In this article, we propose a novel quasi-sinusoidal-wave excitation scheme for switched reluctance motors (SRMs) to minimize torque ripple fully considering the high-order inductance harmonics and their phase angle difference. The torque production mechanism is interpreted by the interaction of phase inductance harmonics and the defined virtual phase currents, based on which the components, influence factors, and compensation principle of torque harmonics are analyzed in detail. To reduce the torque ripple caused by the fundamental and zero-axis virtual currents, this article proposes a q -axis virtual current injection strategy based on the specific constraints of the q -axis virtual currents in different dq 0-axis coordinates and a zero -axis virtual current optimization strategy based on extreme point determination method, respectively. Meanwhile, an online torque modification is specially applied to the defined disaster regions to minimize the uncontrollable torque error. In addition, a vector resynthesis strategy of fundamental virtual current is adopted to further improve the torque capability by minimizing the generation of negative phase torque. The proposed quasi-sinusoidal-wave excitation scheme shows strong universality and excellent effectiveness for SRM with various structure differences. Experiments on a three-phase 12/8-pole SRM prototype are carried out to verify the feasibility and effectiveness of the proposed scheme.
30 January 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper develops a highly-integrated solar-assisted switched reluctance motor (SRM) drive for electric vehicle (EV) applications with electric-drive-reconstructed grid-to-vehicle (G2V) and vehicle-to-grid (V2G)/vehicle-to-load (V2L) functions. The flexible and efficient multimode energy transmission is realized among SRM, battery pack, solar photovoltaic (PV) panels, and AC grid. Under motoring condition, the standard switch modules are employed to implement bipolar current excitation and regenerative braking, which provides great benefits for balanced heat dissipation design and massive production of SRM drives for EVs. Under idle condition, the G2V and V2G/V2L modes can be well-regulated by multiplexing and reconstructing SRM windings and converter topology. The EV can be completely stationary without extra clamping device under the adopted positioning strategy. The battery pack can be charged by the developed bridgeless interleaved boost converter with excellent power factor correction capability, and can also act as discharging source to power the AC/DC grids/loads flexibly cooperated with the PV panels. A proof-of-concept prototype platform is built and the experiments based on a 1 kW three-phase 12/8 SRM are carried out to validate the feasibility of the proposed SRM system.
To control the high‐frequency acoustic noise of the permanent magnet synchronous machine (PMSM) with the space vector pulse‐width modulation (SVPWM), an investigation into the mechanism of the sideband vibro‐acoustics is presented in this study. Especially, the relationship is developed between the sideband electromagnetic components and the mechanical vibro‐acoustics, which paves the fundamentals to reduce the noise at the sources. Firstly, the analytical derivations of the sideband voltage and current harmonics are expressed, while the magnetic components of permanent magnet and armature reaction are also discussed in different carrier frequency domains. Secondly, the corresponding radial electromagnetic force analysis is established to acquire the pattern of the vibro‐acoustic. Finally, the proposed multi‐physics models are reconstructed by coupling spatial and temporal features, where the amplitudes are also calculated. A 12‐slot10‐pole prototype PMSM is considered as a case study to testify the accuracy of the proposed method, where the corresponding electromagnetic components are calculated and measured under different conditions, together with the vibration and acoustics. This investigation may provide a new route for the acoustics prediction and the precise optimisation of PMSM.
20 June 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper presents a comprehensive investigation into the sideband vibro-acoustics with continuous and discontinuous pulse-width modulation (PWM) strategies in permanent magnet synchronous motor (PMSM). The primary motivation for the evaluation reveals the frequency distributions of the sideband components and the magnitudes suppression with the space vector PWM (SVPWM) and the discontinuous PWM (DPWM). The principle and implementation of the conventional SVPWM and six basic DPWM modes are firstly presented. The sideband harmonic components are provided by the analytical derivations, in which the frequency distributions are established by coupling the temporal features between the current harmonics and radial electromagnetic force. To evaluate and compare the sideband current harmonics and vibro-acoustic responses among the PWM schemes, the experimental tests are presented in a study case of 12 /10 PMSM. Significant deterioration is observed in each of the basic DPWMs compared to that in SVPWM. Developed with periodic dithering modulation, notable sideband harmonics suppression and vibro-acoustic improvements in DPWM schemes are observed. This work is expected to provide guidance for a hybrid modulation strategy in electric vehicles.
23 December 2020 in IEEE Transactions on Energy Conversion
This paper presents an investigation into sideband vibro-acoustics suppression of the permanent magnet synchronous motor (PMSM), associated with several periodic signal-based dithering modulations. Mathematical derivations of four typical periodic signal-based schemes are deduced with the power spectral density (PSD) method. The individual modulation parameters, such as bandwidth and modulation ratio, are determined the values to minimize the sideband vibro-acoustics. The frequency distributions of the sideband components are discussed by the analytical derivations. The relationship between the electromagnetic components and mechanical responses is reconstructed by coupling with temporal features. For verification, the experimental tests with a prototype PMSM are introduced under different operational conditions. According to the results and figures, both magnitude suppression and frequency distribution are accurately correlated with sideband harmonic components as well as vibro-acoustic responses. This investigation thus clearly holds promise for the evaluation and optimization in powertrain used by electric vehicles.
25 August 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper focuses on the linear inductance model-based sensorless position estimation for medium- and low-speed switched reluctance motor (SRM) drive. With the developed model reshaping schemes, the position estimation error caused by magnetic saturation is effectively suppressed. Given the specific constant sum characteristics of phase inductances under unsaturation condition, a virtual inductance construction strategy is specially proposed for three-phase SRMs to avoid the impact of magnetic saturation, which shows excellent enforceability and simplicity. On the other hand, to meet the requirement of strong portability for three-phase and above multi-phase SRMs, an equivalent position triangle is built in real-time to recognize the position error caused by magnetic saturation and assist in a novel self-calibration technique of the inductance linearity. Both the reshaping schemes can achieve the high-precision sensorless position estimation under severer magnetic saturation. The simulation and experiments on a 150W three-phase 12/8-pole SRM prototype validate the feasibility and effectiveness of the proposed sensorless estimation schemes.