Kanishka Madusanka Dannangoda Gamage

Dr. Kanishka Madusanka Dannangoda Gamage

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2015
Verified
Conference Paper
Closed access
KGKanishka Madusanka Dannangoda Gamage
Kanishka Madusanka Dannangoda Gamage
LWL. N. S. Wijayasingha
L. N. S. Wijayasingha
RGRuwan Gopura
Ruwan Gopura
RARanjith Amarasinghe
Ranjith Amarasinghe
GMG. K. I. Mann
G. K. I. Mann
Prosthesis is a device extension which is used to replace a missing body part. Amputees who lost all or part of the upper limb may use a prosthesis depending on their requirement. Externally powered prosthesis holds an importance since it is capable of imitating natural limb motions. However, the way they are controlled stand way back from the natural limb. Myoelectric control systems which uses electromyographic signals holds an important role in controlling prosthesis. This paper reviews the myoelectric control systems for upper limb prosthesis. At first control methods based only on myoelectric signals are briefly reviewed. The main focus is given to review hybrid myoelectric control systems. Hybrid myoelectric control methods are categorized and each category is compared and reviewed. Finally feasibility of using vision as an added sensor was discussed with examples from literature.

24 September 2018 in The International Journal of Medical Robotics and Computer Assisted Surgery
Verified
Journal Article
Open access
PDF file
CSChathura Lakshan Semasinghe
Chathura Lakshan Semasinghe
KGKanishka Madusanka Dannangoda Gamage
Kanishka Madusanka Dannangoda Gamage
RRRanaweera Kaluarachchige Pubudu Sampath Ranaweera
Ranaweera Kaluarachchige Pubudu Sampath Ranaweera
RGRuwan Gopura
Ruwan Gopura
Background: Prosthesis is a wearable device that intends to provide the functionality and/or appearance of a missing body part. In the case of trans‐radial prostheses, the wearer or the trans‐radial amputee is fitted with an artificial wrist and a hand that is either mechanically or electro‐mechanically operated. Main aim is to enable the wearer to perform activities of daily living with minimal external assistance.Methods: In this review paper, hardware systems of state‐of‐the‐art trans‐radial prostheses have been briefly discussed. Focus is to provide an insight on the latest technologies employed in development of its mechanical systems: terminal devices, artificial wrist joints, and body attachments. In that context, latest hardware designs on terminal devices for grasping motion are presented as it is the primary function of trans‐radial prostheses. Hardware designs of prosthetic wrists and body attachments are also reviewed. Finally, latest trends and future directions on design of trans‐radial prostheses are explored and presented.Conclusions: Size, shape, weight, durability, appearance, and functionality are the key factors that need to be considered when developing a trans‐radial prosthesis. Moreover, the current developments are moving closer to a human upper limb. However, the availability of these devices is minimum due to high‐tech involved and the high cost, which necessitates further development trans‐radial prostheses.

1 June 2019
Verified
Conference Paper
Closed access
Isira Damsith WijegunawardanaIsira Damsith Wijegunawardana
Isira Damsith Wijegunawardana
MKM.B.K. Kumara
M.B.K. Kumara
HSH.H.M.J. De Silva
H.H.M.J. De Silva
PVP.K.P. Viduranga
P.K.P. Viduranga
RRR.K.P.S. Ranaweera
R.K.P.S. Ranaweera
KGKanishka Madusanka Dannangoda Gamage
Kanishka Madusanka Dannangoda Gamage
This paper proposes a robotic exoskeleton chair, named ChairX, for providing sitting assistance for the industrial workers who need to carry out tasks at different crouched postures repetitively. It can act as a customizable chair to support bodyweight for relieving the lower extremity and provide freedom for ambulation when moving between workstations. In comparison to the predecessors, the ChairX is designed to assist the user for assuming crouched positions with forward- as well as backward-inclined leg angles. Moreover, it is flexible to provide sitting assistance at different heights to ensure ergonomics at work The ChairX includes a knee-centered locking mechanism on the lateral side and an active linkage mechanism on the posterior of the leg to support the weight of the user at various seated positions. A mathematical model was formulated to optimize the system parameters and a prototype was built to carry out the physical tests. The results revealed that ChairX can maintain stability and reduce the musculoskeletal strains effectively, thus has the potential to improve the quality of work.

1 July 2017
Verified
Conference Paper
Closed access
RAR. Achintha M. Abayasiri
R. Achintha M. Abayasiri
KGKanishka Madusanka Dannangoda Gamage
Kanishka Madusanka Dannangoda Gamage
NAN. M. P. Arachchige
N. M. P. Arachchige
ASA. T. S. Silva
A. T. S. Silva
RGRuwan Gopura
Ruwan Gopura
In this paper, a 5 DOF trans-humeral robotic prosthesis: MoBio is proposed. MoBio includes 2 DOF at wrist which is rare in other trans-humeral prostheses. Through anthropometric features MoBio prosthetic arm can achieve elbow flexion/extension, forearm supination/pronation, wrist radial/ulnar deviation, wrist flexion/extension and compound motion of thumb and index finger. An EMG based control method which uses EMG signals of the biceps brachii and triceps brachii, is used with a motion switching mechanism to control the prosthesis. Experimental results have verified the usability and effectiveness of MoBio in performing Activities of Daily Living.

17 July 2017 in IEEE Access
Verified
Journal Article
Open access
KGKanishka Madusanka Dannangoda Gamage
Kanishka Madusanka Dannangoda Gamage
RGRuwan Gopura
Ruwan Gopura
RARanjith Amarasinghe
Ranjith Amarasinghe
GMG. K. I. Mann
G. K. I. Mann
This paper proposes a hybrid vision-based reach-to-grasp task planning method for transhumeral prostheses exploiting both vision and electromyography (EMG) signals. The hybrid method mainly consists of 2-1/2D visual servoing module and EMG-based module. The visual servoing intends to align the object on to the center of the palm while correcting its orientation. EMG signals extracted from the remaining muscles of the disabled arm due to amputation are used to control the elbow flexion/extension (FE). While using the 2-1/2D visual servoing module, the object reaching algorithm changes the elbow FE angle to reach the palm toward the object of interest. Initially, the EMG-based module controls the elbow FE. Once an object is detected, the EMG signals emanating from the arm muscles generate a reach request. This process then activates the visual servoing module to bring the palm toward the object. Since both EMGbased module and the visual servoing module are producing elbow FE angles while reaching toward an object, these two modules are integrated to obtain a resultant angle for elbow FE. Experiments are conducted using a simulation environment and a prosthesis to validate the proposed task planning method. The EMGbased module is capable of following the natural elbow FE motion. Moreover, the task planning method is capable of driving the prosthesis toward the object with proper orientation.

26 December 2016
Verified
Conference Paper
Closed access
CSC. L. Semasinghe
C. L. Semasinghe
JPJ. L. B. Prasanna
J. L. B. Prasanna
HKH. M. Kandamby
H. M. Kandamby
RRR. K. P. S. Ranaweera
R. K. P. S. Ranaweera
KGKanishka Madusanka Dannangoda Gamage
Kanishka Madusanka Dannangoda Gamage
RGRuwan Gopura
Ruwan Gopura
Transradial prosthesis is an artificial wearable limb that provides the functionality and/or appearance of human wrist and hand. Over the recent years, both hardware and control systems for active transradial prosthesis show significant advancement. In that context, this paper reviews the modern transradial prostheses developed for performing activities of daily living. Focus is to provide an insight on the latest technologies, including mechanical designs and control algorithms developed to mimic the biological wrist and hand. The biomechanics of below-elbow of upper-limb and functional requirements such as grasping motion are initially presented. The design difficulties are discussed in the following section. Next, each of the modern transradial prosthesis are briefly reviewed based on design and/or control of fingers, wrists and body attachments. Finally, latest trends and future directions for developing transradial prostheses are explored and unveiled.