EH devices based on the usage of kinetic energy, thermal gradients, solar radiation, airflow, and other viable energy sources, proposed so far in the literature, are thus described with a critical review of the respective specific power levels, of their potential placement on airplanes, as well as the consequently necessary power management architectures. The guidelines provided for the selection of the most appropriate EH and power management technologies create the preconditions to develop a new class of autonomous sensor nodes for the in-process, non-destructive SHM of airplane components.

The electrically conductive, transparent, and flexible self-standing thin nanocomposite films based on copolyamide matrix (coPA:Vestamelt X1010) modified with 2D Ti₃C₂T_x (MXene) nanosheets were prepared by casting and their electrical, mechanical and optical properties and then, were investigated. The percolation threshold of the MXene filler within the coPA matrix was found to be 0.05 vol. %, and the highest determined electrical conductivity was 1.4 × 10⁻² S·cm⁻¹ for the composite filled with 5 wt. % (1.8 vol. %) of MXene. The electrical conductivity of the as-prepared MXene was 9.1 S·cm⁻¹, and the electrical conductivity of the MAX phase (the precursor for MXene preparation) was 172 S·cm⁻¹. The transparency of the prepared composite films exceeded 75%, even for samples containing 5 wt. % of MXene, as confirmed by UV spectroscopy. The dynamic mechanical analysis confirmed the improved mechanical properties, such as the storage modulus, which improved with the increasing MXene content. Moreover, all the composite films were very flexible and did not break under repeated twisting. The combination of the relatively high electrical conductivity of the composites filled with low filler content, an appropriate transparency, and good mechanical properties make these materials promising for applications in flexible electronics.