Thumeera Wanasinghe Arachchige

Dr. Thumeera Wanasinghe Arachchige

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2020 in IEEE Access
Verified
Journal Article
Open access
Thumeera Wanasinghe ArachchigeThumeera Wanasinghe Arachchige
Thumeera Wanasinghe Arachchige
LWLeah Wroblewski
Leah Wroblewski
BPBui K. Petersen
Bui K. Petersen
RGRaymond G. Gosine
Raymond G. Gosine
LJLesley Anne James
Lesley Anne James
PWPeter J. Warrian
Peter J. Warrian
With the emergence of industry 4.0, the oil and gas (O&G) industry is now considering a range of digital technologies to enhance productivity, efficiency, and safety of their operations while minimizing capital and operating costs, health and environment risks, and variability in the O&G project life cycles. The deployment of emerging technologies allows O&G companies to construct digital twins (DT) of their assets. Considering DT adoption, the O&G industry is still at an early stage with implementations limited to isolated and selective applications instead of industry-wide implementation, limiting the benefits from DT implementation. To gain the full potential of DT and related technological adoption, a comprehensive understanding of DT technology, the current status of O&G-related DT research activities, and the opportunities and challenges associated with the deployment of DT in the O&G industry are of paramount importance. In order to develop this understanding, this paper presents a literature review of DT within the context of the O&G industry. The paper follows a systematic approach to select articles for the literature review. First, a keywords-based publication search was performed on the scientific databases such as Elsevier, IEEE Xplore, OnePetro, Scopus, and Springer. The filtered articles were then analyzed using online text analytic software (Voyant Tools) followed by a manual review of the abstract, introduction and conclusion sections to select the most relevant articles for our study. These articles and the industrial publications cited by them were thoroughly reviewed to present a comprehensive overview of DT technology and to identify current research status, opportunities and challenges of DT deployment in the O&G industry. From this literature review, it was found that asset integrity monitoring, project planning, and life cycle management are the key application areas of digital twin in the O&G industry while cyber security, lack of standardization, and uncertainty in scope and focus are the key challenges of DT deployment in the O&G industry. When considering the geographical distribution for the DT related research in the O&G industry, the United States (US) is the leading country, followed by Norway, United Kingdom (UK), Canada, China, Italy, Netherland, Brazil, Germany, and Saudi Arabia. The overall publication rate was less than ten articles (approximately) per year until 2017, and a significant increase occurred in 2018 and 2019. The number of journal publications was noticeably lower than the number of conference publications, and the majority of the publications presented theoretical concepts rather than the industrial implementations. Both these observations suggest that the DT implementation in the O&G industry is still at an early stage.

19 May 2020 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
Thumeera Wanasinghe ArachchigeThumeera Wanasinghe Arachchige
Thumeera Wanasinghe Arachchige
RGRaymond G. Gosine
Raymond G. Gosine
LJLesley Anne James
Lesley Anne James
GMGeorge K. I. Mann
George K. I. Mann
OSOscar de Silva
Oscar de Silva
PWPeter J. Warrian
Peter J. Warrian
The low oil price environment is driving the oil and gas industry to become more innovative and deploy smart field technologies, to increase operational and asset efficiency, minimize health, safety and environmental (HSE) risks, improve asset portfolio, reduce capital and operation costs, and maximize capital productivity. The internet of things (IoT) is at the forefront of this digital transformation, enabling seamless real-time data collection, processing, and analysis from a range of equipment, processes, and operations to achieve these objectives. There are various operations/applications in the upstream, midstream, and downstream sectors (e.g., condition-based monitoring, location tracking) for which IoT enabled solutions have a significant impact and offer a range of opportunities to increase socioeconomic benefits. However, there are several impediments (e.g., vulnerability to cyber attacks, lower technological readiness for deploying in Zone-0 and Zone-1 hazardous environments, unavailability of communication infrastructure, labour concerns, and maintenance and obsolescence) that slow the pace of adoption of IoT technologies for regular upstream, midstream, and downstream operations. This review article provides an overview and assessment of the role, impact, opportunities, challenges, and current status of IoT deployment in the oil and gas industry.

2 January 2023 in IEEE Transactions on Automation Science and Engineering
Verified
Journal Article
Closed access
DDDidula Dissanayaka
Didula Dissanayaka
Thumeera Wanasinghe ArachchigeThumeera Wanasinghe Arachchige
Thumeera Wanasinghe Arachchige
OSOscar De Silva
Oscar De Silva
AJAwantha Jayasiri
Awantha Jayasiri
GMGeorge K. I. Mann
George K. I. Mann
This paper presents a comprehensive review of state-of-the-art navigation methods available for unmanned aerial vehicles (UAVs) used in parcel delivery. Particularly, the paper focuses on state-of-the-art sensor configurations, multi-sensor data fusion architectures, and their performance when employed for UAV navigation. Additionally, this paper presents the associated safety regulations for UAV navigation currently imposed by regulatory bodies in US and Canada. The existing navigation solutions sometimes produce degenerative results due to GPS loss, multipath signals, spoofing events, and other sensor degradation scenarios. Therefore, this article investigates the suitability of integrating visual lidar odometry and mapping (VLOAM) with GPS to overcome the limitations of existing navigation solutions. A comparative study of the multi-sensory combined solutions is presented with numerical simulations, validating the regulatory compliance of VLOAM and GPS integrated system under common GPS failure cases. Note to Practitioners —This work was motivated by the need for a survey on existing UAV navigation methods for parcel delivery applications. Different UAV navigation methods exist, depending on the sensors used and the sensor fusion architectures, with varying degrees of localization accuracy. It can be challenging for researchers and practitioners to decide which method to adopt for their application while complying with the existing safety regulations. Therefore, this paper presents an overview of the current safety regulation for UAV navigation and evaluates the state-of-the-art navigation methods against regulatory safety compliance. Additionally, a numerically validated safe navigation method is suggested for UAV-based parcel delivery. This paper provides researchers and practitioners with comprehensive reference sources in the UAV navigation field, which can help them develop suitable solutions to ensure safe navigation.

9 August 2021 in IEEE Access
Verified
Journal Article
Open access
Thumeera Wanasinghe ArachchigeThumeera Wanasinghe Arachchige
Thumeera Wanasinghe Arachchige
TTTrung Trinh
Trung Trinh
TNTrung Nguyen
Trung Nguyen
RGRaymond G. Gosine
Raymond G. Gosine
LJLesley Anne James
Lesley Anne James
PWPeter J. Warrian
Peter J. Warrian
Working at an oil and gas facility, such as a drilling rig, production facility, processing facility, or storage facility, involves various challenges, including health and safety risks. It is possible to leverage emerging digital technologies such as smart sensors, wearable or mobile devices, big data analytics, cloud computing, extended reality technologies, robotic systems, and drones to mitigate the challenges faced by oil and gas workers. While these technologies are not new to the oil and gas industry, most of its existing digital transformation initiatives follow business or process-centric approaches, in which the critical driver of the technology adoption is the enhancement of production, efficiency, and revenue. As a result, they may not address the challenges faced by the workers. As oil and gas workers are among the essential assets in the oil and gas industry, it is vital to address the challenges faced by these workers. This paper proposes a human-centric digital transformational framework for the oil and gas industry to deploy existing digital technologies to enhance their workers' health, safety, and working conditions. The paper outlines the critical challenges faced by oilfield workers, introduces a system architecture to implements a human-centric digital transformation, discusses the opportunities of the proposed framework, and summarizes the key impediment for the proposed framework.

7 January 2025 in IEEE Access
Verified
Journal Article
Open access
MDMihiran Galagedarage Don
Mihiran Galagedarage Don
Thumeera Wanasinghe ArachchigeThumeera Wanasinghe Arachchige
Thumeera Wanasinghe Arachchige
RGRaymond G. Gosine
Raymond G. Gosine
PWPeter J. Warrian
Peter J. Warrian
Industry 4.0 is making a positive impact on the world’s industries in areas such as productivity, efficiency, reliability, and human safety. Although the mining industry has not undergone revolutionary digital change, numerous technologies have been applied and improved during the past two decades. Through a systematic literature survey, this study presents research trends, opportunities, and challenges in the context of digital twinning in the mining industry. The research team initially set the objectives of the research and formulated the search criteria to extract the most relevant and manageable number of scientific peer-reviewed publications. The gathered publications were then filtered using a web-based text reading and analysis environment based on defined criteria. The filtrate of the first step was then refined by manually reading through abstracts, introductions, and conclusions while classifying relevant publications based on aspects such as the country of origin, technologies, and application areas. The filtrate of the second step was subjected to detailed manual reading to further explore the technologies and applications to capture the research trends, opportunities, and challenges. The research outcomes indicate that China, the USA, Australia, Russia, and Canada are the leading countries in this research context. Creating a safer mining environment using virtual reality is popular among other applications and technologies. In the last twenty years, academic institutions and scholars have led research efforts compared to the industry. Over the past five years, both have significantly increased their research contributions, presenting various opportunities and challenges to inspire future studies.

31 August 2020 in IEEE Access
Verified
Journal Article
Open access
Thumeera Wanasinghe ArachchigeThumeera Wanasinghe Arachchige
Thumeera Wanasinghe Arachchige
RGRaymond G. Gosine
Raymond G. Gosine
OSOscar De Silva
Oscar De Silva
GMGeorge K. I. Mann
George K. I. Mann
LJLesley Anne James
Lesley Anne James
PWPeter Warrian
Peter Warrian
Unmanned aerial systems (UAS) represent an evolving technology with enormous potential to revolutionize the oil and gas industry by providing a more efficient, fast, safe, and cost-effective way to perform a variety of field activities. Recently, UAS has received considerable attention from the oil and gas industry. The objective of this review article is to highlight the usability of UAS for the oil and gas industry, focussing mainly on UAS applications and the opportunities and challenges of UAS deployment in such oil and gas applications. Additionally, this paper also covers the available sensory systems for UAS and provides some recommendations to select a UAS for a given oil and gas application.