A two-dimensional unsteady seepage model for coal using a finite element program is developed, and the temporal variations of key factors such as water pressure and hydraulic gradient are analyzed in this paper. Additionally, the triaxial rock mechanical experiment and utilized pneumatic fracturing equipment on raw coal samples to investigate both hydraulic and pneumatic fracturing processes are conducted. Through these experiments, the relationship between pressure and crack formation and expansion are examined. The analysis reveals that the pore pressure gradient at the coal inlet reaches its peak during rapid surges in water pressure but diminishes over time. Conversely, the pore pressure gradient at the outlet side exhibits a gradual increase. Hydraulic fracturing is most likely to occur at the water inlet during sudden increases in water pressure. Besides, as the permeability of coal decreases, the duration for seepage stabilization prolongs due to the intensified pore pressure gradient resulting from sudden increases in water pressure. Moreover, an extended period of high hydraulic gradient further increases the risk of hydraulic fracturing. The experimental findings indicate that coal samples initially experience tensile failure influenced by water and air pressure. Subsequently, mode I cracks form under pressure, propagating along the fracture surface and becoming visible. The main types of failure observed in hydraulic and pneumatic fracturing are diametrical tensile failure, and the development of fractures can be categorized into three distinct stages, which contains the initial stage characterized by slight volume changes while water pressure increases, the expansion stage when pressure reaches the failure strength, and the crack closure stage marked by little or even decreasing volume changes during pressure unloading. The acoustic emission signal accurately corresponds to these three stages.
With the deep extension of coal mining in China, fault water inrush has become one of the major disasters threatening the safety production of coal mine. Based on the control equations of steady state and non-Darcy seepage in fractured rock mass, the multi-parameter nonlinear dynamic seepage equations of fractured rock mass are established in this paper. Based on the nonlinear dynamics theory, the function of the state variable in the system is derived, and the influence of the gradual change of non-Darcy flow factors on the structural stability of seepage system is studied. The research achievements show that there are three branches in the equilibrium state of the seepage system. Specifically, the stability of the equilibrium state changes abruptly near the limit parameter. The seepage dynamic system of fractured rock mass has the delayed bifurcation, and the coal mine disaster such as fault water inrush occurs easily at the bifurcation point. The research results are of great significance to enrich the theory of fault water inrush in coal mine, and to reveal the disastrous mechanism of fault water inrush and guide its prevention and control technology in coal mine, which can provide the theoretical reference for predicting the water seepage stability in fractured rock mass.
In order to reveal the disastrous mechanism of seepage instability of karst collapse column considering variable mass effect, a variable mass fluid–solid coupling mechanical model of water inrush is established, by considering the random distribution characteristics of a collapse column. Taking Qianjin coal mine as the research background, based on the Weibull distribution theory, the heterogeneous distribution characteristics of rock mass is described, and COMSOL Multiphysics numerical simulation software is employed to simulate the seepage characteristics and inrush water changes in collapse columns under different conditions of homogeneity, water pressure, and initial porosity. The research results show that the greater the homogeneity is, the more water conduction channels are formed, and the porosity increases accordingly, when considering the influence of different homogeneity on the seepage characteristics of broken rock mass, which eventually leads to water inrush accidents and a sharp increase in water inflow. Besides, when studying the seepage evolution law of different water pressures on a broken rock mass, an elevation of water pressure dramatically increases the porosity and seepage rate of the water. Over time, the broken rock particles gradually migrate and the fine particles are transported and eroded by the water flow, resulting in changes in the seepage characteristics and the formation of potential water diversion channels. Finally, when taking into account the effect of different initial porosity on the fractured rock mass seepage characteristics, the greater the original porosity is, the higher the seepage velocity is, and the particle migration increases the permeability. This leads to a more pronounced conductive water passage formation, which reveals the disastrous mechanism of seepage instability of karst collapse column considering variable mass effect.
Understanding the evolution of pore and fracture structures (PFSs) in coal under mining-induced unloading is essential for the prevention and control of gas disasters in coal mines. In this study, coal specimens from the Dongqu Mine, Taiyuan, Shanxi, were subjected to online triaxial nuclear magnetic resonance (NMR) tests under constant axial compression and stepwise confining pressure unloading conditions. Based on the measured T2 spectra, the evolution of PFSs, permeability, and pore space complexity during unloading was investigated, and fractal theory was used to quantify the structural complexity of the pore system. The results show that large pores and fractures (LPFs) exhibit the most pronounced volume variation during unloading and are most sensitive to stress change. Small pores (SPs) contribute negligibly to permeability, whereas permeability is controlled primarily by medium pores (MPs) and LPFs. During unloading, neither SPs nor the overall pore system exhibits clear fractal characteristics, whereas MPs and LPFs display distinct fractal behavior. In addition, pore-volume evolution is inconsistent with fractal dimension variation, indicating that pore-volume change alone cannot adequately characterize PFS complexity. The complexity of the pore system is governed mainly by new pore generation, the expansion of existing pores and fractures, and the interaction between competing processes such as compaction and expansion.
To reveal the damage–seepage coupling mechanism of delayed floor water inrush induced by small fault activation under mining-induced stress, a cubic cement mortar specimen containing a persistent small fault was prepared based on similarity theory. Systematic triaxial loading–seepage tests were conducted under different fault fracture zone particle gradations, fracture zone widths, and fault angles, with simultaneous monitoring of stress–strain behavior, acoustic emission (AE) characteristics, and seepage flow evolution. The results show that: ① The peak strength decreases with increasing fracture zone width, but increases with increasing Talbot gradation coefficient (a fractal grading method) and fault angle. The failure mode transitions from shear-dominated to tension–shear composite failure. The spatial localization of AE events corresponds well with macroscopic fracture surfaces, and the AE source amplitude is positively correlated with compressive strength. ② The seepage flow exhibits a nonlinear evolution pattern of “compaction stabilization—stepwise rise—plateau stabilization” during loading. In the early loading stage, compaction of the fracture zone causes a slight decrease in flow. Approaching peak strength, the initiation and propagation of through-going fractures create interconnected seepage channels, leading to a stepwise jump in flow. In the post-peak stage, accompanied by fine particle erosion and framework reconfiguration, the flow tends to stabilize. A larger fracture zone width, smaller gradation coefficient, and smaller fault angle result in a more significant post-peak seepage surge, with the maximum flow rate reaching 3.6 times that of the specimen with a 2 mm wide fracture zone. ③ Grey relational analysis indicates that the fault angle is the most sensitive factor affecting the risk of delayed water inrush (correlation degree 0.788), followed by particle gradation and fracture zone width. The study demonstrates that under monotonic loading conditions, the damage evolution and seepage response of small faults are jointly controlled by their geometric parameters and internal structure, with the fractal grading method effectively quantifying the role of particle gradation. The findings provide a theoretical basis for risk assessment of delayed water inrush from small faults in working faces above confined aquifers.
With the development of deep Earth engineering, the stability of surrounding rocks subjected to high temperatures from fire hazards has become an increasingly prominent issue. Therefore, studying the physical and mechanical properties of rocks under different thermal treatment modes is of great significance for the design of underground engineering. Taking red sandstone as the research object, this paper conducts physical parameter tests, uniaxial compression tests, and X-ray diffraction (XRD) on specimens under real-time high temperatures and natural cooling in the range of 600–1000 °C, to analyze the variations in specimen composition, the correlation between physical and mechanical properties and temperature, and to explore the underlying mechanisms. The results show that under both real-time high temperatures and natural cooling, the volume of sandstone increases while the mass decreases with rising temperature. At 1000 °C, the volume expansion rates are 3.30% and 3.80%, and the mass loss rates are 6.30% and 5.60%, respectively. Mechanical parameters, including peak strength, elastic modulus, and peak strain under the two treatments, all deteriorate significantly compared with those at room temperature. At 1000 °C, peak strength decreases by 54.83% and 36.26%, elastic modulus decreases by 74.55% and 67.96%, and peak strain increases by 65.63% and 43.75%, respectively. High-temperature-induced changes in the internal mineral structure and composition of sandstone are the main causes of rock mechanical property deterioration. During the cooling process, thermal shrinkage and recrystallization of mineral particles densify the rock structure; therefore, the compressive strength of naturally cooled sandstone is higher than that under real-time high temperatures. This study can provide theoretical guidance for the repair and reinforcement of rock engineering after high-temperature action.