Hydroxypropyl methylcellulose (Hypromellose, HPMC) is a well-known excipient used in the pharmaceutical and nutraceutical fields due to its versatile physicochemical properties. HPMC (derived from cellulose and obtained through etherification) varies in polymerization degree and viscosity, factors that both influence its functional applications. Usually, an increased polymerization degree implies a higher viscosity, depending also on the amount of polymer used. Hypromellose plays a crucial role in solid dosage forms, serving as a binder in the case of controlled-release tablets, a film-forming agent in the case of orodispersible films and mucoadhesive films, and a release modifier due to its presence in different polymerization degrees in the case of extended or modified release tablets. However, its compatibility with other excipients and the active ingredient must be carefully evaluated to prevent formulation challenges via several analytical methods such as differential scanned calorimetry (DSC), Fourier Transformed Infrared spectroscopy (FT-IR), X-Ray Particle Diffraction (XRPD), and Scanning Electron Microscopy (SEM). This review explores the physicochemical characteristics, and diverse applications of HPMC, emphasizing its significance in modern drug delivery systems.

One class of cosmetic compounds that have raised interest of many experts is peptides. The search for ingredients with good biocompatibility and bioactivity has led to the use of peptides in cosmetic products. Peptides are novel active ingredients that improve collagen synthesis, enhance skin cell proliferation, or decrease inflammation. Based on their mechanism of action, they can be classified into signal peptides, carrier peptides, neurotransmitter inhibitor peptides, and enzyme inhibitor peptides. This review focuses on the main types of peptides and their application in the cosmetic field, underlining their main limitations. One of the most significant drawbacks of cosmetic peptides is their poor permeability through membranes, which limits their delivery and effectiveness. As a result, this review follows the methods used for improving permeability through the stratum corneum. Increasing peptide bioavailability and stability for enhanced delivery to the desired site of action and visible effects have become central points for the latest research due to their promising features. For this purpose, several methods have been identified and described. Physical techniques include thermal ablation (radiofrequency and laser), electrical methods (electroporation, iontophoresis), mechanical approach (microneedles), and ultrasounds. As an alternative, innovative formulations have been developed in nano-systems such as liposomes, niosomes, ethosomes, nanoemulsions, and other nanomaterials to reduce skin irritation and improve product effectiveness. The purpose of this review is to provide the latest information regarding these noteworthy molecules and the reasoning behind their use in cosmetic formulations.

Obtaining orodispersible tablets (ODT) containing substances from the second Biopharmaceutical Class has raised concerns as the dissolution test is challenging. This study aimed to select suitable excipients for developing orodispersible tablets containing cannabidiol (CBD) by direct compression method. No similar studies were found in the literature. Excipients from different classes were characterized using the SeDeM-ODT tool: fillers – lactose (LCT) and microcrystalline cellulose (CelMC), sweeteners – sorbitol (SRB) and mannitol (MNT), disintegrants – sodium starch glycolate (SSG), sodium croscarmellose (CCS), soy polysaccharides (Emcosoy® – EMCS) and two co-processed excipients (Prosolv®-ODT G2 – PODTG2 and Prosolv® EasyTab sp – PETsp). Drug compatibility with excipients in binary mixtures (1:1) was verified by Differential Scanning Calorimetry (DSC) and Fourier Transform-Infrared (FTIR) spectroscopy. Using the SeDeM-ODT expert system, the fillers and the co-processed excipients showed good properties regarding compressibility and disintegration behavior. Also, the DSC and FTIR results showed that small or no interactions between the CBD and the excipients took place.

Orodispersible tablets (ODTs) are pharmaceutical formulations used to obtain fast therapeutic effects, usually recommended for geriatric and pediatric patients due to their improved compliance, bioavailability, ease of administration, and good palatability. This study aimed to develop ODTs with cannabidiol (CBD) phytocannabinoid extracted from Cannabis sativa used in the treatment of Lennox–Gastaut and Dravet syndromes. The tablets were obtained using an eccentric tableting machine and 9 mm punches. To develop CBD ODTs, the following parameters were varied: the Poloxamer 407 concentration (0 and 10%), the type of co-processed excipient (Prosolv^® ODT G2—PODTG2 and Prosolv^® EasyTab sp—PETsp), and the type of superdisintegrant (Croscarmellose—CCS, and Soy Polysaccharides—Emcosoy^®—EMCS), resulting in eleven formulations (O1–O11). The following dependent parameters were evaluated: friability, disintegration time, crushing strength, and the CBD dissolution at 1, 3, 5, 10, 15, and 30 min. The dependent parameters were verified according to European Pharmacopoeia (Ph. Eur.) requirements. All the tablets obtained were in accordance with quality requirements in terms of friability (less than 1%), and disintegration time (less than 180 s). The crushing strength was between 19 N and 80 N. Regarding the dissolution test, only four formulations exhibited an amount of CBD released higher than 80% at 30 min. Taking into consideration the results obtained and using the Modde 13.1 software, an optimal formulation was developed (O12), which respected the quality criteria chosen (friability 0.23%, crushing strength of 37 N, a disintegration time of 27 s, and the target amount of CBD released in 30 min of 99.3 ± 6%).

This study aimed to develop caffeine (CAF) orodispersible films (ODFs) and verify the effects of different percentages of film-forming agent and hydrotropic substances (citric acid—CA or sodium benzoate—SB) on various film properties. Hydroxypropyl methylcellulose E 5 (HPMC E 5) orodispersible films were prepared using the solvent casting method. Four CAF-ODF formulations were prepared and coded as CAF1 (8% HPMC E 5, CAF), CAF2 (8% HPMC E 5 and CAF:CA–1:1), CAF3 (9% HPMC E 5 and CAF:CA–1:1), and CAF4 (9% HPMC E 5 and CAF:SB–1:1). The CAF-ODFs were evaluated in terms of disintegration time, folding endurance, thickness, uniformity of mass, CAF content, thickness-normalized tensile strength, adhesiveness, dissolution, and pH. Thin, opaque, and slightly white CAF-ODFs were obtained. All the formulations developed exhibited disintegration times less than 3 min. The dissolution test revealed that CAF1, CAF2, and CAF3 exhibited concentrations of active pharmaceutical ingredients (APIs) released at 30 min that were close to 100%, whilst CAF4 showed a faster dissolution behaviour (100% of the CAF was released at 5 min). Thin polymeric films containing 10 mg of CAF/surface area (3.14 cm²) were prepared.

The most used pharmaceutical formulations for children are syrups, suppositories, soft chewable capsules, and mini-tablets. Administrating them might create an administration discomfort. This study aimed to develop and evaluate orodispersible films (ODFs) for pediatric patients in which the fluoxetine (FX) is formulated in the polymeric matrix. Six FX fast dissolving films (10 mg FX/ODF), FX1, FX2, FX3, FX4, FX5, and FX6, were prepared by solvent casting technique. In the composition of the ODFs, the concentration of the hydroxypropyl methylcellulose and the concentration of the propylene glycol were varied. Each formulation of fluoxetine ODF was evaluated by determining the tensile strength, folding endurance, disintegration, behavior in the controlled humidity and temperature conditions, and adhesiveness. All the obtained results were compared with the results obtained for six ODFs prepared without FX. The disintegration time of the FX ODFs was of maximum 88 s for FX2. Via the in vitro releasing study of the FX from the ODFs it was noticed that FX1 and FX2 allow a better release of the drug 99.98 ± 3.81% and 97.67 ± 3.85% being released within 15 min. From the obtained results it was also confirmed that FX ODFs were found to follow first-order release kinetic.